[APP] SickBeard alpha-build507 for firmware V4+ (06/2015)

Live Counter

Note: Can’t see live counter image above? Try again later as my WDMyCloud is offline!

  • The ultimate PVR application that searches for and manages your TV shows.

  • Note that Sick Beard and SickRage runs on the same port 8081. Change either port from the WebGUI/config file if you plan to install both.

This is Sick Beard alpha-build507 with OpenSSL and UnRAR support for WDMyCloud V4 Firmware successfully built with 64K page size memory patch. For setups and details, refer to  http://sickbeard.com/.

For those interested on how to build from the source, refer to this  thread. It may help others to continue supporting the 64K page size memory for other packages. Below are my simplified instructions on how to get it installed on the V4 firmware (will not work on older firmwares). 

AND I have also made an online generic 64K page size memory package installer to simplify the installations of Debian packages on WDMyCloud. This will not work on older version 3 WD firmwares and I’m not planning to support it either as I’m sticking with the V4 firmwares. Based on dynamic server-side FastCGI, perl and shell scripts, I’ll be using this method for newer guides from now onwards. Feel free to parse the script codes. All bug reports, opinions and suggestions are welcomed.

The Generic Online Installer:

1) Auto download of required debs including its dependencies if any.
 
2) Debs installation in the required order to prevent dependency issues.
 
3) Auto run custom configurations if any.

If you proceed further, you are fully aware of the usual WD’s _warranty void _clauses including disclaimer from any damages that may resulted from this guide.

  • Enable SSH on your NAS from the WD DashBoard settings if not done so. SSH to your NAS port 22 using i.e. putty root@wdmycloud.

  • To proceed with the installation, first you need to get the username and password from me. The credentials will expire hourly e.g. “1AM,2AM,3AM…” to prevent intentional abuse on my network resources. Click on the link below to get the credentials :

    WDMyCloud | TeaNazaR.com

  • After obtaining the credentials, just copy & paste into the SSH terminal session of your WDMyCloud:

    export NAZAR78_USER=user; export NAZAR78_PASS=pass; export NAZAR78_KEYS=keys;

  • Then run the online installer on your WDMyCloud copy & paste as below, follow the instructions and enjoy (-:

    curl teanazar.com/installer.fcgi?sickbeard_alpha-build507|sh;

For quick backup and restore when WD release newer firmware update:

  • Before updating firmware:
    tar zcf /shares/Public/sickbeard.tar.gz ~/.config/sickbeard;

  • After updating firmware:
    tar xf /shares/Public/sickbeard.tar.gz -C /;

  • Run the online installer again. Your settings will be preserved and you may then remove the tar backup.

Online Installer change log:

[20150627] Added Sick Beard alpha-build507.
[20150629] Added support for OpenSSL and UnRAR.
[20160112] Added UnRAR v5.30 support.
[20160119] Fixed init.d could not find config path.

Hi there,

Thank you very much for sharing this information with the community.

Hi there,

thank you for your time.

Is it possible you port Sickrage or maybe the multilang Sickbeard fork from Cytec?

For german releases i actually still have to use my Sickbeard Server on PC :confounded:

Opawan wrote:

Hi there,

 

thank you for your time.

 

Is it possible you port Sickrage or maybe the multilang Sickbeard fork from Cytec?

 

For german releases i actually still have to use my Sickbeard Server on PC :confounded:

I’ll see what I can do with SickRage. Keep a look out soon…

Nazar78 wrote:


Opawan wrote:

Hi there,

 

thank you for your time.

 

Is it possible you port Sickrage or maybe the multilang Sickbeard fork from Cytec?

 

For german releases i actually still have to use my Sickbeard Server on PC :confounded:


I’ll see what I can do with SickRage. Keep a look out soon…

@Opawan

SickRage v4.0.29-4 added in another new post today, look for it you can’t missed :)

[20150629]
- Added support for OpenSSL and UnRAR.

Sick Beard updated to support OpenSSL and UnRAR. For those who’s already installed previously, just run the installer again.

I am having absolutely no luck here…I am new to MYCLOUD devices.

I have the McCloudEX2 with firmware

2.10.310

Is there a way to get this installed?

It’s only for My Cloud one drive variant. I don’t have the others i.e. Mirror/EX2/EX4 etc. to support.