Two WD nas devices on one network

Legacy Products My Cloud OS 3
1

hi, 

i have a WD sentinel which has been working fine, and i could access it remotely on 

subdomain.remotewebaccess.com (after i had set up port forwarding manually - it didnt work automatically)

i recently got a WD Mycloud, which has been connected to the same network. 

both devices are connected to the same router, by wire. have different IP addresses, and i can connect to both without issues, from the same network. 

i can connect to this remotely via Wd2go.com and appropriate user name password etc, 

however, i cannot now connect to the WD sentinel remotely. 

(makes sense, since port 80 and 443 are now being forwarded to the WD Mycloud). 

my question is - is there any simple way that i can have the WD sentinel also accessible remotely? 

thanks. 

mangal parihar

2

It should be automated NAT by your router’s upnp. Else you’ll need to manage your ports manually. For WD MyCloud, go to its Dashboard settings and set the ports manually. Settings->Cloud Access->Remote Access->Configure. I’m not sure about WD Sentinel but I assumed it’s almost the same concept.

Then setup manual port forward on your router to each device based on the settings above.

eg.

WD MyCloud  -  IP:192.168.1. 1 : 8 080/ 8 443

WD Sentinal   -  IP:192.168.1. 2 : 9 080/ 9 443