Issue registered.
Rolled back but the issue continue. Origin of the problem by ZDF?
People in Germany has also this issue?
Same here. I am on a wired network, and update over that everytime, never had an incident. Â This one seemed to go smoothly, no hicups. Â video_tsâs play fine (the only format I run, I ripped all my dvdâs to this format). Â Netflix seems ok. Â Pandora fine. Â Probably try Vudu soon too (really the only services I Â use regularly) Still canât get thumbnails with the media library turned on, starting to get comical that this is still a problem, but everything else I have tried seems fine. Â The thumbnail issue is that polish that makes this device great, and it is disappointing that we have had several fw updates since this broke and it still has not been fixed.Â
Everythingâs working fine.
âResolved skip to desired time is not available for certain video containers.â
That is fixed. It was getting to be annoying.
Does this version fix the component drop out problemÂ
http://community.wdc.com/t5/ideas/v1/ideapage/blog-id/Issues_LiveHub/article-id/627/page/1#comments
After upgrading I am not able to connect to youtube 
Iâm not able to connect to YouTube⊠It doesnât load at all⊠This is happening only after the upgrade. Any solution to this ??
Rolled back this upgrade and got back youtubeâŠregression testing is a myth :PÂ
Edited:
Here is the link for rollback/downgrade:
Guys i want to report that the new firmware is actually not working properly,
i have a 2tb WD Harddrive connected to the Hub via USB, when i start up the hub (full boot , not from sleep) because i always turn my hub completely off, the hub hangs for about 5 minutes every single time(its stuck on the WD Loading screen), i rolled back to the previous firmware ( 3.14.07) and the problem is gone.
anyone else with a harddrive hooked up to the hub expirience this everytime they reboot the hub?
i want to have the newest firmware but if it introduces a bug of this magnitutude where i have to wait 5 minutes for the device to start up then no thanks lol
Stephen_H wrote:
Does this version fix the component drop out problem
http://community.wdc.com/t5/ideas/v1/ideapage/blog-id/Issues_LiveHub/article-id/627/page/1#comments
NO!
M2TS and MTS files from Sony HX9 (Full HD) isnt working!!!Â
Netflix Brazil doenst work!!!Â
And it never will
The chipset cannot handle the files it creates, so commenting on every new firmware will not fix it, its a hardware limitation. You will need to recode it to get it to work.
I have not used this,not have your camera, but it came up in Google.
thr336mafia wrote:
Guys i want to report that the new firmware is actually not working properly,
i have a 2tb WD Harddrive connected to the Hub via USB, when i start up the hub (full boot , not from sleep) because i always turn my hub completely off, the hub hangs for about 5 minutes every single time(its stuck on the WD Loading screen), i rolled back to the previous firmware ( 3.14.07) and the problem is gone.
anyone else with a harddrive hooked up to the hub expirience this everytime they reboot the hub?
i want to have the newest firmware but if it introduces a bug of this magnitutude where i have to wait 5 minutes for the device to start up then no thanks lol
it is not really stuck, it is booting up and gathering the files from your external hard drive and compiling the library.
This takes about 4 minutes. I donât really think it is a bug it is just the way it is handling the entire booting procedure.
âŠand yes it is very annoying but at least it is recognizing the HDD again which it barely did in the previous version 
1 Like
For the support for Hauppague WinTV tuners, does this firmware also allow recording from the tuner to the WDTV Live Hub?
Has anyone tried this? I donât have one of these tuners, but am ready to buy one if recording is supported.
Thanks!
Wow my WDTV really had a mare with this update - did not like it one bit. Settings went crazy, nothing remembered. Network couldnât connect. Had to restart a total of 5 times to get it âworkingâ.
Rolled back to earlier firmwares. Geeze, lack of user testing on these firmwares or whatâŠ
1 Like
still canât play this file (with an old 2.7 FW i had zero problems playing this)
General
ID : 0
Complete name : Dave Matthews & Tim Reynolds - Live at Radio City Music Hall.ts
Format : MPEG-TS
File size : 35.7 GiB
Duration : 2h 49mn
Overall bit rate : 30.2 Mbps
Video
ID : 4129 (0x1021)
Menu ID : 1 (0x1)
Format : VC-1
Format profile : AP@L3
Duration : 2h 49mn
Width : 1 920 pixels
Height : 1 080 pixels
Display aspect ratio : 16:9
Frame rate : 23.976 fps
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : Progressive
Audio #1
ID : 4133 (0x1025)
Menu ID : 1 (0x1)
Format : AC-3
Format/Info : Audio Coding 3
Mode extension : CM (complete main)
Duration : 2h 49mn
Bit rate mode : Constant
Bit rate : 640 Kbps
Channel(s) : 6 channels
Channel positions : Front: L C R, Side: L R, LFE
Sampling rate : 48.0 KHz
Bit depth : 16 bits
Stream size : 774 MiB (2%)
Language : English
Audio #2
ID : 4134 (0x1026)
Menu ID : 1 (0x1)
Format : AC-3
Format/Info : Audio Coding 3
Format profile : TrueHD / Core
Mode extension : CM (complete main)
Duration : 2h 49mn
Bit rate mode : Variable / Constant
Bit rate : Variable / 640 Kbps
Maximum bit rate : 8 664 Kbps / 640 Kbps
Channel(s) : 6 channels
Channel positions : Front: L C R, Side: L R, LFE
Sampling rate : 96.0 KHz / 48.0 KHz
Bit depth : 16 bits
Language : English
But some firmwares ago, dont remember the number, these files worked properly!!! I will get the firm number and ill try to rollback to that version!!
Thanks for your help!!!
So i am correct right? with this new firmware, it takes about 5 minutes for the Hub to turn ON if there is a Harddrive connected to the hub via USB right, this is not the case with firmware 3.07.14, with a 2TB harddrive connected to the HUb via USB , it takes about 30 seconds to boot up and it doesnât freeze ond the WD LOADING screen.
1 Like
I am using a Slingplayer a lot .
It works fine until anyone starts using internet from the same router, then I get a "Connection lost "code 25Â message.
Have to connect again and again.
It hapens constantly while using th einternet for anything else.
Tried it in different house, the same problem.
I am very happy with the picture quality on slingplayer when working.
Slingcatcher takes all bandwith regardless what resolution you select.
WD takes only about 600 Kbps at lowest quality mode, good enough for a regular TV.
Stephen_H wrote:
Stephen_H wrote:
Does this version fix the component drop out problem
http://community.wdc.com/t5/ideas/v1/ideapage/blog-id/Issues_LiveHub/article-id/627/page/1#comments
NO!
You know, I donât normally complain in public forums but I feel I need to on this one.
One of the main reasons I purchase the WDC unit was the component video outputs, as my Runco 5801 doesnât have HDMI. This has been a known issue through MANY firmwares now, and it seems weâre no closer to having it addressed or solved. If it was an âextraâ or new feature that is still having the bugs worked out, then I could understand it, but this is BASIC SUPPORT for the hardware that was advertised, and built into the box.
This really isnât the support, or customer service that Iâve come to expect from Western Digital, and I hope that it can be addressed sometime soon.
Thank you.
This firmware doesnât work using WD TV LIVE HUB as Media Server and a Philips TV as Media Client.
I have just opened a Trouble and also I have performed rollback to the previous firmware.
Thank you.
