Increasing HDD capacity

[Panagiotis_Kostouros]

Hello,

I have an EX2 with 2x1TB HDDs in RAID1 and I want to change the HDDs by 2x3TB in RAID1 and keep the data.
I followed this procedure :

1. Turn off, replace old HDD #2 1TB with new 3TB
2. Turn on, rebuilt the RAID1
3. Turn off, replace old HDD #1 1TB with new 3TB
4. Turn on, rebuilt the RAID1

After that capacity remained to 1TB.
What can I do now ?

[TonyPh12345]

Expanding Capacity on EX2 with Raid 1

@Thorsten_M I did not try Simone’s suggestion as my method worked just fine for me. I found expand capacity from the following: get to My Cloud main menu click on ‘storage’ Under ‘Raid’ tab by ‘RAID Volume’, pick ‘Change RAID Mode’ It’ll warn you that it’ll interrupt the current services. Press ‘continue’ Pick RAID 1 and you should see ‘Expand Capacity’ option It will then prompt you to remove and replace one of the drives. Once replaced, it’ll start copying data, then prompt you to switch t…

[Panagiotis_Kostouros]

@TonyPh12345

‘continue’

Hello Tony

you are my man !
After your suggestion everything is OK

Thank you very much