I use the FTPRUSH client for ftp and have no problems on any server I connect to in regards to resuming files. The MyCloud does not resume a upload, it creates a new file with filename(1).extention on the first resume and it adds another (1) for every file resumed afterwards.
I have tried flashfxp as well and it has the same problem.
I need to be able to resume files as most of the files I transfer back and forth, with my post editing team and effects team. The files we sync back and forth are very large in GB. If it fails to upload and recreates it each time it tries to resume, having a mycloud instead of just using dropbox/googledrive/etc is not worth the headache.
I have tried doing this with a different program and i have been able to resume files with no problems, perhaps this could be something that has to do with the ftp clients you are using.
Does the FTP client program (FTPRush or Flashfxp) generate a log that indicates the specific error that occurs when the resume fails or doesn’t take place?
[T] 220-You are user number 1 of 10 allowed.
[T] 220-Local time is now 14:29. Server port: 1701.
[T] 220-This server supports FXP transfers
[T] 220 You will be disconnected after 10 minutes of inactivity.
[T] USER admin
[T] 331 User admin OK. Password required
[T] PASS (hidden)
[T] 230 OK. Current restricted directory is /
[T] SYST
[T] 215 UNIX Type: L8
[T] TYPE A
[T] 200 TYPE is now ASCII
[T] REST 1
[T] 350 Restarting at 1. But we’re in ASCII mode
[T] REST 0
[T] 350 Restarting at 0
[T] FEAT
[T] 211-Extensions supported:
[T] EPRT
[T] IDLE
[T] MDTM
[T] SIZE
[T] REST STREAM
[T] MLST type*;size*;sizd*;modify*;UNIX.mode*;UNIX.uid*;UNIX.gid*;unique*;
[T] MLSD
[T] ESTP
[T] PASV
[T] EPSV
[T] SPSV
[T] ESTA
[T] AUTH TLS
[T] PBSZ
[T] PROT
[T] UTF8
[T] 211 End.
[T] OPTS UTF8 ON
[T] 200 OK, UTF-8 enabled
[T] PWD
[T] 257 “/” is your current location
[T] CWD /MediaServerMain/Archive/StarTrekNewVoyages/
[T] 250 OK. Current directory is /MediaServerMain/Archive/StarTrekNewVoyages
[T] PWD
[T] 257 “/MediaServerMain/Archive/StarTrekNewVoyages” is your current location
[T] PASV
[T] 227 Entering Passive Mode (192,168,1,190,217,14)
[T] Opening data connection IP: xx.xx.xx.xx PORT: 55566
[T] MLSD
[T] 150 Accepted data connection
[T] 226-Options: -a -l
[T] 226 4 matches total
[T] List Complete: 515 bytes in 0.00 seconds (0.52KB/s)
[T] TYPE I
[T] 200 TYPE is now 8-bit binary
[T] PASV
[T] 227 Entering Passive Mode (192,168,1,190,217,10)
[T] Opening data connection IP: xx.xx.xx.xx PORT: 55562
[T] REST 0
[T] 350 Restarting at 0
[T] STOR TormentOfDestinyraw(1).mp4
[T] 150 Accepted data connection
I have every file exist setting setup to ask me every time on when there’s a file already on the server. I always tell it to resume… Resuming works on my website ftp server without issues.
