Repository with software worked on v4 firmware

Fox_exe · January 27, 2015, 2:40pm

Yes. But you got “old” versions of software.

Use “sid” repo for get latest transmission and minidlna. (deb http://anionix.ddns.net wheezy-64k sid)

andrew01 · January 27, 2015, 9:22pm

I tried to install minidlna but there are some problem with dependencies:

The following packages have unmet dependencies:
 minidlna : Depends: libavformat56 (>= 6:11~beta1) but it is not going to be installed
            Depends: libflac8 (>= 1.3.0) but 1.2.1-6 is to be installed
            Depends: libjpeg62-turbo (>= 1.3.1) but it is not installable
E: Unable to correct problems, you have held broken packages.

should I add into sources.list also wheeze-64k main repository?

Best regards

Andrew

Yultan · January 28, 2015, 11:24am

Thank you for this repository !

Would it be possible to add the package rtorrent ? It’s a simple and powerful command line bittorrent client

Fox_exe · January 28, 2015, 12:25pm

andrew01 wrote:

should I add into sources.list also wheeze-64k main repository?

No. I miss few packets in repo.

Try install minidlna again.

Yultan wrote:

Would it be possible to add the package rtorrent ? It’s a simple and powerful command line bittorrent client

Yes. In progress…

andrew01 · January 28, 2015, 7:48pm

Hello For_exe, > thank you in advance for your patience but I still have some problems:> WDMyCloud:~# apt-get update
Ign http://anionix.ddns.net wheezy-64k Release.gpg
Hit http://anionix.ddns.net wheezy-64k Release
Ign http://anionix.ddns.net wheezy-64k/sid armhf Packages/DiffIndex
Get:1 http://anionix.ddns.net wheezy-64k/sid armhf Packages [87.6 kB]
Ign http://anionix.ddns.net wheezy-64k/sid Translation-en
Fetched 1 B in 3s (0 B/s)
W: Failed to fetch gzip:/var/lib/apt/lists/partial/anionix.ddns.net_dists_wheezy-64k_sid_binary-armhf_Packages Hash Sum mismatch

E: Some index files failed to download. They have been ignored, or old ones used instead.
WDMyCloud:~# apt-get install minidlna
Reading package lists… Done
Building dependency tree
Reading state information… Done
Some packages could not be installed. This may mean that you have
requested an impossible situation or if you are using the unstable
distribution that some required packages have not yet been created
or been moved out of Incoming.
The following information may help to resolve the situation:

The following packages have unmet dependencies:
minidlna : Depends: libavformat56 (>= 6:11~beta1) but it is not going to be installed
Depends: libflac8 (>= 1.3.0) but 1.2.1-6 is to be installed
Depends: libjpeg62-turbo (>= 1.3.1) but it is not installable
E: Unable to correct problems, you have held broken packages.

I’m also a liitle bit confused in linux version in V4 firmware, when I check the *-release file it shows:

WDMyCloud:~# cat /etc/*-release
PRETTY_NAME=“Debian GNU/Linux 7 (wheezy)”
NAME=“Debian GNU/Linux”
VERSION_ID=“7”
VERSION=“7 (wheezy)”
ID=debian
ANSI_COLOR=“1;31”
HOME_URL=“http://www.debian.org/”
SUPPORT_URL=“Debian -- User Support”
BUG_REPORT_URL=“http://bugs.debian.org/”

but in sources.list after the firmware update I had uncomented only the line with jessie:

WDMyCloud:~# cat /etc/apt/sources.list
deb http://ftp.us.debian.org/debian/ jessie main

Note, wheezy is not 64K page aligned.

##deb http://ftp.us.debian.org/debian/ wheezy main
#deb http://ftp.us.debian.org/debian/ sid main
#deb http://ftp.us.debian.org/debian/ experimental main
#deb-src http://ftp.us.debian.org/debian/ jessie main

so maybe I should use the wheeze-64k main repository?

Best regards

Andrew

Fox_exe · January 29, 2015, 4:08am

Yes. Dont use official debian repos because in v4 firmware need soft with PageSize=64kb (In debian.org - standart 4kb).

So, if you install something from debian.org - you can brick you device.

willkan · January 29, 2015, 5:29am

Thanks for your repository. It helps me a lot.

I want a software named mediaelch.

I don’t know where the official debian repository locates, so I found the mediaelch source in the url http://ppa.launchpad.net/kvibes/mediaelch/ubuntu/dists/precise/main/debian-installer/

Could you add this software to your repository?

andrew01 · January 29, 2015, 7:15pm

Fox_exe wrote:

Yes. Dont use official debian repos because in v4 firmware need soft with PageSize=64kb (In debian.org - standart 4kb).

So, if you install something from debian.org - you can brick you device.

Many thanks to you Fox_exe for your great support, now I can install miniDLNA.

I’m missing only the one small package which I used to, nmon - could you recompile it?

Best regards

Andrew

alirz1 · February 1, 2015, 12:37am

Looks like i will never get “flexget” for FW 4.x

Does anyone know of any torrent downloader from a torrent RSS feed? i would like to upgrade m wd cloud to FW 4.x but really need some rss torrent downloader…

thanks

joskevermeulen · February 2, 2015, 4:37pm

I can’t seem to get nzbget working. After install I only end up with new files in the following 2 locations:

/usr/bin/nzbget
/usr/share/doc/nzbget

With a working nzbget on v3 firmware, I remember there being a lot more installed files. Am I doing something wrong, or might there be files missing in the repo?

Fox_exe · February 2, 2015, 6:01pm

alirz1 wrote:

Looks like i will never get “flexget” for FW 4.x

Need it? Make it!

Python and python-pip available in repo.

Flexget can be installed from pip (Python package manager)

alirz1 · February 2, 2015, 6:28pm

Fox_exe wrote:

alirz1 wrote:

Looks like i will never get “flexget” for FW 4.x

Need it? Make it!

Python and python-pip available in repo.

Flexget can be installed from pip (Python package manager)

@Fox_exe

If i knew how to compile linux packages i would have attempted to MAKE it. But unfortunately i dont know.

Yes, as you said it is installed from PIP.

Heres “Flesget” source if someone is willing to help me out with creating the package compatible with FW4.x ?

https://dl.dropboxusercontent.com/u/4883446/FlexGet-1.2.271.tar.gz

alirz1 · February 2, 2015, 9:38pm

I tried to install “python PIP” manually via deb downloaded from @Fox_exe’s repo

but i got this:

python-pip depends on python2.6; however:
Package python2.6 is not installed.
python-pip depends on python-pkg-resources; however:
Package python-pkg-resources is not installed.
python-pip depends on python-setuptools (>= 0.6c1); however:
Package python-setuptools is not installed.

dpkg: error processing python-pip (–install):
dependency problems - leaving unconfigured
Processing triggers for man-db …

I notice that those dependencies dont exist anywhere on the repo either under MAIN or SID…

On another note the WD cloud dirve already seems to be running Python 2.7.3. Python still seems to be complaining about requiring 2.6?

4elovek · February 4, 2015, 12:29pm

привет

mldonkey-server соберешь?

и в шапку добавь как ставить из sid свежий транс

спасибо!

Fox_exe · February 4, 2015, 4:01pm

4elovek wrote:

mldonkey-server соберешь?

Отправил на сборку. Через пару часов соберется.

***

mldonkey-server will be added soon.

bam2000 · February 4, 2015, 9:19pm

hey, i want to install NZBGet on my WD My Cloud with this Repo, but it dont work, any ideas?

alirz1 · February 7, 2015, 1:08am

@Fox_exe

I tried using your repository.

After running apt-get update

i tried to intall “python-pip” but i go the following. looks like dependencies are missing.

WDMyCloud:~# apt-get install python-pip
Reading package lists… Done
Building dependency tree
Reading state information… Done
You might want to run ‘apt-get -f install’ to correct these:
The following packages have unmet dependencies:
python-pip : Depends: python2.6 but it is not going to be installed
Depends: python-pkg-resources but it is not installable
Depends: python-setuptools (>= 0.6c1) but it is not installable
Recommends: python-dev-all (>= 2.6) but it is not installable
Recommends: build-essential but it is not installable

i also tried to install “python” but i believe a version of python already comes installed on WD mycloud

WDMyCloud:~# apt-get install python
Reading package lists… Done
Building dependency tree
Reading state information… Done
python is already the newest version.
python set to manually installed.
You might want to run ‘apt-get -f install’ to correct these:
The following packages have unmet dependencies:
python-pip : Depends: python2.6 but it is not going to be installed
Depends: python-pkg-resources but it is not installable
Depends: python-setuptools (>= 0.6c1) but it is not installable
Recommends: python-dev-all (>= 2.6) but it is not installable
Recommends: build-essential but it is not installable

i dont want to run “apt-get -f install” because from my past experience with the wd cloud drive, that command ends up bricking the drive.