Hello there,
First of all, sorry for my english, I’m french native.
I’ve brought a Mycloud (1 disc only) few years ago, I’m able to access it through windows explorer when I’m home, connected to the same network.
Is it possible to so the same when I’m abroad ? I can access it through the WD My Cloud Application but I’d like to see it in my Explorer.
THanks in advance !
Have a good evening.
No, it is no longer possible to do remote mapping via a WD-supported method.
But there are unofficial alternatives. See this thread for a very similar question:
Hi guys,
I am looking for an answer in many threads and forums but without any good result.
Basically I want to have the connection from my university to my MyCloud at my home. Airport Express is the router. Let’s say, I have IP (from provider) 1.2.3.4.
I went to set up in MyCloud the HTTP as port 80, and HTTPS as port 443.
I went to Airport Express and made:
Router Mode: DHCP and NAT
[DHCP Reservations]
Reserved Adress by: MAC Adress
MAC Adress: adress from wdmycloud.local
IPv4 Adress:…
WD officially removed the ability to remote map the My Cloud last year when they released the OS 3 firmware.
Unofficially, see the CloudDAVMod which will allow one to remote map the My Cloud. Note however it requires the use of SSH to install the CloudDAVMod module.
https://community.wd.com/t/app-clouddavmod-v1-0-for-firmware-v4-05-2016/161543
Also there is a thread on this very same subject (remote mapping) occurring right now at the following link:
https://community.wd.com/t/howto-airport-express-mycloud-remote-access-via-finder-mac-os-x/170063
Thank you guyz, I found it I have a small issue I stated in this post :
Hi Nazar,
First, I wanted to thank you for all your work.
I was able to install the DAVMod on my MyCloud v04.04.03-113, I went to “https://mycloud#####/MyCloud#####/ ” without difficulties but when I want to go on “HTTPS://device#######-########.wd2go.com[:PORT]/HOSTNAME ” stated in the help section, it says :
You don’t have permission to access /MyCloud##### on this server.
Additionally, a 404 Not Found error was encountered while trying to use an ErrorDocument to handle the request.
I tried…
Thanks again