Where to find info latest firmware version WD6003FFBX

On Ubuntu with kernel 6.0.11 and new 6.6.4 I have several of the following failure:

[Wed Dec  6 18:53:02 2023] ata10.00: exception Emask 0x0 SAct 0x80000 SErr 0x0 action 0x6 frozen
[Wed Dec  6 18:53:02 2023] ata10.00: failed command: READ FPDMA QUEUED
[Wed Dec  6 18:53:02 2023] ata10.00: cmd 60/08:98:20:79:c0/00:00:98:01:00/40 tag 19 ncq dma 4096 in
                                    res 40/00:ff:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[Wed Dec  6 18:53:02 2023] ata10.00: status: { DRDY }
[Wed Dec  6 18:53:02 2023] ata10: hard resetting link
[Wed Dec  6 18:53:02 2023] ata10: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[Wed Dec  6 18:53:02 2023] ata10.00: configured for UDMA/133
[Wed Dec  6 18:53:02 2023] ata10: EH complete

The disk seems to be fine, see below for smartctl log.

Firmware Version: 83.00A83
Is there an update available, where are the current firmware versions listed?

Thanks

Model Family:     Western Digital Red Pro
Device Model:     WDC WD6003FFBX-68MU3N0
Serial Number:    V8H1ADJR
LU WWN Device Id: 5 000cca 098ceb2ee
Firmware Version: 83.00A83
User Capacity:    6,001,175,126,016 bytes [6.00 TB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    7200 rpm
Form Factor:      3.5 inches
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ACS-2, ATA8-ACS T13/1699-D revision 4
SATA Version is:  SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Thu Dec  7 01:56:57 2023 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000b   100   100   016    Pre-fail  Always       -       0
  2 Throughput_Performance  0x0004   133   133   054    Old_age   Offline      -       92
  3 Spin_Up_Time            0x0007   160   160   024    Pre-fail  Always       -       379 (Average 373)
  4 Start_Stop_Count        0x0012   100   100   000    Old_age   Always       -       1002
  5 Reallocated_Sector_Ct   0x0033   100   100   005    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000a   100   100   067    Old_age   Always       -       0
  8 Seek_Time_Performance   0x0004   128   128   020    Old_age   Offline      -       18
  9 Power_On_Hours          0x0012   095   095   000    Old_age   Always       -       38441
 10 Spin_Retry_Count        0x0012   100   100   060    Old_age   Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       196
192 Power-Off_Retract_Count 0x0032   082   082   000    Old_age   Always       -       22071
193 Load_Cycle_Count        0x0012   082   082   000    Old_age   Always       -       22071
194 Temperature_Celsius     0x0002   139   139   000    Old_age   Always       -       43 (Min/Max 22/51)
196 Reallocated_Event_Count 0x0032   100   100   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0022   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0008   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x000a   200   200   000    Old_age   Always       -       0

SMART Error Log Version: 1
No Errors Logged

Hi @Fritz_Herbers ,

Have you opened a Support Case? If not opened, for more information, please contact the WD Technical Support team for the best assistance and troubleshooting:

Thanks for your reply. Created a support case.