Is there a 8 tb img here and step by step instruction

[Bennor]

@kummah

1. If i understand your post correctly, the instructions work with any size - Right?
2. There are mentions that there is an end sector number required that is dependent upon the size of the disk. Would you know for 10TB?

I took an 8TB EasyStore drive and put it into a first gen single bay My Cloud following Fox_Exe’s directions. My experience is posted in this post:

8TB wd red drives

Success! The WD EasyStore 8TB drive I purchased from Best Buy was made in Thailand. And it is the 256mb cache WD Red version. My Cloud enclosure was a first gen version. I used Fox_Exe’s unbricking directions for unbricking/replacing HDD for first gen’s. https://drive.google.com/file/d/0B_6OlQ_H0PxVbzZac0plbkZKeGM/view The those directions have a broken link to the archive file one needs to download. I used the original_v04.01.02-417.tar.gz file: https://drive.google.com/open?id=0B_…

I did not make any changes to the directions, I did not know or as far as I know change the “end sector” number to match the 8TB WD Red drive. I followed Fox_Exe’s directions exactly using the values for the partitions indicated in the directions. The My Cloud firmware should resize the user data partition automatically to fill the available space when one reboots the My Cloud after performing the various steps. I used a Linux Ubuntu boot CD to perform the various steps.

The second gen single bay My Cloud has a slightly different set of steps to that of the first gen My Cloud and uses different firmware.