HGST Travelstar 7K1000 firmware

I am looking for firmware upgrade HGST HTS721010A9E630 (firmware:JB0OA3U0 [A3U0]).

Drive passes all tests but system is very slow. No bad, remapped sectors or pending sectors. Seems there is newer firmware(JB0DB490[B490]) which solves this but only for DELL computers.

Fixes & Enhancements:
Fixes:

  • Fixed bug that cause a performance drop in a certain configuration.

S.M.A.R.T.

Summary

HGST Health

ID Current Worst ThresholdData Status
(01) Raw Read Error Rate 100 100 62 0 Ok
(02) Throughput Performance 100 100 40 0 Ok
(03) Spin Up Time 119 119 33 2 Ok
(04) Start/Stop Count 100 100 0 1159 Ok
(05) Reallocated Sector Count 100 100 5 0 Ok
(07) Seek Error Rate 100 100 67 0 Ok
(08) Seek Time Performance 100 100 40 0 Ok
(09) Power On Hours Count 83 83 0 7651 Ok
(0A) Spin Retry Count 100 100 60 0 Ok
(0C) Power Cycle Count 100 100 0 1159 Ok
(BF) G-sense Error Rate 100 100 0 0 Ok
(C0) Power Off Retract Count 100 100 0 1310763 Ok
(C1) Load Cycle Count 72 72 0 288730 Ok
(C2) Temperature 153 153 0 524327 Ok
(C4) Reallocated Event Count 100 100 0 0 Ok
(C5) Current Pending Sector 100 100 0 0 Ok
(C6) Offline Uncorrectable 100 100 0 0 Ok
(C7) Ultra DMA CRC Error Count 200 200 0 0 Ok
(DF) Load/Unload Retry Count 100 100 0 0 Ok

Power On Time : 7651
Health Status : Ok

The DELL update fails with error IOCTL_SCSI_MINIPORT ioctl failed: 1117

Summary

wd_download version 1.7.0.0 using Turquoise 1.12.7.3
Copyright © 2009-2018, Western Digital Technologies, Inc.

This application can activate firmware on the following WD drives.

Number of WD drives found = 1

Dev Model Serial Number FW Rev Type
0 HGST HTS721010A9E630 JR1000D30VB3VE JB0OA3U0 ATA

Are you certain that you want to activate firmware on one or more of the
drives listed above? Enter your drive selection(s) as described below.

‘N’, ‘n’ or = DO NOT activate firmware

‘ALL’ or ‘all’ = Activate firmware on all drives listed above

Specify a comma-separated list of drive numbers; the list may include a
dash-separated range of drive numbers (e.g., 4,6,8,12-15)

Enter your drive selection(s): 0

Device 0 = HGST HTS721010A9E630 JR1000D30VB3VE FW JB0OA3U0
Downloading firmware (I/O transfer length = 131072) …
task file register status=0x51 lbaLow=0x0 secCount=0x1 error=0x0

Downloading firmware (I/O transfer length = 131072) …

FAILURE: IOCTL_SCSI_MINIPORT ioctl failed: 1117
Error Code: 2
Firmware Download and Activate Summary
Successful Download and Activations = 0
Failed Download and Activations = 1