Ghosting on image, component out

Wondering if anyone has had this issue.

wd tv is connected to a projector via component and causes a double image, it does not through composite.

I have the latest firmware, it is not the cable or projector as it works fine with dvd and ps3 using the same cable.

Component out connected to tv is fine.

Any help would be appreciated.

Im assuming that Once you have Selected Component Out on your HUB …

Setup > Audio/Video > Video Output > Component 

That you’ve tried all the output resolutions and hertz settings ?


480p 60Hz

576p 50Hz

720p 50Hz

720p 60Hz

1080i 50Hz

1080i 60Hz

Have tried that, the projector is capable of all inputs although its native resolution is 854 x 480

Are there settings on your Projector that you can change / adjust ?

Apart from that, i cant think of anything else :cry:

No there isn’t.

What I can’t understand is why it is only the wd live and why it doesn’t do it on my tv.

The only thing I can think of is that it is a conflict between those two.

That would be a bummer, because the picture on the tv is awesome.