JoeySmyth wrote:
wzirkz wrote:
Tonight I will try (with a pin in reset) to flash the device to the previous firmware, hope that this will help
Pressing the reset hole will not “Flash” the device to the previous firmware… it just resets all the settings to factory default.
(you will still be running the same firmware )
If you wish to flash to previous Firmware… aka “_ Rollback Firmware _” please follow my guide here …
Oh gosh, that was a poor word choice from me, Joey, with ‘flashing’ I ment reset back to factory default, I’m sorry!
I had found the guide to rollback firmware earlier, I will use this tonight, thank you!
By the way (I forgot to mention in previous post), I have tried to start the device without LAN cable, like topic starter did, but that did not help in my case, the device kept on going in reboot loop.
