AdFly did some flawed changes at their end without considering the consequences, so make sure you disable any popup blockers. I did a quick fix at my side, please try again.
Wonderful ! It’s working perfectly now.
Thanks a lot !!
Hello
What might be the reason that transmission ver 2.92 consumes almost 50% of CPU time while there are no torrents active
WDMyCloud:~# ps auxwwwf
USER PID %CPU %MEM VSZ RSS TTY STAT START TIME COMMAND
root 2 0.0 0.0 0 0 ? S Oct12 0:00 [kthreadd]
root 3 0.0 0.0 0 0 ? D Oct12 0:00 _ [cpu1_hotplug_th]
root 4 1.0 0.0 0 0 ? S Oct12 10:37 _ [ksoftirqd/0]
root 7 0.0 0.0 0 0 ? S Oct12 0:00 _ [migration/0]
root 8 0.0 0.0 0 0 ? S Oct12 0:00 _ [migration/1]
root 10 0.0 0.0 0 0 ? S Oct12 0:07 _ [ksoftirqd/1]
root 11 0.0 0.0 0 0 ? S< Oct12 0:00 _ [khelper]
root 12 0.0 0.0 0 0 ? S Oct12 0:00 _ [kworker/u:1]
root 230 0.0 0.0 0 0 ? S Oct12 0:00 _ [sync_supers]
root 232 0.0 0.0 0 0 ? S Oct12 0:00 _ [bdi-default]
root 234 0.0 0.0 0 0 ? S< Oct12 0:00 _ [kblockd]
root 240 0.0 0.0 0 0 ? S< Oct12 0:00 _ [ata_sff]
root 251 0.0 0.0 0 0 ? S Oct12 0:00 _ [khubd]
root 257 0.0 0.0 0 0 ? S< Oct12 0:00 _ [md]
root 280 0.0 0.0 0 0 ? S< Oct12 0:00 _ [rpciod]
root 293 0.5 0.0 0 0 ? S Oct12 5:31 _ [kswapd0]
root 294 0.0 0.0 0 0 ? S Oct12 0:00 _ [fsnotify_mark]
root 295 0.0 0.0 0 0 ? S< Oct12 0:00 _ [nfsiod]
root 296 0.0 0.0 0 0 ? S< Oct12 0:00 _ [crypto]
root 334 0.0 0.0 0 0 ? S Oct12 0:00 _ [scsi_eh_0]
root 337 0.0 0.0 0 0 ? S Oct12 0:00 _ [scsi_eh_1]
root 340 0.0 0.0 0 0 ? S Oct12 0:00 _ [kworker/u:2]
root 351 0.0 0.0 0 0 ? S< Oct12 0:00 _ [comcerto_spi.1]
root 353 0.0 0.0 0 0 ? S< Oct12 0:00 _ [comcerto_spi.0]
root 402 1.0 0.0 0 0 ? D Oct12 9:41 _ [btn_t]
root 412 0.0 0.0 0 0 ? S Oct12 0:00 _ [a3gblink_t]
root 437 0.0 0.0 0 0 ? S Oct12 0:03 _ [md1_raid1]
root 439 0.0 0.0 0 0 ? S Oct12 0:00 _ [kjournald]
root 2483 0.4 0.0 0 0 ? D Oct12 4:40 _ [pfe_ctrl_timer]
root 4385 0.7 0.0 0 0 ? S Oct12 7:32 _ [flush-8:0]
root 4409 0.0 0.0 0 0 ? S Oct12 0:19 _ [jbd2/sda4-8]
root 4410 0.0 0.0 0 0 ? S< Oct12 0:00 _ [ext4-dio-unwrit]
root 5925 0.0 0.0 0 0 ? S Oct12 0:06 _ [knetatop]
root 6262 0.0 0.0 0 0 ? S Oct12 0:00 _ [lockd]
root 6263 0.0 0.0 0 0 ? S Oct12 0:00 _ [nfsd]
root 6264 0.0 0.0 0 0 ? S Oct12 0:00 _ [nfsd]
root 6265 0.0 0.0 0 0 ? S Oct12 0:00 _ [nfsd]
root 6266 0.0 0.0 0 0 ? S Oct12 0:00 _ [nfsd]
root 6267 0.0 0.0 0 0 ? S Oct12 0:00 _ [nfsd]
root 6268 0.0 0.0 0 0 ? S Oct12 0:00 _ [nfsd]
root 6269 0.0 0.0 0 0 ? S Oct12 0:00 _ [nfsd]
root 6270 0.0 0.0 0 0 ? S Oct12 0:00 _ [nfsd]
root 20093 0.3 0.0 0 0 ? S 00:35 2:41 _ [kworker/1:2]
root 11784 0.2 0.0 0 0 ? S 08:44 0:37 _ [kworker/1:1]
root 15099 0.0 0.0 0 0 ? S 10:26 0:00 _ [flush-9:1]
root 20680 0.1 0.0 0 0 ? S 12:02 0:07 _ [kworker/0:0]
root 24551 0.1 0.0 0 0 ? S 12:56 0:01 _ [kworker/0:1]
root 1 0.0 0.4 3264 1088 ? Ss Oct12 0:17 init [2]
root 2069 0.0 0.3 4480 896 ? Ss Oct12 0:00 udevd --daemon
root 2532 0.0 0.3 4416 896 ? S Oct12 0:00 _ udevd --daemon
root 2533 0.0 0.3 4416 896 ? S Oct12 0:00 _ udevd --daemon
root 3927 0.0 0.5 3328 1344 ? Ss Oct12 0:06 /sbin/rpcbind -w
root 4170 0.0 1.0 32384 2368 ? Sl Oct12 0:52 /usr/sbin/rsyslogd -c5
root 4233 0.0 0.7 55232 1792 ? Ss Oct12 0:12 /usr/sbin/apache2 -k start
www-data 22234 0.0 0.7 57152 1664 ? S 12:24 0:00 _ /usr/sbin/apache2 -k start
www-data 23508 0.0 0.5 57152 1216 ? S 12:41 0:00 _ /usr/sbin/apache2 -k start
root 4260 0.0 0.3 3328 832 ? Ss Oct12 0:00 /sbin/mdadm --monitor --pid-file /run/mdadm/monitor.pid --daemonise --scan --syslog
root 5107 0.0 0.4 2112 1024 ? S Oct12 0:07 /usr/sbin/ifplugd -i eth0 -q -f -u0 -d5 -w -I
root 5151 0.0 0.2 1920 576 ? S Oct12 0:00 /usr/local/bin/wd-btnd /dev/input/button system 4 /usr/local/sbin/resetButtonAction.sh
root 5933 0.0 0.4 1920 1024 ? S< Oct12 0:28 /usr/bin/atopacctd /tmp/atopacct
root 5995 0.0 0.3 9408 896 ? Ss Oct12 0:00 /usr/sbin/sshd
root 25232 0.0 0.9 13824 2176 ? Ss 13:04 0:00 _ sshd: root@pts/0
root 25234 0.0 1.1 6144 2688 pts/0 Ss 13:04 0:00 _ -bash
root 25952 0.0 1.2 3968 2944 pts/0 R+ 13:14 0:00 _ ps auxwwwf
root 6028 0.0 0.9 3584 2304 ? S Oct12 0:00 /bin/sh /usr/local/sbin/monitorTemperature.sh
root 25760 0.0 0.5 1984 1280 ? S 13:11 0:00 _ sleep 1800
root 6086 0.0 0.9 3584 2304 ? SN Oct12 0:21 /bin/bash /usr/local/sbin/monitorio.sh
root 25948 0.0 0.5 1984 1280 ? SN 13:14 0:00 _ sleep 60
root 6274 0.0 0.3 4352 832 ? Ss Oct12 0:00 /usr/sbin/rpc.mountd --manage-gids
root 6332 0.0 0.2 3200 640 ? S Oct12 0:00 /bin/sh /etc/rc2.d/S20restsdk-serverd start
root 6334 0.3 3.0 883264 7104 ? Sl Oct12 3:19 _ /usr/local/restsdk/restsdk-server -device-kind sequoia
root 6356 0.0 1.0 7552 2432 ? Ss Oct12 0:25 /usr/sbin/nmbd -D
root 6360 0.0 1.2 35008 2944 ? Ss Oct12 0:07 /usr/sbin/smbd -D
root 6370 0.0 1.2 35008 2944 ? S Oct12 0:05 _ /usr/sbin/smbd -D
root 6397 0.0 0.2 5504 576 ? S Oct12 0:00 /usr/sbin/vsftpd
root 6409 0.0 1.0 28352 2432 ? Ss Oct12 0:02 /usr/sbin/winbindd
root 6413 0.0 1.6 28352 3776 ? S Oct12 0:02 _ /usr/sbin/winbindd
root 6444 0.0 0.5 8000 1344 ? S Oct12 0:07 /usr/sbin/netatalk -F /etc/netatalk/afp.conf
root 6446 0.0 0.3 11136 896 ? S Oct12 0:00 _ /usr/sbin/afpd -d -F /etc/netatalk/afp.conf
dzmitryj 19978 0.0 0.5 24960 1280 ? S 00:33 0:17 | _ /usr/sbin/afpd -d -F /etc/netatalk/afp.conf
hanna 12853 0.2 0.7 27840 1792 ? S 09:25 0:28 | _ /usr/sbin/afpd -d -F /etc/netatalk/afp.conf
root 6447 0.0 0.3 7744 896 ? S Oct12 0:00 _ /usr/sbin/cnid_metad -d -F /etc/netatalk/afp.conf
root 8858 0.2 0.9 28544 2176 ? S Oct12 2:30 _ /usr/sbin/cnid_dbd -F /etc/netatalk/afp.conf -p /DataVolume/shares/TimeMachineBackup -t 7 -l 5
root 6525 0.0 0.3 2112 768 ? Ss Oct12 0:03 /usr/local/bin/mDNSResponderPosix -b -f //etc/nas/mDNSResponder.conf -P /var/run/mDNSResponder.pid
root 6864 0.0 1.0 71232 2496 ? Sl Oct12 0:53 /usr/local/bin/upnp_nas_device -webdir /var/local/upnp_nas_device -desc nasdevice.xml
root 6918 3.7 0.4 54848 960 ? SNsl Oct12 35:40 /usr/local/bin/forked-daapd
root 6965 2.8 3.3 38528 7872 ? Sl Oct12 27:50 /usr/local/wdmcserver/bin/wdmcserver -x on
root 7009 0.0 1.2 21504 2816 ? SNs Oct12 0:09 /usr/local/orion/communicationmanager/communicationmanager -f 120 -l 5
root 7020 1.7 1.7 41472 3968 ? Sl Oct12 16:39 /usr/local/wdmcserver/bin/wdphotodbmerger
root 7070 0.0 0.3 2112 896 ? S Oct12 0:05 /usr/local/bin/lld2d eth0
root 7101 0.1 1.1 16512 2688 ? Ssl Oct12 1:35 /usr/local/bin/wdnotifier
root 7180 0.0 0.3 3840 896 ? Ss Oct12 0:00 /usr/local/bin/wdAutoMounter
root 7238 0.0 0.8 20992 1920 ? SNs Oct12 0:14 /usr/local/bin/onbrdnetloccomm -l 5
root 7435 0.0 0.3 2944 768 ttyS0 Ss+ Oct12 0:00 /sbin/getty -L ttyS0 115200 vt100
root 8475 0.0 0.3 2368 832 ? S Oct12 0:00 /usr/local/twonkymedia-7/twonkystarter -D -ip 10.15.0.1 -httpport 9000 -appdata /CacheVolume/twonkymedia -logfile /CacheVolume/twonkymedia/twonkymedia-log.txt
root 8477 1.4 3.7 47360 8768 ? Sl Oct12 13:34 _ /usr/local/twonkymedia-7/twonkyserver -D -ip 10.15.0.1 -httpport 9000 -appdata /CacheVolume/twonkymedia -logfile /CacheVolume/twonkymedia/twonkymedia-log.txt
root 15519 49.5 6.0 118528 13952 ? Ssl Oct12 417:59 transmission-daemon
root 19782 0.0 0.5 4032 1280 ? Ss 00:30 0:04 /usr/sbin/cron
root 11397 0.5 3.1 8000 7424 ? S<L 08:01 1:51 /usr/bin/atop -a -w /var/log/atop/atop_current 60
settings. json
WDMyCloud:~# cat /root/.config/transmission-daemon/settings.json
{
“alt-speed-down”: 50,
“alt-speed-enabled”: false,
“alt-speed-time-begin”: 540,
“alt-speed-time-day”: 127,
“alt-speed-time-enabled”: false,
“alt-speed-time-end”: 1020,
“alt-speed-up”: 50,
“bind-address-ipv4”: “0.0.0.0”,
“bind-address-ipv6”: “::”,
“blocklist-enabled”: false,
“blocklist-url”: “http://www.example.com/blocklist”,
“cache-size-mb”: 2,
“dht-enabled”: true,
“download-dir”: “/DataVolume/shares/Video”,
“download-queue-enabled”: true,
“download-queue-size”: 1,
“encryption”: 0,
“idle-seeding-limit”: 5,
“idle-seeding-limit-enabled”: false,
“incomplete-dir”: “/DataVolume/shares/Video”,
“incomplete-dir-enabled”: false,
“lpd-enabled”: false,
“message-level”: 2,
“peer-congestion-algorithm”: “”,
“peer-id-ttl-hours”: 6,
“peer-limit-global”: 200,
“peer-limit-per-torrent”: 5,
“peer-port”: 51413,
“peer-port-random-high”: 65535,
“peer-port-random-low”: 49152,
“peer-port-random-on-start”: false,
“peer-socket-tos”: “default”,
“pex-enabled”: true,
“port-forwarding-enabled”: true,
“preallocation”: 1,
“prefetch-enabled”: false,
“queue-stalled-enabled”: true,
“queue-stalled-minutes”: 30,
“ratio-limit”: 2,
“ratio-limit-enabled”: false,
“rename-partial-files”: true,
“rpc-authentication-required”: false,
“rpc-bind-address”: “0.0.0.0”,
“rpc-enabled”: true,
“rpc-password”: “{690c15d5f461b7253b45edfc4b37290810deea02AKh8RLYR”,
“rpc-port”: 9091,
“rpc-url”: “/transmission/”,
“rpc-username”: “”,
“rpc-whitelist”: “”,
“rpc-whitelist-enabled”: false,
“scrape-paused-torrents-enabled”: true,
“script-torrent-done-enabled”: false,
“script-torrent-done-filename”: “”,
“seed-queue-enabled”: false,
“seed-queue-size”: 10,
“speed-limit-down”: 100,
“speed-limit-down-enabled”: false,
“speed-limit-up”: 100,
“speed-limit-up-enabled”: false,
“start-added-torrents”: true,
“trash-original-torrent-files”: false,
“umask”: 0,
“upload-slots-per-torrent”: 14,
“utp-enabled”: true,
“watch-dir”: “/shares/Public/Transmission/Downloads”,
“watch-dir-enabled”: true
}
WDMyCloud:~#
Thank you
Reinstalled after firmware update but getting an error of “download directory path is not absolute” when using the Chrome plugin to add torrents. Was working fine beforehand?
Here’s the line from my settings.json…
“download-dir”: “/DataVolume/shares/Craig/Downloads”,
I’m a bit of a noob with this in truth so, what have I done wrong?
Thank you for support.
Now my cloud fw is 4.0.xxx with this app already,So I need to update new fw then install this app again.
Could you plz let me know how to do it?
Hi @Nazar78,
I can’t access to WDMyCloud | TeaNazaR.com
Is there any problem?
Regards
Solved. It was a DNS problem
Why is there a ten second and then a five second time limit to type yes when installing? I would like to read what is being said on the screen before I type yes to anything. Can you extend these time limits?
Cheers
That’s how the installer works. If you want to read, just let it timeout.
I’ve two questions after I restore MC to factory setting (restored only system parameters).
How to get back trasmission; have I to start from the beginning?
Can i install trasmission while MC is working to make a new safepoint?
Tnx.
mau----
I installed CloudDAVMod v1.0 and Trasmission on my WD Mycloud
Can I remotely access Trasmission?
Thank you!
Yes you have to repeat every steps after firmware upgrade or factory reset.
And yes you can install while MC is working on the safepoint.
Of course you can, with the correct port-forwarding from port 9091 of your router to the MyCloud.
My 9091 port is correct port forwarding. How I remotely access transmission? What web add? Sorry for my bad English.
Thank you!
The public IP address of your router, that is.
1 Like
Hi Nazar78!
What about Transmission App on new devices with firmware 2+ (probably Clouds 2-nd gen)
Currently firmware is 2.21.126
If I will install App form your guide will it bricks my Cloud?
I don’t have the 2nd gen devices to support. Search this forum for 2nd gen alternatives.
hi Nazar89,
thank you for your work.
my device is a new-bought My Cloud with firmware 2.21.xx.
in the install step, I had the following problem:
do you know how to fix the problem?
Hi there again. This app has been working perfectly on my cloud, just wanted to know if you have or any of you have added a script for the auto-removal of torrents after download/completed. I had found several instructions but i don’t know if it suits this mod version and compatible for the cloud. I am also using sickrage with it so the torrent list on transmission become crowded at some point in time. Thanks everyone!
hey jason, as nazaar said, the app perfectly supports 4.x version of mycloud and not the ver 2.x. You’ll have to search for the 2nd gen version of the cloud in other thread.
