[ 0.000000] Booting Linux on physical CPU 0 [ 0.000000] Linux version 3.2.26 (root@steveh-ubuntu) (gcc version 4.7.3 20130102 (prerelease) (crosstool-NG linaro-1.13.1+bzr - Linaro GCC 2013.01) ) #1 SMP Thu Jul 9 11:14:15 PDT 2015 wd-2.4-rel [ 0.000000] CPU: ARMv7 Processor [412fc091] revision 1 (ARMv7), cr=10c53c7d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache [ 0.000000] Machine: Comcerto 2000 EVM [ 0.000000] Memory policy: ECC disabled, Data cache writealloc [ 0.000000] Comcerto: zone_dma mapping size=2c00000 type=10 [ 0.000000] On node 0 totalpages: 3776 [ 0.000000] free_area_init_node: node 0, pgdat c47cc4c0, node_mem_map c4850000 [ 0.000000] DMA zone: 1 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 703 pages, LIFO batch:0 [ 0.000000] Normal zone: 2 pages used for memmap [ 0.000000] Normal zone: 3070 pages, LIFO batch:0 [ 0.000000] PERCPU: Embedded 2 pages/cpu @c48a0000 s71488 r8192 d51392 u131072 [ 0.000000] pcpu-alloc: s71488 r8192 d51392 u131072 alloc=2*65536 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping off. Total pages: 3773 [ 0.000000] Kernel command line: console=ttyS0,115200n8, init=/sbin/init root=/dev/md1 raid=autodetect rootfstype=ext3 rw noinitrd debug initcall_debug swapaccount=1 panic=3 mac_addr=00:90:A9:D7:A6:65 model=sq serial= board_test= btn_status=0 [ 0.000000] PID hash table entries: 1024 (order: -4, 4096 bytes) [ 0.000000] Dentry cache hash table entries: 32768 (order: 1, 131072 bytes) [ 0.000000] Inode-cache hash table entries: 16384 (order: 0, 65536 bytes) [ 0.000000] Memory: 44MB 192MB = 236MB total [ 0.000000] Memory: 232000k/232000k available, 30144k reserved, 0K highmem [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0x00000000 ( 64 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] vmalloc : 0xd0800000 - 0xf0000000 ( 504 MB) [ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB) [ 0.000000] modules : 0xc3000000 - 0xc4000000 ( 16 MB) [ 0.000000] .text : 0xc4008000 - 0xc471338c (7213 kB) [ 0.000000] .init : 0xc4720000 - 0xc4771740 ( 326 kB) [ 0.000000] .data : 0xc4780000 - 0xc47cf688 ( 318 kB) [ 0.000000] .bss : 0xc47cf6ac - 0xc484eb6c ( 510 kB) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:256 [ 0.000000] PLL0 running at 1300 MHz, PLL1 at 800 MHz PLL2 running at 500 MHz PLL3 running at 1066 MHz [ 0.000000] sched_clock: 32 bits at 200MHz, resolution 5ns, wraps every 21474ms [ 0.000270] Calibrating delay loop... 1292.69 BogoMIPS (lpj=6463488) [ 0.040045] pid_max: default: 32768 minimum: 301 [ 0.040414] Mount-cache hash table entries: 8192 [ 0.042020] CPU: Testing write buffer coherency: ok [ 0.042412] CPU0: thread -1, cpu 0, socket 9, mpidr 80000900 [ 0.042457] Calibrating local timer... 162.37MHz. [ 0.100095] Creating cpu1_hotplug_thread.... [ 0.100226] cpu1_hotplug_thread Created [ 0.100268] calling init_hw_perf_events+0x0/0x250 @ 1 [ 0.100285] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available [ 0.100346] initcall init_hw_perf_events+0x0/0x250 returned 0 after 0 usecs [ 0.100372] calling migration_init+0x0/0x74 @ 1 [ 0.100398] initcall migration_init+0x0/0x74 returned 0 after 0 usecs [ 0.100417] calling spawn_ksoftirqd+0x0/0x54 @ 1 [ 0.100552] initcall spawn_ksoftirqd+0x0/0x54 returned 0 after 0 usecs [ 0.100579] calling init_workqueues+0x0/0x3a4 @ 1 [ 0.100921] initcall init_workqueues+0x0/0x3a4 returned 0 after 0 usecs [ 0.100952] calling cpu_stop_init+0x0/0xc8 @ 1 [ 0.101092] initcall cpu_stop_init+0x0/0xc8 returned 0 after 0 usecs [ 0.101119] calling rcu_scheduler_really_started+0x0/0x18 @ 1 [ 0.101139] initcall rcu_scheduler_really_started+0x0/0x18 returned 0 after 0 usecs [ 0.101156] calling relay_init+0x0/0x18 @ 1 [ 0.101175] initcall relay_init+0x0/0x18 returned 0 after 0 usecs [ 0.101193] calling tracer_alloc_buffers+0x0/0x180 @ 1 [ 0.101456] initcall tracer_alloc_buffers+0x0/0x180 returned 0 after 0 usecs [ 0.101480] calling init_trace_printk+0x0/0xc @ 1 [ 0.101499] initcall init_trace_printk+0x0/0xc returned 0 after 0 usecs [ 0.102761] CPU1: Booted secondary processor [ 0.140028] CPU1: thread -1, cpu 1, socket 9, mpidr 80000901 [ 0.140106] Brought up 2 CPUs [ 0.140127] SMP: Total of 2 processors activated (2585.39 BogoMIPS). [ 0.142432] calling ipc_ns_init+0x0/0x18 @ 1 [ 0.142460] initcall ipc_ns_init+0x0/0x18 returned 0 after 0 usecs [ 0.142482] calling init_mmap_min_addr+0x0/0x20 @ 1 [ 0.142503] initcall init_mmap_min_addr+0x0/0x20 returned 0 after 0 usecs [ 0.142526] calling c2k_init_gpio+0x0/0x2c @ 1 [ 0.142552] initcall c2k_init_gpio+0x0/0x2c returned 0 after 0 usecs [ 0.142578] calling init_cpufreq_transition_notifier_list+0x0/0x24 @ 1 [ 0.142624] initcall init_cpufreq_transition_notifier_list+0x0/0x24 returned 0 after 0 usecs [ 0.142645] calling net_ns_init+0x0/0x1b4 @ 1 [ 0.142667] initcall net_ns_init+0x0/0x1b4 returned 0 after 0 usecs [ 0.142687] calling ptrace_break_init+0x0/0x2c @ 1 [ 0.142703] initcall ptrace_break_init+0x0/0x2c returned 0 after 0 usecs [ 0.142720] calling cpu_suspend_init+0x0/0x50 @ 1 [ 0.142807] initcall cpu_suspend_init+0x0/0x50 returned 0 after 0 usecs [ 0.142826] calling consistent_init+0x0/0x11c @ 1 [ 0.142845] initcall consistent_init+0x0/0x11c returned 0 after 0 usecs [ 0.142864] calling v6_userpage_init+0x0/0x8 @ 1 [ 0.142880] initcall v6_userpage_init+0x0/0x8 returned 0 after 0 usecs [ 0.142909] calling cpu_hotplug_pm_sync_init+0x0/0x18 @ 1 [ 0.142927] initcall cpu_hotplug_pm_sync_init+0x0/0x18 returned 0 after 0 usecs [ 0.142943] calling alloc_frozen_cpus+0x0/0x8 @ 1 [ 0.142958] initcall alloc_frozen_cpus+0x0/0x8 returned 0 after 0 usecs [ 0.142976] calling sysctl_init+0x0/0x3c @ 1 [ 0.143139] initcall sysctl_init+0x0/0x3c returned 0 after 0 usecs [ 0.143159] calling ksysfs_init+0x0/0xa0 @ 1 [ 0.143282] initcall ksysfs_init+0x0/0xa0 returned 0 after 0 usecs [ 0.143305] calling init_jiffies_clocksource+0x0/0xc @ 1 [ 0.143327] initcall init_jiffies_clocksource+0x0/0xc returned 0 after 0 usecs [ 0.143346] calling pm_init+0x0/0x40 @ 1 [ 0.143393] initcall pm_init+0x0/0x40 returned 0 after 0 usecs [ 0.143425] calling cpu_pm_init+0x0/0x18 @ 1 [ 0.143443] initcall cpu_pm_init+0x0/0x18 returned 0 after 0 usecs [ 0.143460] calling init_zero_pfn+0x0/0x40 @ 1 [ 0.143474] initcall init_zero_pfn+0x0/0x40 returned 0 after 0 usecs [ 0.143496] calling fsnotify_init+0x0/0x24 @ 1 [ 0.143534] initcall fsnotify_init+0x0/0x24 returned 0 after 0 usecs [ 0.143550] calling filelock_init+0x0/0x40 @ 1 [ 0.143627] initcall filelock_init+0x0/0x40 returned 0 after 0 usecs [ 0.143648] calling init_script_binfmt+0x0/0x10 @ 1 [ 0.143665] initcall init_script_binfmt+0x0/0x10 returned 0 after 0 usecs [ 0.143682] calling init_elf_binfmt+0x0/0x10 @ 1 [ 0.143698] initcall init_elf_binfmt+0x0/0x10 returned 0 after 0 usecs [ 0.143719] calling debugfs_init+0x0/0x64 @ 1 [ 0.143760] initcall debugfs_init+0x0/0x64 returned 0 after 0 usecs [ 0.143781] calling random32_init+0x0/0xdc @ 1 [ 0.143800] initcall random32_init+0x0/0xdc returned 0 after 0 usecs [ 0.143820] calling cpufreq_core_init+0x0/0xc0 @ 1 [ 0.143854] initcall cpufreq_core_init+0x0/0xc0 returned 0 after 0 usecs [ 0.143873] calling sock_init+0x0/0x94 @ 1 [ 0.144283] initcall sock_init+0x0/0x94 returned 0 after 0 usecs [ 0.144309] calling netlink_proto_init+0x0/0x1b8 @ 1 [ 0.144352] NET: Registered protocol family 16 [ 0.144412] initcall netlink_proto_init+0x0/0x1b8 returned 0 after 0 usecs [ 0.144450] calling bdi_class_init+0x0/0x58 @ 1 [ 0.145029] initcall bdi_class_init+0x0/0x58 returned 0 after 0 usecs [ 0.145072] calling kobject_uevent_init+0x0/0x20 @ 1 [ 0.145114] initcall kobject_uevent_init+0x0/0x20 returned 0 after 0 usecs [ 0.145137] calling gpiolib_sysfs_init+0x0/0x164 @ 1 [ 0.145794] initcall gpiolib_sysfs_init+0x0/0x164 returned 0 after 0 usecs [ 0.145824] calling pcibus_class_init+0x0/0x14 @ 1 [ 0.146117] initcall pcibus_class_init+0x0/0x14 returned 0 after 0 usecs [ 0.146141] calling pci_driver_init+0x0/0xc @ 1 [ 0.146461] initcall pci_driver_init+0x0/0xc returned 0 after 0 usecs [ 0.146488] calling tty_class_init+0x0/0x44 @ 1 [ 0.146760] initcall tty_class_init+0x0/0x44 returned 0 after 0 usecs [ 0.146789] calling wakeup_sources_debugfs_init+0x0/0x44 @ 1 [ 0.146837] initcall wakeup_sources_debugfs_init+0x0/0x44 returned 0 after 0 usecs [ 0.146861] calling spi_init+0x0/0x8c @ 1 [ 0.147395] initcall spi_init+0x0/0x8c returned 0 after 0 usecs [ 0.147424] calling customize_machine+0x0/0x28 @ 1 [ 0.147475] L310 cache controller enabled [ 0.147491] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x00c40000, PREFETCH_CTRL 0x00000000, Cache size: 262144 B [ 0.147635] ARMv7 AUX CTRL(0): 0x47 [ 0.147644] ARMv7 AUX CTRL(0): 0x47 [ 0.147669] ARMv7 AUX CTRL(1): 0x47 [ 0.147682] ARMv7 AUX CTRL(1): 0x47 [ 0.150000] initcall customize_machine+0x0/0x28 returned 0 after 0 usecs [ 0.150063] calling arch_hw_breakpoint_init+0x0/0x280 @ 1 [ 0.150089] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. [ 0.150103] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.150124] initcall arch_hw_breakpoint_init+0x0/0x280 returned 0 after 0 usecs [ 0.150142] calling cpu_pmu_reset+0x0/0x34 @ 1 [ 0.150165] initcall cpu_pmu_reset+0x0/0x34 returned 0 after 0 usecs [ 0.150181] calling exceptions_init+0x0/0x98 @ 1 [ 0.150196] initcall exceptions_init+0x0/0x98 returned 0 after 0 usecs [ 0.150211] calling dma_bus_init+0x0/0x14 @ 1 [ 0.150384] initcall dma_bus_init+0x0/0x14 returned 0 after 0 usecs [ 0.150402] calling dma_channel_table_init+0x0/0x10c @ 1 [ 0.150517] initcall dma_channel_table_init+0x0/0x10c returned 0 after 0 usecs [ 0.150533] calling topology_init+0x0/0x70 @ 1 [ 0.150842] initcall topology_init+0x0/0x70 returned 0 after 0 usecs [ 0.150867] calling comcerto_pcie_init+0x0/0x180 @ 1 [ 0.150909] PCIe: Ref clk 24Mhz [ 0.150918] PCIe: Detected C2K RevA1 device serdes clk devider old:new=2e:6 [ 4.146889] PCIe0: Link Up Failed [ 4.147317] initcall comcerto_pcie_init+0x0/0x180 returned 0 after 3906250 usecs [ 4.147341] calling param_sysfs_init+0x0/0x1a8 @ 1 [ 4.187362] initcall param_sysfs_init+0x0/0x1a8 returned 0 after 39062 usecs [ 4.187384] calling default_bdi_init+0x0/0xb0 @ 1 [ 4.187886] initcall default_bdi_init+0x0/0xb0 returned 0 after 0 usecs [ 4.187913] calling init_bio+0x0/0xf8 @ 1 [ 4.188043] bio: create slab at 0 [ 4.188083] initcall init_bio+0x0/0xf8 returned 0 after 0 usecs [ 4.188102] calling fsnotify_notification_init+0x0/0x9c @ 1 [ 4.188171] initcall fsnotify_notification_init+0x0/0x9c returned 0 after 0 usecs [ 4.188199] calling cryptomgr_init+0x0/0xc @ 1 [ 4.188216] initcall cryptomgr_init+0x0/0xc returned 0 after 0 usecs [ 4.188233] calling blk_settings_init+0x0/0x34 @ 1 [ 4.188249] initcall blk_settings_init+0x0/0x34 returned 0 after 0 usecs [ 4.188264] calling blk_ioc_init+0x0/0x40 @ 1 [ 4.188302] initcall blk_ioc_init+0x0/0x40 returned 0 after 0 usecs [ 4.188318] calling blk_softirq_init+0x0/0x80 @ 1 [ 4.188338] initcall blk_softirq_init+0x0/0x80 returned 0 after 0 usecs [ 4.188354] calling blk_iopoll_setup+0x0/0x80 @ 1 [ 4.188369] initcall blk_iopoll_setup+0x0/0x80 returned 0 after 0 usecs [ 4.188385] calling genhd_device_init+0x0/0x80 @ 1 [ 4.188758] initcall genhd_device_init+0x0/0x80 returned 0 after 0 usecs [ 4.188782] calling gpiolib_debugfs_init+0x0/0x38 @ 1 [ 4.188816] initcall gpiolib_debugfs_init+0x0/0x38 returned 0 after 0 usecs [ 4.188845] calling pci_slot_init+0x0/0x54 @ 1 [ 4.188874] initcall pci_slot_init+0x0/0x54 returned 0 after 0 usecs [ 4.188894] calling misc_init+0x0/0xc8 @ 1 [ 4.189093] initcall misc_init+0x0/0xc8 returned 0 after 0 usecs [ 4.189112] calling vga_arb_device_init+0x0/0xdc @ 1 [ 4.189319] vgaarb: loaded [ 4.189340] initcall vga_arb_device_init+0x0/0xdc returned 0 after 0 usecs [ 4.189359] calling init_scsi+0x0/0x88 @ 1 [ 4.190169] SCSI subsystem initialized [ 4.190196] initcall init_scsi+0x0/0x88 returned 0 after 0 usecs [ 4.190214] calling ata_init+0x0/0x334 @ 1 [ 4.190731] libata version 3.00 loaded. [ 4.190757] initcall ata_init+0x0/0x334 returned 0 after 0 usecs [ 4.190777] calling phy_init+0x0/0x30 @ 1 [ 4.191235] initcall phy_init+0x0/0x30 returned 0 after 0 usecs [ 4.191254] calling usb_init+0x0/0x178 @ 1 [ 4.191634] usbcore: registered new interface driver usbfs [ 4.191976] usbcore: registered new interface driver hub [ 4.192214] usbcore: registered new device driver usb [ 4.192243] initcall usb_init+0x0/0x178 returned 0 after 0 usecs [ 4.192260] calling serio_init+0x0/0x30 @ 1 [ 4.192439] initcall serio_init+0x0/0x30 returned 0 after 0 usecs [ 4.192458] calling input_init+0x0/0x124 @ 1 [ 4.192636] initcall input_init+0x0/0x124 returned 0 after 0 usecs [ 4.192655] calling rtc_init+0x0/0x74 @ 1 [ 4.192819] initcall rtc_init+0x0/0x74 returned 0 after 0 usecs [ 4.192839] calling hwmon_init+0x0/0x48 @ 1 [ 4.192999] initcall hwmon_init+0x0/0x48 returned 0 after 0 usecs [ 4.193017] calling md_init+0x0/0x158 @ 1 [ 4.193189] initcall md_init+0x0/0x158 returned 0 after 0 usecs [ 4.193208] calling leds_init+0x0/0x5c @ 1 [ 4.193377] initcall leds_init+0x0/0x5c returned 0 after 0 usecs [ 4.193396] calling proto_init+0x0/0xc @ 1 [ 4.193423] initcall proto_init+0x0/0xc returned 0 after 0 usecs [ 4.193440] calling net_dev_init+0x0/0x1d4 @ 1 [ 4.194329] initcall net_dev_init+0x0/0x1d4 returned 0 after 0 usecs [ 4.194350] calling neigh_init+0x0/0xa4 @ 1 [ 4.194366] initcall neigh_init+0x0/0xa4 returned 0 after 0 usecs [ 4.194382] calling fib_rules_init+0x0/0xc8 @ 1 [ 4.194400] initcall fib_rules_init+0x0/0xc8 returned 0 after 0 usecs [ 4.194416] calling pktsched_init+0x0/0x10c @ 1 [ 4.194445] initcall pktsched_init+0x0/0x10c returned 0 after 0 usecs [ 4.194461] calling genl_init+0x0/0x90 @ 1 [ 4.194507] initcall genl_init+0x0/0x90 returned 0 after 0 usecs [ 4.194533] calling rfkill_init+0x0/0x88 @ 1 [ 4.194915] initcall rfkill_init+0x0/0x88 returned 0 after 0 usecs [ 4.194935] calling sysctl_init+0x0/0x4c @ 1 [ 4.194952] initcall sysctl_init+0x0/0x4c returned 0 after 0 usecs [ 4.194971] calling proc_cpu_init+0x0/0x24 @ 1 [ 4.194996] initcall proc_cpu_init+0x0/0x24 returned 0 after 0 usecs [ 4.195014] calling dma_debug_do_init+0x0/0x8 @ 1 [ 4.195029] initcall dma_debug_do_init+0x0/0x8 returned 0 after 0 usecs [ 4.195046] calling alignment_init+0x0/0x120 @ 1 [ 4.195068] initcall alignment_init+0x0/0x120 returned 0 after 0 usecs [ 4.195090] calling clocksource_done_booting+0x0/0x104 @ 1 [ 4.195101] Switching to clocksource timer2 [ 4.195161] initcall clocksource_done_booting+0x0/0x104 returned 0 after 11 usecs [ 4.195185] calling rb_init_debugfs+0x0/0x40 @ 1 [ 4.195231] initcall rb_init_debugfs+0x0/0x40 returned 0 after 26 usecs [ 4.195250] calling tracer_init_debugfs+0x0/0x390 @ 1 [ 4.195550] initcall tracer_init_debugfs+0x0/0x390 returned 0 after 268 usecs [ 4.195572] calling init_trace_printk_function_export+0x0/0x40 @ 1 [ 4.195600] initcall init_trace_printk_function_export+0x0/0x40 returned 0 after 8 usecs [ 4.195618] calling event_trace_init+0x0/0x368 @ 1 [ 4.208557] initcall event_trace_init+0x0/0x368 returned 0 after 12601 usecs [ 4.208587] calling init_pipe_fs+0x0/0x50 @ 1 [ 4.208680] initcall init_pipe_fs+0x0/0x50 returned 0 after 71 usecs [ 4.208698] calling eventpoll_init+0x0/0xc0 @ 1 [ 4.208809] initcall eventpoll_init+0x0/0xc0 returned 0 after 89 usecs [ 4.208827] calling anon_inode_init+0x0/0x12c @ 1 [ 4.208895] initcall anon_inode_init+0x0/0x12c returned 0 after 47 usecs [ 4.208914] calling fscache_init+0x0/0x244 @ 1 [ 4.209013] FS-Cache: Loaded [ 4.209034] initcall fscache_init+0x0/0x244 returned 0 after 98 usecs [ 4.209056] calling cachefiles_init+0x0/0xa0 @ 1 [ 4.209439] CacheFiles: Loaded [ 4.209478] initcall cachefiles_init+0x0/0xa0 returned 0 after 376 usecs [ 4.209503] calling blk_scsi_ioctl_init+0x0/0xe0 @ 1 [ 4.209521] initcall blk_scsi_ioctl_init+0x0/0xe0 returned 0 after 1 usecs [ 4.209540] calling chr_dev_init+0x0/0xd8 @ 1 [ 4.211785] initcall chr_dev_init+0x0/0xd8 returned 0 after 2165 usecs [ 4.211808] calling firmware_class_init+0x0/0x14 @ 1 [ 4.211980] initcall firmware_class_init+0x0/0x14 returned 0 after 142 usecs [ 4.212005] calling cpufreq_gov_performance_init+0x0/0xc @ 1 [ 4.212024] initcall cpufreq_gov_performance_init+0x0/0xc returned 0 after 1 usecs [ 4.212040] calling cpufreq_gov_userspace_init+0x0/0xc @ 1 [ 4.212056] initcall cpufreq_gov_userspace_init+0x0/0xc returned 0 after 1 usecs [ 4.212072] calling ssb_modinit+0x0/0x5c @ 1 [ 4.212267] initcall ssb_modinit+0x0/0x5c returned 0 after 168 usecs [ 4.212286] calling sysctl_core_init+0x0/0x38 @ 1 [ 4.212365] initcall sysctl_core_init+0x0/0x38 returned 0 after 57 usecs [ 4.212381] calling inet_init+0x0/0x278 @ 1 [ 4.212546] NET: Registered protocol family 2 [ 4.212900] IP route cache hash table entries: 16384 (order: 0, 65536 bytes) [ 4.213929] TCP established hash table entries: 8192 (order: 0, 65536 bytes) [ 4.214090] TCP bind hash table entries: 8192 (order: 0, 65536 bytes) [ 4.214267] TCP: Hash tables configured (established 8192 bind 8192) [ 4.214278] TCP reno registered [ 4.214291] UDP hash table entries: 2048 (order: 0, 65536 bytes) [ 4.214589] UDP-Lite hash table entries: 2048 (order: 0, 65536 bytes) [ 4.215325] initcall inet_init+0x0/0x278 returned 0 after 2850 usecs [ 4.215350] calling af_unix_init+0x0/0x54 @ 1 [ 4.215411] NET: Registered protocol family 1 [ 4.215472] initcall af_unix_init+0x0/0x54 returned 0 after 98 usecs [ 4.215494] calling init_sunrpc+0x0/0x70 @ 1 [ 4.215922] RPC: Registered named UNIX socket transport module. [ 4.215935] RPC: Registered udp transport module. [ 4.215944] RPC: Registered tcp transport module. [ 4.215953] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 4.215982] initcall init_sunrpc+0x0/0x70 returned 0 after 450 usecs [ 4.216001] calling pci_apply_final_quirks+0x0/0x110 @ 1 [ 4.216015] PCI: CLS 0 bytes, default 32 [ 4.216030] initcall pci_apply_final_quirks+0x0/0x110 returned 0 after 12 usecs [ 4.216048] calling default_rootfs+0x0/0x6c @ 1 [ 4.216127] initcall default_rootfs+0x0/0x6c returned 0 after 59 usecs [ 4.216147] calling timer_init_syscore_ops+0x0/0x18 @ 1 [ 4.216163] initcall timer_init_syscore_ops+0x0/0x18 returned 0 after 1 usecs [ 4.216181] calling register_pmu_driver+0x0/0xc @ 1 [ 4.216536] initcall register_pmu_driver+0x0/0xc returned 0 after 320 usecs [ 4.216562] calling membuf_init+0x0/0xbc @ 1 [ 4.216580] membuf_init: created membuf device(253, 0) [ 4.216596] initcall membuf_init+0x0/0xbc returned 0 after 18 usecs [ 4.216622] calling comcerto_tdm_init+0x0/0xc @ 1 [ 4.216698] clock_frequency_set: (1:24) NTG INCR value is 422212465 [ 4.216940] initcall comcerto_tdm_init+0x0/0xc returned 0 after 285 usecs [ 4.216970] calling proc_execdomains_init+0x0/0x38 @ 1 [ 4.217002] initcall proc_execdomains_init+0x0/0x38 returned 0 after 12 usecs [ 4.217019] calling ioresources_init+0x0/0x58 @ 1 [ 4.217046] initcall ioresources_init+0x0/0x58 returned 0 after 9 usecs [ 4.217062] calling uid_cache_init+0x0/0xb0 @ 1 [ 4.217151] initcall uid_cache_init+0x0/0xb0 returned 0 after 64 usecs [ 4.217172] calling init_posix_timers+0x0/0x1d8 @ 1 [ 4.217227] initcall init_posix_timers+0x0/0x1d8 returned 0 after 32 usecs [ 4.217247] calling init_posix_cpu_timers+0x0/0xe4 @ 1 [ 4.217265] initcall init_posix_cpu_timers+0x0/0xe4 returned 0 after 1 usecs [ 4.217301] calling create_proc_profile+0x0/0x24c @ 1 [ 4.217319] initcall create_proc_profile+0x0/0x24c returned 0 after 0 usecs [ 4.217343] calling timekeeping_init_ops+0x0/0x18 @ 1 [ 4.217362] initcall timekeeping_init_ops+0x0/0x18 returned 0 after 1 usecs [ 4.217378] calling init_clocksource_sysfs+0x0/0x50 @ 1 [ 4.217738] initcall init_clocksource_sysfs+0x0/0x50 returned 0 after 318 usecs [ 4.217761] calling init_timer_list_procfs+0x0/0x3c @ 1 [ 4.217793] initcall init_timer_list_procfs+0x0/0x3c returned 0 after 10 usecs [ 4.217811] calling alarmtimer_init+0x0/0x19c @ 1 [ 4.218237] initcall alarmtimer_init+0x0/0x19c returned 0 after 381 usecs [ 4.218259] calling futex_init+0x0/0xc8 @ 1 [ 4.218283] initcall futex_init+0x0/0xc8 returned 0 after 7 usecs [ 4.218300] calling proc_modules_init+0x0/0x38 @ 1 [ 4.218332] initcall proc_modules_init+0x0/0x38 returned 0 after 13 usecs [ 4.218348] calling kallsyms_init+0x0/0x38 @ 1 [ 4.218368] initcall kallsyms_init+0x0/0x38 returned 0 after 5 usecs [ 4.218385] calling user_namespaces_init+0x0/0x40 @ 1 [ 4.218480] initcall user_namespaces_init+0x0/0x40 returned 0 after 67 usecs [ 4.218500] calling pid_namespaces_init+0x0/0x40 @ 1 [ 4.218553] initcall pid_namespaces_init+0x0/0x40 returned 0 after 31 usecs [ 4.218572] calling irq_pm_init_ops+0x0/0x18 @ 1 [ 4.218588] initcall irq_pm_init_ops+0x0/0x18 returned 0 after 1 usecs [ 4.218605] calling utsname_sysctl_init+0x0/0x18 @ 1 [ 4.218701] initcall utsname_sysctl_init+0x0/0x18 returned 0 after 73 usecs [ 4.218736] calling init_tracepoints+0x0/0xc @ 1 [ 4.218752] initcall init_tracepoints+0x0/0xc returned 0 after 1 usecs [ 4.218770] calling init_events+0x0/0x68 @ 1 [ 4.218796] initcall init_events+0x0/0x68 returned 0 after 11 usecs [ 4.218812] calling init_blk_tracer+0x0/0x5c @ 1 [ 4.218831] initcall init_blk_tracer+0x0/0x5c returned 0 after 3 usecs [ 4.218848] calling perf_event_sysfs_init+0x0/0x128 @ 1 [ 4.219748] initcall perf_event_sysfs_init+0x0/0x128 returned 0 after 837 usecs [ 4.219781] calling init_per_zone_wmark_min+0x0/0x90 @ 1 [ 4.220009] initcall init_per_zone_wmark_min+0x0/0x90 returned 0 after 188 usecs [ 4.220045] calling kswapd_init+0x0/0x24 @ 1 [ 4.220234] initcall kswapd_init+0x0/0x24 returned 0 after 152 usecs [ 4.220256] calling setup_vmstat+0x0/0xe4 @ 1 [ 4.220315] initcall setup_vmstat+0x0/0xe4 returned 0 after 35 usecs [ 4.220331] calling mm_sysfs_init+0x0/0x3c @ 1 [ 4.220363] initcall mm_sysfs_init+0x0/0x3c returned 0 after 17 usecs [ 4.220381] calling proc_vmalloc_init+0x0/0x38 @ 1 [ 4.220403] initcall proc_vmalloc_init+0x0/0x38 returned 0 after 7 usecs [ 4.220422] calling memblock_init_debugfs+0x0/0x7c @ 1 [ 4.220472] initcall memblock_init_debugfs+0x0/0x7c returned 0 after 28 usecs [ 4.220489] calling procswaps_init+0x0/0x38 @ 1 [ 4.220511] initcall procswaps_init+0x0/0x38 returned 0 after 7 usecs [ 4.220526] calling slab_proc_init+0x0/0x38 @ 1 [ 4.220546] initcall slab_proc_init+0x0/0x38 returned 0 after 5 usecs [ 4.220560] calling cpucache_init+0x0/0x4c @ 1 [ 4.220577] initcall cpucache_init+0x0/0x4c returned 0 after 3 usecs [ 4.220592] calling fcntl_init+0x0/0x40 @ 1 [ 4.220679] initcall fcntl_init+0x0/0x40 returned 0 after 66 usecs [ 4.220696] calling proc_filesystems_init+0x0/0x38 @ 1 [ 4.220721] initcall proc_filesystems_init+0x0/0x38 returned 0 after 8 usecs [ 4.220735] calling dio_init+0x0/0x40 @ 1 [ 4.220783] initcall dio_init+0x0/0x40 returned 0 after 30 usecs [ 4.220798] calling fsnotify_mark_init+0x0/0x40 @ 1 [ 4.220898] initcall fsnotify_mark_init+0x0/0x40 returned 0 after 76 usecs [ 4.220918] calling inotify_user_setup+0x0/0x74 @ 1 [ 4.221000] initcall inotify_user_setup+0x0/0x74 returned 0 after 61 usecs [ 4.221016] calling aio_setup+0x0/0x8c @ 1 [ 4.221102] initcall aio_setup+0x0/0x8c returned 0 after 64 usecs [ 4.221120] calling proc_locks_init+0x0/0x38 @ 1 [ 4.221149] initcall proc_locks_init+0x0/0x38 returned 0 after 12 usecs [ 4.221165] calling init_mbcache+0x0/0x18 @ 1 [ 4.221181] initcall init_mbcache+0x0/0x18 returned 0 after 1 usecs [ 4.221196] calling proc_cmdline_init+0x0/0x38 @ 1 [ 4.221217] initcall proc_cmdline_init+0x0/0x38 returned 0 after 6 usecs [ 4.221231] calling proc_consoles_init+0x0/0x38 @ 1 [ 4.221251] initcall proc_consoles_init+0x0/0x38 returned 0 after 5 usecs [ 4.221266] calling proc_cpuinfo_init+0x0/0x38 @ 1 [ 4.221285] initcall proc_cpuinfo_init+0x0/0x38 returned 0 after 5 usecs [ 4.221300] calling proc_devices_init+0x0/0x38 @ 1 [ 4.221318] initcall proc_devices_init+0x0/0x38 returned 0 after 4 usecs [ 4.221333] calling proc_interrupts_init+0x0/0x38 @ 1 [ 4.221352] initcall proc_interrupts_init+0x0/0x38 returned 0 after 5 usecs [ 4.221367] calling proc_loadavg_init+0x0/0x38 @ 1 [ 4.221386] initcall proc_loadavg_init+0x0/0x38 returned 0 after 4 usecs [ 4.221400] calling proc_meminfo_init+0x0/0x38 @ 1 [ 4.221418] initcall proc_meminfo_init+0x0/0x38 returned 0 after 4 usecs [ 4.221433] calling proc_stat_init+0x0/0x38 @ 1 [ 4.221451] initcall proc_stat_init+0x0/0x38 returned 0 after 4 usecs [ 4.221465] calling proc_uptime_init+0x0/0x38 @ 1 [ 4.221484] initcall proc_uptime_init+0x0/0x38 returned 0 after 4 usecs [ 4.221498] calling proc_version_init+0x0/0x38 @ 1 [ 4.221516] initcall proc_version_init+0x0/0x38 returned 0 after 4 usecs [ 4.221532] calling proc_softirqs_init+0x0/0x38 @ 1 [ 4.221552] initcall proc_softirqs_init+0x0/0x38 returned 0 after 5 usecs [ 4.221567] calling proc_kmsg_init+0x0/0x38 @ 1 [ 4.221586] initcall proc_kmsg_init+0x0/0x38 returned 0 after 4 usecs [ 4.221600] calling proc_page_init+0x0/0x58 @ 1 [ 4.221623] initcall proc_page_init+0x0/0x58 returned 0 after 9 usecs [ 4.221638] calling init_devpts_fs+0x0/0x50 @ 1 [ 4.221719] initcall init_devpts_fs+0x0/0x50 returned 0 after 59 usecs [ 4.221735] calling init_ext3_fs+0x0/0x88 @ 1 [ 4.221838] initcall init_ext3_fs+0x0/0x88 returned 0 after 80 usecs [ 4.221854] calling init_ext2_fs+0x0/0x88 @ 1 [ 4.221923] initcall init_ext2_fs+0x0/0x88 returned 0 after 48 usecs [ 4.221939] calling ext4_init_fs+0x0/0x200 @ 1 [ 4.222176] initcall ext4_init_fs+0x0/0x200 returned 0 after 209 usecs [ 4.222195] calling journal_init+0x0/0xcc @ 1 [ 4.222293] initcall journal_init+0x0/0xcc returned 0 after 77 usecs [ 4.222309] calling journal_init+0x0/0x114 @ 1 [ 4.222432] initcall journal_init+0x0/0x114 returned 0 after 102 usecs [ 4.222449] calling init_ramfs_fs+0x0/0xc @ 1 [ 4.222470] initcall init_ramfs_fs+0x0/0xc returned 0 after 5 usecs [ 4.222485] calling init_nfs_fs+0x0/0x144 @ 1 [ 4.223296] initcall init_nfs_fs+0x0/0x144 returned 0 after 757 usecs [ 4.223318] calling init_nfsd+0x0/0xd0 @ 1 [ 4.223326] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 4.223662] initcall init_nfsd+0x0/0xd0 returned 0 after 308 usecs [ 4.223680] calling init_nlm+0x0/0x30 @ 1 [ 4.223768] initcall init_nlm+0x0/0x30 returned 0 after 68 usecs [ 4.223785] calling init_nls_cp437+0x0/0xc @ 1 [ 4.223801] initcall init_nls_cp437+0x0/0xc returned 0 after 1 usecs [ 4.223815] calling init_nls_cp737+0x0/0xc @ 1 [ 4.223829] initcall init_nls_cp737+0x0/0xc returned 0 after 0 usecs [ 4.223843] calling init_nls_cp775+0x0/0xc @ 1 [ 4.223856] initcall init_nls_cp775+0x0/0xc returned 0 after 0 usecs [ 4.223870] calling init_nls_cp850+0x0/0xc @ 1 [ 4.223884] initcall init_nls_cp850+0x0/0xc returned 0 after 0 usecs [ 4.223898] calling init_nls_cp852+0x0/0xc @ 1 [ 4.223912] initcall init_nls_cp852+0x0/0xc returned 0 after 0 usecs [ 4.223926] calling init_nls_cp855+0x0/0xc @ 1 [ 4.223940] initcall init_nls_cp855+0x0/0xc returned 0 after 0 usecs [ 4.223953] calling init_nls_cp857+0x0/0xc @ 1 [ 4.223967] initcall init_nls_cp857+0x0/0xc returned 0 after 0 usecs [ 4.223981] calling init_nls_cp860+0x0/0xc @ 1 [ 4.223995] initcall init_nls_cp860+0x0/0xc returned 0 after 0 usecs [ 4.224008] calling init_nls_cp861+0x0/0xc @ 1 [ 4.224022] initcall init_nls_cp861+0x0/0xc returned 0 after 0 usecs [ 4.224036] calling init_nls_cp862+0x0/0xc @ 1 [ 4.224050] initcall init_nls_cp862+0x0/0xc returned 0 after 0 usecs [ 4.224064] calling init_nls_cp863+0x0/0xc @ 1 [ 4.224078] initcall init_nls_cp863+0x0/0xc returned 0 after 0 usecs [ 4.224092] calling init_nls_cp864+0x0/0xc @ 1 [ 4.224106] initcall init_nls_cp864+0x0/0xc returned 0 after 1 usecs [ 4.224120] calling init_nls_cp865+0x0/0xc @ 1 [ 4.224134] initcall init_nls_cp865+0x0/0xc returned 0 after 0 usecs [ 4.224148] calling init_nls_cp866+0x0/0xc @ 1 [ 4.224162] initcall init_nls_cp866+0x0/0xc returned 0 after 0 usecs [ 4.224176] calling init_nls_cp869+0x0/0xc @ 1 [ 4.224190] initcall init_nls_cp869+0x0/0xc returned 0 after 0 usecs [ 4.224204] calling init_nls_cp874+0x0/0xc @ 1 [ 4.224218] initcall init_nls_cp874+0x0/0xc returned 0 after 0 usecs [ 4.224232] calling init_nls_cp932+0x0/0xc @ 1 [ 4.224246] initcall init_nls_cp932+0x0/0xc returned 0 after 0 usecs [ 4.224260] calling init_nls_euc_jp+0x0/0x54 @ 1 [ 4.224277] initcall init_nls_euc_jp+0x0/0x54 returned 0 after 2 usecs [ 4.224291] calling init_nls_cp936+0x0/0xc @ 1 [ 4.224305] initcall init_nls_cp936+0x0/0xc returned 0 after 0 usecs [ 4.224319] calling init_nls_cp949+0x0/0xc @ 1 [ 4.224333] initcall init_nls_cp949+0x0/0xc returned 0 after 0 usecs [ 4.224347] calling init_nls_cp950+0x0/0xc @ 1 [ 4.224362] initcall init_nls_cp950+0x0/0xc returned 0 after 0 usecs [ 4.224376] calling init_nls_cp1250+0x0/0xc @ 1 [ 4.224390] initcall init_nls_cp1250+0x0/0xc returned 0 after 0 usecs [ 4.224404] calling init_nls_cp1251+0x0/0xc @ 1 [ 4.224418] initcall init_nls_cp1251+0x0/0xc returned 0 after 0 usecs [ 4.224433] calling init_nls_ascii+0x0/0xc @ 1 [ 4.224447] initcall init_nls_ascii+0x0/0xc returned 0 after 0 usecs [ 4.224462] calling init_nls_iso8859_1+0x0/0xc @ 1 [ 4.224477] initcall init_nls_iso8859_1+0x0/0xc returned 0 after 0 usecs [ 4.224491] calling init_nls_iso8859_2+0x0/0xc @ 1 [ 4.224506] initcall init_nls_iso8859_2+0x0/0xc returned 0 after 0 usecs [ 4.224520] calling init_nls_iso8859_3+0x0/0xc @ 1 [ 4.224535] initcall init_nls_iso8859_3+0x0/0xc returned 0 after 0 usecs [ 4.224549] calling init_nls_iso8859_4+0x0/0xc @ 1 [ 4.224564] initcall init_nls_iso8859_4+0x0/0xc returned 0 after 0 usecs [ 4.224578] calling init_nls_iso8859_5+0x0/0xc @ 1 [ 4.224593] initcall init_nls_iso8859_5+0x0/0xc returned 0 after 0 usecs [ 4.224607] calling init_nls_iso8859_6+0x0/0xc @ 1 [ 4.224622] initcall init_nls_iso8859_6+0x0/0xc returned 0 after 1 usecs [ 4.224636] calling init_nls_iso8859_7+0x0/0xc @ 1 [ 4.224651] initcall init_nls_iso8859_7+0x0/0xc returned 0 after 0 usecs [ 4.224666] calling init_nls_cp1255+0x0/0xc @ 1 [ 4.224680] initcall init_nls_cp1255+0x0/0xc returned 0 after 1 usecs [ 4.224695] calling init_nls_iso8859_9+0x0/0xc @ 1 [ 4.224710] initcall init_nls_iso8859_9+0x0/0xc returned 0 after 1 usecs [ 4.224724] calling init_nls_iso8859_13+0x0/0xc @ 1 [ 4.224739] initcall init_nls_iso8859_13+0x0/0xc returned 0 after 1 usecs [ 4.224754] calling init_nls_iso8859_14+0x0/0xc @ 1 [ 4.224769] initcall init_nls_iso8859_14+0x0/0xc returned 0 after 1 usecs [ 4.224784] calling init_nls_iso8859_15+0x0/0xc @ 1 [ 4.224799] initcall init_nls_iso8859_15+0x0/0xc returned 0 after 1 usecs [ 4.224813] calling init_nls_koi8_r+0x0/0xc @ 1 [ 4.224827] initcall init_nls_koi8_r+0x0/0xc returned 0 after 1 usecs [ 4.224842] calling init_nls_koi8_u+0x0/0xc @ 1 [ 4.224856] initcall init_nls_koi8_u+0x0/0xc returned 0 after 1 usecs [ 4.224872] calling init_nls_koi8_ru+0x0/0x54 @ 1 [ 4.224887] initcall init_nls_koi8_ru+0x0/0x54 returned 0 after 1 usecs [ 4.224902] calling init_nls_utf8+0x0/0x28 @ 1 [ 4.224917] initcall init_nls_utf8+0x0/0x28 returned 0 after 2 usecs [ 4.224932] calling init_cifs+0x0/0x344 @ 1 [ 4.225273] initcall init_cifs+0x0/0x344 returned 0 after 301 usecs [ 4.225292] calling ipc_init+0x0/0x24 @ 1 [ 4.225323] msgmni has been set to 452 [ 4.225354] initcall ipc_init+0x0/0x24 returned 0 after 41 usecs [ 4.225372] calling ipc_sysctl_init+0x0/0x18 @ 1 [ 4.225513] initcall ipc_sysctl_init+0x0/0x18 returned 0 after 112 usecs [ 4.225530] calling crypto_wq_init+0x0/0x48 @ 1 [ 4.225674] initcall crypto_wq_init+0x0/0x48 returned 0 after 115 usecs [ 4.225694] calling crypto_algapi_init+0x0/0x10 @ 1 [ 4.225730] initcall crypto_algapi_init+0x0/0x10 returned 0 after 17 usecs [ 4.225748] calling skcipher_module_init+0x0/0x48 @ 1 [ 4.225765] initcall skcipher_module_init+0x0/0x48 returned 0 after 1 usecs [ 4.225781] calling chainiv_module_init+0x0/0xc @ 1 [ 4.225801] initcall chainiv_module_init+0x0/0xc returned 0 after 3 usecs [ 4.225816] calling eseqiv_module_init+0x0/0xc @ 1 [ 4.225833] initcall eseqiv_module_init+0x0/0xc returned 0 after 1 usecs [ 4.225849] calling hmac_module_init+0x0/0xc @ 1 [ 4.225865] initcall hmac_module_init+0x0/0xc returned 0 after 1 usecs [ 4.225880] calling crypto_null_mod_init+0x0/0x74 @ 1 [ 4.226236] initcall crypto_null_mod_init+0x0/0x74 returned 0 after 314 usecs [ 4.226256] calling md4_mod_init+0x0/0xc @ 1 [ 4.226358] initcall md4_mod_init+0x0/0xc returned 0 after 76 usecs [ 4.226377] calling md5_mod_init+0x0/0xc @ 1 [ 4.226482] initcall md5_mod_init+0x0/0xc returned 0 after 77 usecs [ 4.226501] calling sha1_generic_mod_init+0x0/0xc @ 1 [ 4.226603] initcall sha1_generic_mod_init+0x0/0xc returned 0 after 75 usecs [ 4.226621] calling sha256_generic_mod_init+0x0/0x3c @ 1 [ 4.226799] initcall sha256_generic_mod_init+0x0/0x3c returned 0 after 147 usecs [ 4.226819] calling crypto_ecb_module_init+0x0/0xc @ 1 [ 4.226838] initcall crypto_ecb_module_init+0x0/0xc returned 0 after 1 usecs [ 4.226854] calling crypto_cbc_module_init+0x0/0xc @ 1 [ 4.226872] initcall crypto_cbc_module_init+0x0/0xc returned 0 after 1 usecs [ 4.226888] calling des_generic_mod_init+0x0/0x3c @ 1 [ 4.227075] initcall des_generic_mod_init+0x0/0x3c returned 0 after 156 usecs [ 4.227093] calling aes_init+0x0/0xc @ 1 [ 4.227195] initcall aes_init+0x0/0xc returned 0 after 77 usecs [ 4.227211] calling arc4_init+0x0/0xc @ 1 [ 4.227311] initcall arc4_init+0x0/0xc returned 0 after 75 usecs [ 4.227329] calling deflate_mod_init+0x0/0xc @ 1 [ 4.227447] initcall deflate_mod_init+0x0/0xc returned 0 after 91 usecs [ 4.227467] calling crypto_authenc_module_init+0x0/0xc @ 1 [ 4.227486] initcall crypto_authenc_module_init+0x0/0xc returned 0 after 1 usecs [ 4.227503] calling crypto_authenc_esn_module_init+0x0/0xc @ 1 [ 4.227521] initcall crypto_authenc_esn_module_init+0x0/0xc returned 0 after 1 usecs [ 4.227537] calling lzo_mod_init+0x0/0xc @ 1 [ 4.227641] initcall lzo_mod_init+0x0/0xc returned 0 after 79 usecs [ 4.227658] calling krng_mod_init+0x0/0xc @ 1 [ 4.227760] initcall krng_mod_init+0x0/0xc returned 0 after 77 usecs [ 4.227779] calling proc_genhd_init+0x0/0x58 @ 1 [ 4.227824] initcall proc_genhd_init+0x0/0x58 returned 0 after 26 usecs [ 4.227841] calling noop_init+0x0/0x18 @ 1 [ 4.227852] io scheduler noop registered (default) [ 4.227867] initcall noop_init+0x0/0x18 returned 0 after 11 usecs [ 4.227882] calling deadline_init+0x0/0x18 @ 1 [ 4.227891] io scheduler deadline registered [ 4.227906] initcall deadline_init+0x0/0x18 returned 0 after 9 usecs [ 4.227920] calling cfq_init+0x0/0xb8 @ 1 [ 4.228049] io scheduler cfq registered [ 4.228075] initcall cfq_init+0x0/0xb8 returned 0 after 127 usecs [ 4.228092] calling init_kmp+0x0/0xc @ 1 [ 4.228107] initcall init_kmp+0x0/0xc returned 0 after 1 usecs [ 4.228121] calling init_bm+0x0/0xc @ 1 [ 4.228136] initcall init_bm+0x0/0xc returned 0 after 1 usecs [ 4.228151] calling init_fsm+0x0/0xc @ 1 [ 4.228165] initcall init_fsm+0x0/0xc returned 0 after 0 usecs [ 4.228181] calling percpu_counter_startup+0x0/0x1c @ 1 [ 4.228203] initcall percpu_counter_startup+0x0/0x1c returned 0 after 5 usecs [ 4.228218] calling pci_proc_init+0x0/0x7c @ 1 [ 4.228253] initcall pci_proc_init+0x0/0x7c returned 0 after 18 usecs [ 4.228269] calling comcerto_dma_init+0x0/0xc @ 1 [ 4.228573] initcall comcerto_dma_init+0x0/0xc returned 0 after 274 usecs [ 4.228592] calling pty_init+0x0/0x258 @ 1 [ 4.228914] initcall pty_init+0x0/0x258 returned 0 after 291 usecs [ 4.228934] calling serial8250_init+0x0/0x17c @ 1 [ 4.228945] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 4.445513] serial8250.0: ttyS0 at MMIO 0x96400000 (irq = 59) is a 16550A [ 7.796150] console [ttyS0] enabled [ 7.855418] initcall serial8250_init+0x0/0x17c returned 0 after 3541458 usecs [ 7.862603] calling serial8250_pci_init+0x0/0x18 @ 1 [ 7.867908] initcall serial8250_pci_init+0x0/0x18 returned 0 after 189 usecs [ 7.875012] calling rand_initialize+0x0/0x140 @ 1 [ 7.879927] initcall rand_initialize+0x0/0x140 returned 0 after 70 usecs [ 7.886706] calling topology_sysfs_init+0x0/0x70 @ 1 [ 7.891847] initcall topology_sysfs_init+0x0/0x70 returned 0 after 50 usecs [ 7.898868] calling init_sd+0x0/0x124 @ 1 [ 7.903441] initcall init_sd+0x0/0x124 returned 0 after 426 usecs [ 7.909601] calling init_sg+0x0/0x124 @ 1 [ 7.913954] initcall init_sg+0x0/0x124 returned 0 after 214 usecs [ 7.920109] calling ahci_init+0x0/0x18 @ 1 [ 7.924532] initcall ahci_init+0x0/0x18 returned 0 after 198 usecs [ 7.930769] calling ahci_init+0x0/0x14 @ 1 [ 7.935050] SATA Serdes: 24Mhz ref clk [ 7.939662] Serdes1: Lane OK Passed [ 7.943974] Serdes2: Lane OK Passed [ 7.947497] ahci ahci: forcing PORTS_IMPL to 0x3 [ 7.952217] ahci ahci: AHCI 0001.0300 32 slots 2 ports 3 Gbps 0x3 impl platform mode [ 7.960022] ahci ahci: flags: ncq sntf pm led clo only pmp pio slum part ccc apst [ 7.970123] scsi0 : ahci_platform [ 7.974165] scsi1 : ahci_platform [ 7.978010] ata1: SATA max UDMA/133 mmio [mem 0x9d000000-0x9d00ffff] port 0x100 irq 48 [ 7.985996] ata2: SATA max UDMA/133 mmio [mem 0x9d000000-0x9d00ffff] port 0x180 irq 48 [ 7.994050] calling 1_async_port_probe+0x0/0xd4 @ 6 [ 7.995253] calling 2_async_port_probe+0x0/0xd4 @ 12 [ 8.004174] initcall ahci_init+0x0/0x14 returned 0 after 67562 usecs [ 8.010585] calling init_mtd+0x0/0xd8 @ 1 [ 8.015819] initcall init_mtd+0x0/0xd8 returned 0 after 1070 usecs [ 8.022044] calling cmdline_parser_init+0x0/0xc @ 1 [ 8.027065] initcall cmdline_parser_init+0x0/0xc returned 0 after 1 usecs [ 8.033895] calling init_mtdchar+0x0/0xe0 @ 1 [ 8.038491] initcall init_mtdchar+0x0/0xe0 returned 0 after 84 usecs [ 8.044886] calling init_mtdblock+0x0/0xc @ 1 [ 8.049380] initcall init_mtdblock+0x0/0xc returned 0 after 3 usecs [ 8.055702] calling cfi_probe_init+0x0/0x18 @ 1 [ 8.060352] initcall cfi_probe_init+0x0/0x18 returned 0 after 1 usecs [ 8.066842] calling map_ram_init+0x0/0x18 @ 1 [ 8.071315] initcall map_ram_init+0x0/0x18 returned 0 after 0 usecs [ 8.077628] calling map_rom_init+0x0/0x18 @ 1 [ 8.082100] initcall map_rom_init+0x0/0x18 returned 0 after 0 usecs [ 8.088413] calling physmap_init+0x0/0xc @ 1 [ 8.093026] initcall physmap_init+0x0/0xc returned 0 after 214 usecs [ 8.099473] calling nand_base_init+0x0/0x20 @ 1 [ 8.104127] initcall nand_base_init+0x0/0x20 returned 0 after 4 usecs [ 8.110623] calling comcerto_nand_init+0x0/0xc @ 1 [ 8.115587] pdev->resource->start = c8300000, pdev->resource->end = c8301fff [ 8.122690] nand_probe: comcertonand base: 0xd08e0000 [ 8.127922] No NAND device found [ 8.131386] initcall comcerto_nand_init+0x0/0xc returned 0 after 15459 usecs [ 8.138507] calling ubi_init+0x0/0x2c8 @ 1 [ 8.143200] initcall ubi_init+0x0/0x2c8 returned 0 after 455 usecs [ 8.149451] calling ubi_gluebi_init+0x0/0x10 @ 1 [ 8.154190] initcall ubi_gluebi_init+0x0/0x10 returned 0 after 3 usecs [ 8.160773] calling designware_spi_init+0x0/0xc @ 1 [ 8.165842] designware_spi_probe:Initializing SPI Controller : Using dma=0 CLK(DUS)=200000000 Hz [ 8.174783] dwspi_init_hw: TX FIFO level 0 , RX FIFO level 0 [ 8.180756] comcerto_spi comcerto_spi.1: at 0x96500000 mapped to 0xD0920000, irq=60 [ 8.188517] designware_spi_probe:Initializing SPI Controller : Using dma=0 CLK(spi_i2c)=200000000 Hz [ 8.197805] dwspi_init_hw: TX FIFO level 0 , RX FIFO level 0 [ 8.203932] comcerto_spi comcerto_spi.0: at 0x90498000 mapped to 0xD0948000, irq=61 [ 8.211851] initcall designware_spi_init+0x0/0xc returned 0 after 44975 usecs [ 8.219062] calling net_olddevs_init+0x0/0xc0 @ 1 [ 8.223901] initcall net_olddevs_init+0x0/0xc0 returned 0 after 16 usecs [ 8.230659] calling broadcom_init+0x0/0x170 @ 1 [ 8.237438] initcall broadcom_init+0x0/0x170 returned 0 after 2058 usecs [ 8.244187] calling fixed_mdio_bus_init+0x0/0x104 @ 1 [ 8.249801] Fixed MDIO Bus: probed [ 8.253243] initcall fixed_mdio_bus_init+0x0/0x104 returned 0 after 3758 usecs [ 8.260578] calling tun_init+0x0/0x8c @ 1 [ 8.264700] tun: Universal TUN/TAP device driver, 1.6 [ 8.269805] tun: (C) 1999-2004 Max Krasnyansky [ 8.276279] initcall tun_init+0x0/0x8c returned 0 after 11290 usecs [ 8.282590] calling xhci_hcd_init+0x0/0x4c @ 1 [ 8.287428] ## xhci_plat_probe [ 8.290503] ### comcerto_start_xhci [ 8.294023] USB3.0 clock selected: internal [ 8.301385] xhci-hcd xhci-hcd: xHCI Host Controller [ 8.306400] /files/sq_kernel/linux/drivers/usb/core/inode.c: creating file 'devices' [ 8.314200] /files/sq_kernel/linux/drivers/usb/core/inode.c: creating file '001' [ 8.321665] xhci-hcd xhci-hcd: new USB bus registered, assigned bus number 1 [ 8.329835] xhci-hcd xhci-hcd: irq 54, io mem 0x9f000000 [ 8.335246] usb usb1: default language 0x0409 [ 8.339651] usb usb1: udev 1, busnum 1, minor = 0 [ 8.344384] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 8.351226] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 8.358497] usb usb1: Product: xHCI Host Controller [ 8.363403] usb usb1: Manufacturer: Linux 3.2.26 xhci-hcd [ 8.368839] usb usb1: SerialNumber: xhci-hcd [ 8.373449] ata2: SATA link down (SStatus 0 SControl 300) [ 8.378958] async_waiting @ 12 [ 8.382210] usb usb1: usb_probe_device [ 8.386015] usb usb1: configuration #1 chosen from 1 choice [ 8.391628] xHCI xhci_add_endpoint called for root hub [ 8.396809] xHCI xhci_check_bandwidth called for root hub [ 8.402260] usb usb1: adding 1-0:1.0 (config #1, interface 0) [ 8.408334] hub 1-0:1.0: usb_probe_interface [ 8.412633] hub 1-0:1.0: usb_probe_interface - got id [ 8.417733] hub 1-0:1.0: USB hub found [ 8.421523] hub 1-0:1.0: 1 port detected [ 8.425488] hub 1-0:1.0: standalone hub [ 8.429348] hub 1-0:1.0: no power switching (usb 1.0) [ 8.434426] hub 1-0:1.0: individual port over-current protection [ 8.440474] hub 1-0:1.0: Single TT [ 8.443897] hub 1-0:1.0: TT requires at most 8 FS bit times (666 ns) [ 8.450294] hub 1-0:1.0: power on to power good time: 20ms [ 8.455831] hub 1-0:1.0: local power source is good [ 8.460739] hub 1-0:1.0: trying to enable port power on non-switchable hub [ 8.467972] /files/sq_kernel/linux/drivers/usb/core/inode.c: creating file '001' [ 8.475537] xhci-hcd xhci-hcd: xHCI Host Controller [ 8.480459] /files/sq_kernel/linux/drivers/usb/core/inode.c: creating file '002' [ 8.487926] xhci-hcd xhci-hcd: new USB bus registered, assigned bus number 2 [ 8.495076] usb usb2: skipped 1 descriptor after endpoint [ 8.500531] usb usb2: default language 0x0409 [ 8.504934] usb usb2: udev 1, busnum 2, minor = 128 [ 8.509854] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 8.516690] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 8.523952] usb usb2: Product: xHCI Host Controller [ 8.528865] usb usb2: Manufacturer: Linux 3.2.26 xhci-hcd [ 8.534293] usb usb2: SerialNumber: xhci-hcd [ 8.539006] usb usb2: usb_probe_device [ 8.542786] usb usb2: configuration #1 chosen from 1 choice [ 8.548413] xHCI xhci_add_endpoint called for root hub [ 8.553580] xHCI xhci_check_bandwidth called for root hub [ 8.559039] usb usb2: adding 2-0:1.0 (config #1, interface 0) [ 8.565098] hub 2-0:1.0: usb_probe_interface [ 8.569424] hub 2-0:1.0: usb_probe_interface - got id [ 8.574506] hub 2-0:1.0: USB hub found [ 8.578309] hub 2-0:1.0: 1 port detected [ 8.582256] hub 2-0:1.0: standalone hub [ 8.586125] hub 2-0:1.0: no power switching (usb 1.0) [ 8.591204] hub 2-0:1.0: individual port over-current protection [ 8.597252] hub 2-0:1.0: TT requires at most 8 FS bit times (666 ns) [ 8.603641] hub 2-0:1.0: power on to power good time: 20ms [ 8.609179] hub 2-0:1.0: local power source is good [ 8.614086] hub 2-0:1.0: trying to enable port power on non-switchable hub [ 8.615181] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 8.627364] ata1.00: ATA-9: WDC WD30EFRX-68EUZN0, 82.00A82, max UDMA/133 [ 8.627475] hub 1-0:1.0: port 1: status 0101 change 0001 [ 8.639460] ata1.00: 5860533168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 8.646498] /files/sq_kernel/linux/drivers/usb/core/inode.c: creating file '001' [ 8.654281] ata1.00: configured for UDMA/133 [ 8.658633] async_waiting @ 6 [ 8.658664] initcall xhci_hcd_init+0x0/0x4c returned 0 after 362767 usecs [ 8.658682] calling usb_stor_init+0x0/0x44 @ 1 [ 8.658689] Initializing USB Mass Storage driver... [ 8.677943] async_continuing @ 6 after 1 usec [ 8.682845] usbcore: registered new interface driver usb-storage [ 8.682886] scsi 0:0:0:0: Direct-Access ATA WDC WD30EFRX-68E 82.0 PQ: 0 ANSI: 5 [ 8.683853] calling 3_sd_probe_async+0x0/0x1e0 @ 340 [ 8.684016] sd 0:0:0:0: [sda] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB) [ 8.684029] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 8.684297] sd 0:0:0:0: [sda] Write Protect is off [ 8.684310] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 8.684423] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 8.734083] USB Mass Storage support registered. [ 8.738755] initcall usb_stor_init+0x0/0x44 returned 0 after 78170 usecs [ 8.745511] calling dwc_otg_driver_init+0x0/0x74 @ 1 [ 8.750591] dwc_otg: version 2.93a 15-MAY-2011 [ 8.755298] hub 2-0:1.0: state 7 ports 1 chg 0000 evt 0000 [ 8.755703] initcall dwc_otg_driver_init+0x0/0x74 returned 0 after 4974 usecs [ 8.755733] calling dwc_common_port_init_module+0x0/0x18 @ 1 [ 8.755741] Module dwc_common_port init [ 8.755754] initcall dwc_common_port_init_module+0x0/0x18 returned 0 after 6 usecs [ 8.755769] calling serport_init+0x0/0x30 @ 1 [ 8.755782] initcall serport_init+0x0/0x30 returned 0 after 1 usecs [ 8.755795] calling mousedev_init+0x0/0x60 @ 1 [ 8.756046] mousedev: PS/2 mouse device common for all mice [ 8.756071] initcall mousedev_init+0x0/0x60 returned 0 after 248 usecs [ 8.756087] calling WD_btn_init+0x0/0x310 @ 1 [ 8.756425] input: btn_wd as /devices/virtual/input/input0 [ 8.756748] initcall WD_btn_init+0x0/0x310 returned 0 after 620 usecs [ 8.756765] calling cmos_init+0x0/0x44 @ 1 [ 8.757220] initcall cmos_init+0x0/0x44 returned -19 after 418 usecs [ 8.757237] calling c2k_rtc_init+0x0/0xc @ 1 [ 8.757762] c2k-rtc c2k-rtc: rtc core: registered c2k as rtc0 [ 8.757772] C2000 RTC, (c) 2012 Mindspeed Technologies [ 8.757904] c2k-rtc c2k-rtc: Warning: Invalid RTC value so initializing it [ 8.758135] initcall c2k_rtc_init+0x0/0xc returned 0 after 850 usecs [ 8.758152] calling sequoia_fan_init+0x0/0x98 @ 1 [ 8.758535] Registered fan device: system_fan [ 8.758561] initcall sequoia_fan_init+0x0/0x98 returned 0 after 375 usecs [ 8.758576] calling raid_init+0x0/0xc @ 1 [ 8.758585] md: raid1 personality registered for level 1 [ 8.758597] initcall raid_init+0x0/0xc returned 0 after 9 usecs [ 8.758611] calling cpufreq_stats_init+0x0/0xa8 @ 1 [ 8.758633] initcall cpufreq_stats_init+0x0/0xa8 returned 0 after 7 usecs [ 8.758647] calling cpufreq_gov_powersave_init+0x0/0xc @ 1 [ 8.758663] initcall cpufreq_gov_powersave_init+0x0/0xc returned 0 after 2 usecs [ 8.758676] calling cpufreq_gov_dbs_init+0x0/0x80 @ 1 [ 8.758693] initcall cpufreq_gov_dbs_init+0x0/0x80 returned 0 after 3 usecs [ 8.758706] calling cpufreq_gov_dbs_init+0x0/0xc @ 1 [ 8.758719] initcall cpufreq_gov_dbs_init+0x0/0xc returned 0 after 1 usecs [ 8.758732] calling gpio_led_init+0x0/0xc @ 1 [ 8.758967] initcall gpio_led_init+0x0/0xc returned 0 after 206 usecs [ 8.758984] calling sequoia_led_init+0x0/0xc0 @ 1 [ 8.759226] Registered led device: system_led [ 8.759439] Registered led device: wifi_led [ 8.759785] initcall sequoia_led_init+0x0/0xc0 returned 0 after 752 usecs [ 8.759805] calling flow_cache_init_global+0x0/0x1b4 @ 1 [ 8.985093] hub 1-0:1.0: state 7 ports 1 chg 0002 evt 0000 [ 8.985124] initcall flow_cache_init_global+0x0/0x1b4 returned 0 after 219999 usecs [ 8.985182] calling llc_init+0x0/0x24 @ 1 [ 8.985199] initcall llc_init+0x0/0x24 returned 0 after 2 usecs [ 8.985211] calling snap_init+0x0/0x44 @ 1 [ 8.985229] initcall snap_init+0x0/0x44 returned 0 after 4 usecs [ 8.985243] calling blackhole_module_init+0x0/0xc @ 1 [ 8.985259] initcall blackhole_module_init+0x0/0xc returned 0 after 3 usecs [ 8.985273] calling nfnetlink_init+0x0/0x28 @ 1 [ 8.985281] Netfilter messages via NETLINK v0.30. [ 8.985313] initcall nfnetlink_init+0x0/0x28 returned 0 after 23 usecs [ 8.985327] calling nfnetlink_queue_init+0x0/0xb8 @ 1 [ 8.985361] initcall nfnetlink_queue_init+0x0/0xb8 returned 0 after 18 usecs [ 8.985375] calling nfnetlink_log_init+0x0/0xe8 @ 1 [ 8.985421] initcall nfnetlink_log_init+0x0/0xe8 returned 0 after 29 usecs [ 8.985435] calling nf_conntrack_standalone_init+0x0/0xc @ 1 [ 8.985448] nf_conntrack version 0.5.0 (3625 buckets, 14500 max) [ 9.082637] hub 1-0:1.0: port 1, status 0101, change 0000, 12 Mb/s [ 9.089189] initcall nf_conntrack_standalone_init+0x0/0xc returned 0 after 101280 usecs [ 9.090754] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 9.090820] initcall 1_async_port_probe+0x0/0xd4 returned 0 after 1061203 usecs [ 9.090857] async_continuing @ 12 after 692208 usec [ 9.090875] initcall 2_async_port_probe+0x0/0xd4 returned 0 after 1069925 usecs [ 9.122367] calling ctnetlink_init+0x0/0xa0 @ 1 [ 9.127028] ctnetlink v0.93: registering with nfnetlink. [ 9.132385] initcall ctnetlink_init+0x0/0xa0 returned 0 after 5222 usecs [ 9.139137] calling xt_init+0x0/0xfc @ 1 [ 9.143202] initcall xt_init+0x0/0xfc returned 0 after 3 usecs [ 9.145230] hub 1-0:1.0: unable to enumerate USB device on port 1 [ 9.145254] hub 2-0:1.0: state 7 ports 1 chg 0000 evt 0002 [ 9.145282] hub 2-0:1.0: port 1, status 0203, change 0001, 5.0 Gb/s [ 9.167095] calling tcpudp_mt_init+0x0/0x10 @ 1 [ 9.167416] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 [ 9.177189] initcall tcpudp_mt_init+0x0/0x10 returned 0 after 4 usecs [ 9.179437] sd 0:0:0:0: [sda] Attached SCSI disk [ 9.179470] initcall 3_sd_probe_async+0x0/0x1e0 returned 0 after 483970 usecs [ 9.195481] calling mark_mt_init+0x0/0x44 @ 1 [ 9.199958] initcall mark_mt_init+0x0/0x44 returned 0 after 1 usecs [ 9.206273] calling connmark_mt_init+0x0/0x44 @ 1 [ 9.211097] initcall connmark_mt_init+0x0/0x44 returned 0 after 1 usecs [ 9.217762] calling classify_tg_init+0x0/0x10 @ 1 [ 9.222586] initcall classify_tg_init+0x0/0x10 returned 0 after 1 usecs [ 9.229249] calling hl_tg_init+0x0/0x10 @ 1 [ 9.233548] initcall hl_tg_init+0x0/0x10 returned 0 after 1 usecs [ 9.239687] calling led_tg_init+0x0/0xc @ 1 [ 9.243986] initcall led_tg_init+0x0/0xc returned 0 after 0 usecs [ 9.250131] calling nflog_tg_init+0x0/0xc @ 1 [ 9.254603] initcall nflog_tg_init+0x0/0xc returned 0 after 0 usecs [ 9.260917] calling nfqueue_tg_init+0x0/0x10 @ 1 [ 9.265661] initcall nfqueue_tg_init+0x0/0x10 returned 0 after 0 usecs [ 9.272228] calling xt_rateest_tg_init+0x0/0x2c @ 1 [ 9.277236] initcall xt_rateest_tg_init+0x0/0x2c returned 0 after 0 usecs [ 9.284065] calling tcpmss_tg_init+0x0/0x10 @ 1 [ 9.288723] initcall tcpmss_tg_init+0x0/0x10 returned 0 after 0 usecs [ 9.295209] calling tee_tg_init+0x0/0x10 @ 1 [ 9.299596] initcall tee_tg_init+0x0/0x10 returned 0 after 0 usecs [ 9.305167] hub 2-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x203 [ 9.313266] calling idletimer_tg_init+0x0/0xa8 @ 1 [ 9.318641] initcall idletimer_tg_init+0x0/0xa8 returned 0 after 415 usecs [ 9.325625] calling addrtype_mt_init+0x0/0x10 @ 1 [ 9.330453] initcall addrtype_mt_init+0x0/0x10 returned 0 after 2 usecs [ 9.337136] calling xt_cluster_mt_init+0x0/0xc @ 1 [ 9.342048] initcall xt_cluster_mt_init+0x0/0xc returned 0 after 0 usecs [ 9.348804] calling comment_mt_init+0x0/0xc @ 1 [ 9.353454] initcall comment_mt_init+0x0/0xc returned 0 after 0 usecs [ 9.359950] calling connbytes_mt_init+0x0/0xc @ 1 [ 9.364774] initcall connbytes_mt_init+0x0/0xc returned 0 after 0 usecs [ 9.371447] calling connlimit_mt_init+0x0/0x10 @ 1 [ 9.376373] initcall connlimit_mt_init+0x0/0x10 returned 0 after 1 usecs [ 9.383115] calling conntrack_mt_init+0x0/0x10 @ 1 [ 9.388040] initcall conntrack_mt_init+0x0/0x10 returned 0 after 1 usecs [ 9.394782] calling cpu_mt_init+0x0/0xc @ 1 [ 9.399096] initcall cpu_mt_init+0x0/0xc returned 0 after 0 usecs [ 9.405238] calling dccp_mt_init+0x0/0x60 @ 1 [ 9.409714] initcall dccp_mt_init+0x0/0x60 returned 0 after 1 usecs [ 9.416030] calling devgroup_mt_init+0x0/0xc @ 1 [ 9.420764] initcall devgroup_mt_init+0x0/0xc returned 0 after 0 usecs [ 9.427347] calling dscp_mt_init+0x0/0x10 @ 1 [ 9.431822] initcall dscp_mt_init+0x0/0x10 returned 0 after 1 usecs [ 9.438141] calling esp_mt_init+0x0/0x10 @ 1 [ 9.442529] initcall esp_mt_init+0x0/0x10 returned 0 after 0 usecs [ 9.445224] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 9.455319] calling hashlimit_mt_init+0x0/0x94 @ 1 [ 9.460357] initcall hashlimit_mt_init+0x0/0x94 returned 0 after 112 usecs [ 9.465653] usb 2-1: skipped 1 descriptor after endpoint [ 9.465666] usb 2-1: skipped 1 descriptor after endpoint [ 9.465679] usb 2-1: skipped 2 descriptors after endpoint [ 9.465689] usb 2-1: skipped 2 descriptors after endpoint [ 9.465699] usb 2-1: skipped 2 descriptors after endpoint [ 9.465709] usb 2-1: skipped 2 descriptors after endpoint [ 9.465777] usb 2-1: default language 0x0409 [ 9.466094] usb 2-1: udev 2, busnum 2, minor = 129 [ 9.466106] usb 2-1: New USB device found, idVendor=174c, idProduct=5136 [ 9.466118] usb 2-1: New USB device strings: Mfr=2, Product=3, SerialNumber=1 [ 9.466128] usb 2-1: Product: AS2105 [ 9.466135] usb 2-1: Manufacturer: ASMedia [ 9.466143] usb 2-1: SerialNumber: 00000000000000000000 [ 9.466618] usb 2-1: usb_probe_device [ 9.466634] usb 2-1: configuration #1 chosen from 1 choice [ 9.466711] usb 2-1: Successful Endpoint Configure command [ 9.466810] usb 2-1: adding 2-1:1.0 (config #1, interface 0) [ 9.467163] usb-storage 2-1:1.0: usb_probe_interface [ 9.467186] usb-storage 2-1:1.0: usb_probe_interface - got id [ 9.467577] scsi2 : usb-storage 2-1:1.0 [ 9.468440] /files/sq_kernel/linux/drivers/usb/core/inode.c: creating file '002' [ 9.468553] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0002 [ 9.468591] hub 1-0:1.0: port 1, status 0100, change 0001, 12 Mb/s [ 9.589664] calling helper_mt_init+0x0/0xc @ 1 [ 9.594228] initcall helper_mt_init+0x0/0xc returned 0 after 0 usecs [ 9.600637] calling hl_mt_init+0x0/0x10 @ 1 [ 9.604938] initcall hl_mt_init+0x0/0x10 returned 0 after 1 usecs [ 9.611082] calling iprange_mt_init+0x0/0x10 @ 1 [ 9.615830] initcall iprange_mt_init+0x0/0x10 returned 0 after 1 usecs [ 9.622396] calling length_mt_init+0x0/0x10 @ 1 [ 9.627060] initcall length_mt_init+0x0/0x10 returned 0 after 1 usecs [ 9.633540] calling limit_mt_init+0x0/0xc @ 1 [ 9.638025] initcall limit_mt_init+0x0/0xc returned 0 after 0 usecs [ 9.644330] calling mac_mt_init+0x0/0xc @ 1 [ 9.648640] initcall mac_mt_init+0x0/0xc returned 0 after 0 usecs [ 9.654772] calling multiport_mt_init+0x0/0x10 @ 1 [ 9.659701] initcall multiport_mt_init+0x0/0x10 returned 0 after 1 usecs [ 9.666459] calling xt_osf_init+0x0/0x7c @ 1 [ 9.670849] initcall xt_osf_init+0x0/0x7c returned 0 after 2 usecs [ 9.677081] calling owner_mt_init+0x0/0xc @ 1 [ 9.681554] initcall owner_mt_init+0x0/0xc returned 0 after 0 usecs [ 9.687871] calling pkttype_mt_init+0x0/0xc @ 1 [ 9.692520] initcall pkttype_mt_init+0x0/0xc returned 0 after 0 usecs [ 9.699012] calling policy_mt_init+0x0/0x10 @ 1 [ 9.703662] initcall policy_mt_init+0x0/0x10 returned 0 after 1 usecs [ 9.710155] calling quota_mt_init+0x0/0xc @ 1 [ 9.714629] initcall quota_mt_init+0x0/0xc returned 0 after 0 usecs [ 9.715162] hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x100 [ 9.728370] calling xt_rateest_mt_init+0x0/0xc @ 1 [ 9.733281] initcall xt_rateest_mt_init+0x0/0xc returned 0 after 0 usecs [ 9.740033] calling realm_mt_init+0x0/0xc @ 1 [ 9.744506] initcall realm_mt_init+0x0/0xc returned 0 after 0 usecs [ 9.750824] calling recent_mt_init+0x0/0x88 @ 1 [ 9.755508] initcall recent_mt_init+0x0/0x88 returned 0 after 20 usecs [ 9.762077] calling sctp_mt_init+0x0/0x10 @ 1 [ 9.766566] initcall sctp_mt_init+0x0/0x10 returned 0 after 1 usecs [ 9.772871] calling state_mt_init+0x0/0xc @ 1 [ 9.777356] initcall state_mt_init+0x0/0xc returned 0 after 0 usecs [ 9.783662] calling xt_layer7_init+0x0/0x98 @ 1 [ 9.788336] initcall xt_layer7_init+0x0/0x98 returned 0 after 9 usecs [ 9.794816] calling statistic_mt_init+0x0/0xc @ 1 [ 9.799652] initcall statistic_mt_init+0x0/0xc returned 0 after 0 usecs [ 9.806319] calling string_mt_init+0x0/0xc @ 1 [ 9.810880] initcall string_mt_init+0x0/0xc returned 0 after 0 usecs [ 9.817284] calling tcpmss_mt_init+0x0/0x10 @ 1 [ 9.821934] initcall tcpmss_mt_init+0x0/0x10 returned 0 after 1 usecs [ 9.828427] calling time_mt_init+0x0/0x90 @ 1 [ 9.832897] xt_time: kernel timezone is -0000 [ 9.837296] initcall time_mt_init+0x0/0x90 returned 0 after 4289 usecs [ 9.843862] calling u32_mt_init+0x0/0xc @ 1 [ 9.848173] initcall u32_mt_init+0x0/0xc returned 0 after 0 usecs [ 9.854304] calling sysctl_ipv4_init+0x0/0x98 @ 1 [ 9.860090] initcall sysctl_ipv4_init+0x0/0x98 returned 0 after 920 usecs [ 9.866946] calling init_syncookies+0x0/0x1c @ 1 [ 9.871775] initcall init_syncookies+0x0/0x1c returned 0 after 90 usecs [ 9.878445] calling ipcomp4_init+0x0/0x70 @ 1 [ 9.882922] initcall ipcomp4_init+0x0/0x70 returned 0 after 3 usecs [ 9.889237] calling ipip_init+0x0/0xac @ 1 [ 9.893450] initcall ipip_init+0x0/0xac returned 0 after 2 usecs [ 9.899503] calling tunnel4_init+0x0/0x68 @ 1 [ 9.903975] initcall tunnel4_init+0x0/0x68 returned 0 after 1 usecs [ 9.910295] calling xfrm4_transport_init+0x0/0x10 @ 1 [ 9.915480] initcall xfrm4_transport_init+0x0/0x10 returned 0 after 1 usecs [ 9.922484] calling xfrm4_mode_tunnel_init+0x0/0x10 @ 1 [ 9.927842] initcall xfrm4_mode_tunnel_init+0x0/0x10 returned 0 after 1 usecs [ 9.935037] calling ipv4_netfilter_init+0x0/0xc @ 1 [ 9.940049] initcall ipv4_netfilter_init+0x0/0xc returned 0 after 1 usecs [ 9.946893] calling nf_conntrack_l3proto_ipv4_init+0x0/0x130 @ 1 [ 9.953877] initcall nf_conntrack_l3proto_ipv4_init+0x0/0x130 returned 0 after 824 usecs [ 9.962039] calling nf_nat_init+0x0/0x130 @ 1 [ 9.966585] initcall nf_nat_init+0x0/0x130 returned 0 after 56 usecs [ 9.972978] calling nf_defrag_init+0x0/0x10 @ 1 [ 9.977641] initcall nf_defrag_init+0x0/0x10 returned 0 after 1 usecs [ 9.984120] calling ip_tables_init+0x0/0x98 @ 1 [ 9.988822] ip_tables: (C) 2000-2006 Netfilter Core Team [ 9.994171] initcall ip_tables_init+0x0/0x98 returned 0 after 5261 usecs [ 10.000930] calling iptable_filter_init+0x0/0x7c @ 1 [ 10.006096] initcall iptable_filter_init+0x0/0x7c returned 0 after 63 usecs [ 10.013101] calling iptable_mangle_init+0x0/0x58 @ 1 [ 10.018273] initcall iptable_mangle_init+0x0/0x58 returned 0 after 52 usecs [ 10.025302] calling nf_nat_standalone_init+0x0/0x88 @ 1 [ 10.030697] initcall nf_nat_standalone_init+0x0/0x88 returned 0 after 44 usecs [ 10.037979] calling ah_mt_init+0x0/0xc @ 1 [ 10.042190] initcall ah_mt_init+0x0/0xc returned 0 after 0 usecs [ 10.048245] calling ecn_mt_init+0x0/0xc @ 1 [ 10.052543] initcall ecn_mt_init+0x0/0xc returned 0 after 0 usecs [ 10.058691] calling clusterip_tg_init+0x0/0xa0 @ 1 [ 10.063616] ipt_CLUSTERIP: ClusterIP Version 0.8 loaded successfully [ 10.070030] initcall clusterip_tg_init+0x0/0xa0 returned 0 after 6274 usecs [ 10.077045] calling ecn_tg_init+0x0/0xc @ 1 [ 10.081344] initcall ecn_tg_init+0x0/0xc returned 0 after 0 usecs [ 10.087484] calling log_tg_init+0x0/0x30 @ 1 [ 10.091871] initcall log_tg_init+0x0/0x30 returned 0 after 2 usecs [ 10.098100] calling masquerade_tg_init+0x0/0x38 @ 1 [ 10.103104] initcall masquerade_tg_init+0x0/0x38 returned 0 after 7 usecs [ 10.109945] calling netmap_tg_init+0x0/0xc @ 1 [ 10.114504] initcall netmap_tg_init+0x0/0xc returned 0 after 0 usecs [ 10.120907] calling redirect_tg_init+0x0/0xc @ 1 [ 10.125652] initcall redirect_tg_init+0x0/0xc returned 0 after 0 usecs [ 10.132218] calling reject_tg_init+0x0/0xc @ 1 [ 10.136788] initcall reject_tg_init+0x0/0xc returned 0 after 0 usecs [ 10.143179] calling ulog_tg_init+0x0/0x100 @ 1 [ 10.147783] initcall ulog_tg_init+0x0/0x100 returned 0 after 28 usecs [ 10.154264] calling cubictcp_register+0x0/0x74 @ 1 [ 10.159182] TCP cubic registered [ 10.162434] initcall cubictcp_register+0x0/0x74 returned 0 after 3172 usecs [ 10.169449] calling inet6_init+0x0/0x284 @ 1 [ 10.174057] NET: Registered protocol family 10 [ 10.181834] initcall inet6_init+0x0/0x284 returned 0 after 7795 usecs [ 10.188356] calling ah6_init+0x0/0x70 @ 1 [ 10.192484] initcall ah6_init+0x0/0x70 returned 0 after 2 usecs [ 10.198458] calling ipcomp6_init+0x0/0x70 @ 1 [ 10.202933] initcall ipcomp6_init+0x0/0x70 returned 0 after 1 usecs [ 10.209251] calling xfrm6_tunnel_init+0x0/0xd8 @ 1 [ 10.214264] initcall xfrm6_tunnel_init+0x0/0xd8 returned 0 after 92 usecs [ 10.221114] calling tunnel6_init+0x0/0x64 @ 1 [ 10.225609] initcall tunnel6_init+0x0/0x64 returned 0 after 1 usecs [ 10.231914] calling xfrm6_transport_init+0x0/0x10 @ 1 [ 10.237099] initcall xfrm6_transport_init+0x0/0x10 returned 0 after 1 usecs [ 10.244104] calling xfrm6_mode_tunnel_init+0x0/0x10 @ 1 [ 10.249462] initcall xfrm6_mode_tunnel_init+0x0/0x10 returned 0 after 0 usecs [ 10.256657] calling xfrm6_ro_init+0x0/0x10 @ 1 [ 10.261219] initcall xfrm6_ro_init+0x0/0x10 returned 0 after 1 usecs [ 10.267627] calling sit_init+0x0/0x58 @ 1 [ 10.271745] IPv6 over IPv4 tunneling driver [ 10.279130] initcall sit_init+0x0/0x58 returned 0 after 7187 usecs [ 10.285410] calling ip6_tunnel_init+0x0/0x88 @ 1 [ 10.293440] initcall ip6_tunnel_init+0x0/0x88 returned 0 after 3197 usecs [ 10.300307] calling packet_init+0x0/0x48 @ 1 [ 10.304692] NET: Registered protocol family 17 [ 10.309249] initcall packet_init+0x0/0x48 returned 0 after 4438 usecs [ 10.315780] calling br_init+0x0/0x9c @ 1 [ 10.319985] initcall br_init+0x0/0x9c returned 0 after 151 usecs [ 10.326088] calling vlan_proto_init+0x0/0x8c @ 1 [ 10.330820] 8021q: 802.1Q VLAN Support v1.8 [ 10.335073] initcall vlan_proto_init+0x0/0x8c returned 0 after 4144 usecs [ 10.341944] calling vfp_init+0x0/0x198 @ 1 [ 10.346172] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 2 [ 10.353903] initcall vfp_init+0x0/0x198 returned 0 after 7548 usecs [ 10.360232] calling clk_disable_unused+0x0/0xcc @ 1 [ 10.365254] initcall clk_disable_unused+0x0/0xcc returned 0 after 10 usecs [ 10.372183] calling init_oops_id+0x0/0x44 @ 1 [ 10.376688] initcall init_oops_id+0x0/0x44 returned 0 after 13 usecs [ 10.383085] calling printk_late_init+0x0/0x70 @ 1 [ 10.387928] initcall printk_late_init+0x0/0x70 returned 0 after 3 usecs [ 10.394587] calling pm_debugfs_init+0x0/0x38 @ 1 [ 10.399359] initcall pm_debugfs_init+0x0/0x38 returned 0 after 18 usecs [ 10.406030] calling pm_qos_power_init+0x0/0xac @ 1 [ 10.411613] initcall pm_qos_power_init+0x0/0xac returned 0 after 633 usecs [ 10.418582] calling taskstats_init+0x0/0x84 @ 1 [ 10.423246] registered taskstats version 1 [ 10.427431] initcall taskstats_init+0x0/0x84 returned 0 after 4092 usecs [ 10.434178] calling clear_boot_tracer+0x0/0x34 @ 1 [ 10.439132] initcall clear_boot_tracer+0x0/0x34 returned 0 after 1 usecs [ 10.445894] calling max_swapfiles_check+0x0/0x8 @ 1 [ 10.450890] initcall max_swapfiles_check+0x0/0x8 returned 0 after 0 usecs [ 10.457752] calling random32_reseed+0x0/0xac @ 1 [ 10.462525] initcall random32_reseed+0x0/0xac returned 0 after 34 usecs [ 10.469199] calling pci_resource_alignment_sysfs_init+0x0/0x14 @ 1 [ 10.475532] initcall pci_resource_alignment_sysfs_init+0x0/0x14 returned 0 after 12 usecs [ 10.483757] calling pci_sysfs_init+0x0/0x58 @ 1 [ 10.488421] initcall pci_sysfs_init+0x0/0x58 returned 0 after 3 usecs [ 10.494903] calling random_int_secret_init+0x0/0x1c @ 1 [ 10.500303] initcall random_int_secret_init+0x0/0x1c returned 0 after 42 usecs [ 10.507601] calling scsi_complete_async_scans+0x0/0x12c @ 1 [ 10.513301] initcall scsi_complete_async_scans+0x0/0x12c returned 0 after 1 usecs [ 10.520845] calling rtc_hctosys+0x0/0x114 @ 1 [ 10.525425] c2k-rtc c2k-rtc: setting system clock to 2012-07-12 18:25:02 UTC (1342117502) [ 10.533657] initcall rtc_hctosys+0x0/0x114 returned 0 after 8132 usecs [ 10.540239] calling comcerto_cpufreq_init+0x0/0x28 @ 1 [ 10.545500] Registering CPUFreq(comcerto) [ 10.550299] initcall comcerto_cpufreq_init+0x0/0x28 returned 0 after 4660 usecs [ 10.550456] scsi 2:0:0:0: Direct-Access ASMT 2105 0 PQ: 0 ANSI: 6 [ 10.565851] calling net_secret_init+0x0/0x1c @ 1 [ 10.570645] initcall net_secret_init+0x0/0x1c returned 0 after 51 usecs [ 10.577347] calling tcp_congestion_default+0x0/0xc @ 1 [ 10.582613] initcall tcp_congestion_default+0x0/0xc returned 0 after 2 usecs [ 10.589725] calling initialize_hashrnd+0x0/0x1c @ 1 [ 10.594736] initcall initialize_hashrnd+0x0/0x1c returned 0 after 11 usecs [ 10.601882] async_waiting @ 1 [ 10.604870] async_continuing @ 1 after 0 usec [ 10.606039] calling 4_sd_probe_async+0x0/0x1e0 @ 340 [ 10.606817] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 10.608207] sd 2:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 10.608826] sd 2:0:0:0: [sdb] Write Protect is off [ 10.608841] sd 2:0:0:0: [sdb] Mode Sense: 43 00 00 00 [ 10.609425] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 10.646153] async_waiting @ 1 [ 18.610668] sdb: sdb1 [ 18.615046] sd 2:0:0:0: [sdb] Attached SCSI disk [ 18.619744] initcall 4_sd_probe_async+0x0/0x1e0 returned 0 after 7825860 usecs [ 18.627038] async_continuing @ 1 after 7790921 usec [ 18.631986] md: Waiting for all devices to be available before autodetect [ 18.638854] md: If you don't use raid, use raid=noautodetect [ 18.644547] async_waiting @ 1 [ 18.647546] async_continuing @ 1 after 0 usec [ 18.652909] md: Autodetecting RAID arrays. [ 18.676142] md: Scanned 2 and added 2 devices. [ 18.680612] md: autorun ... [ 18.683422] md: considering sda2 ... [ 18.687052] md: adding sda2 ... [ 18.690310] md: sda1 has different UUID to sda2 [ 18.694871] md: created md0 [ 18.697702] md: bind [ 18.700487] md: running: [ 18.704056] bio: create slab at 1 [ 18.708369] md/raid1:md0: active with 1 out of 2 mirrors [ 18.713808] md0: detected capacity change from 0 to 2047803392 [ 18.719902] md: considering sda1 ... [ 18.723525] md: adding sda1 ... [ 18.727683] md: created md1 [ 18.730500] md: bind [ 18.733272] md: running: [ 18.736974] md/raid1:md1: active with 1 out of 2 mirrors [ 18.742421] md1: detected capacity change from 0 to 2047803392 [ 18.748490] md: ... autorun DONE. [ 18.763756] md1: unknown partition table [ 19.084324] kjournald starting. Commit interval 5 seconds [ 19.084658] EXT3-fs (md1): using internal journal [ 19.084670] EXT3-fs (md1): recovery complete [ 19.084870] EXT3-fs (md1): mounted filesystem with ordered data mode [ 19.084921] VFS: Mounted root (ext3 filesystem) on device 9:1. [ 19.085505] async_waiting @ 1 [ 19.085514] async_continuing @ 1 after 0 usec [ 19.086228] Freeing init memory: 320K [ 47.785289] md0: unknown partition table [ 52.562708] calling fuse_init+0x0/0x1b8 [fuse] @ 2483 [ 52.567977] fuse init (API version 7.17) [ 52.572475] initcall fuse_init+0x0/0x1b8 [fuse] returned 0 after 4257 usecs [ 52.692144] calling pfe_module_init+0x0/0x28 [pfe] @ 2490 [ 52.697721] pfe_module_init [ 52.700592] pfe_platform_probe [ 52.704035] ipsec: baseaddr :9a000000 --- d0c00000 [ 52.709913] pfe_probe [ 52.712201] PFE Driver version: [ 52.712205] pfe_ctrl_nas_2_00_3 [ 52.712209] built with pfe sources version: pfe_nas_2_00_3 [ 52.724047] cbus_baseaddr: d3000000, ddr_baseaddr: d2000000, ddr_phys_baseaddr: 3400000, ddr_size: c00000 [ 52.733682] pfe_hw_init [ 52.736156] CLASS version: 20 [ 52.739139] TMU version: 1011231 [ 52.742384] BMU1 version: 21 [ 52.745290] BMU2 version: 21 [ 52.748185] EMAC1 network cfg: 80000 [ 52.751779] EMAC2 network cfg: 80000 [ 52.755418] EMAC3 network cfg: 80000 [ 52.759028] EGPI1 version: 50 [ 52.762021] EGPI2 version: 50 [ 52.765019] EGPI3 version: 50 [ 52.768054] HGPI version: 50 [ 52.770961] GPT version: 0 [ 52.773694] HIF version: 10 [ 52.776545] HIF NOPCY version: 10 [ 52.779894] UTIL version: 20 [ 52.782806] bmu_init(1) done [ 52.785737] bmu_init(2) done [ 52.808617] class_init() done [ 52.811622] tmu_init: mem init [ 52.814702] tmu_init: lmem init [ 52.817979] tmu_init() done [ 52.820795] util_init() done [ 52.823707] gpi_init(1) done [ 52.826647] gpi_init(2) done [ 52.829550] gpi_init(3) done [ 52.832447] gpi_init(hif) done [ 52.835529] bmu_enable(1) done [ 52.838599] bmu_enable(2) done [ 52.841671] pfe_hif_lib_init [ 52.844616] pfe_hif_lib_init: pfe packet size 4096, # rx buffers 256, # buffers/page 16 [ 52.852680] pfe_hif_init [ 52.855239] pfe_hif_alloc_descr [ 52.858783] pfe_hif_init_buffers [ 52.862210] pfe_firmware_init [ 53.045020] pfe_load_elf [ 53.082097] PFE binary version: pfe_nas_2_00_3 [ 53.086600] pfe_firmware_init: class firmware loaded 0xbc0 0xc3010000 [ 53.093074] pfe_load_elf [ 53.097795] pfe_firmware_init: tmu firmware loaded 0x1a0 [ 53.103136] pfe_load_elf [ 53.108267] pfe_firmware_init: util firmware loaded 0x1220 [ 53.113830] pfe_ctrl_init [ 53.146085] timer_add c30ade90 [ 53.149163] timer_add c30ade30 [ 53.152234] timer_add c30ade60 [ 53.155324] timer_add c30addd0 [ 53.158397] timer_add c30addb8 [ 53.161480] timer_add c30adde8 [ 53.165550] timer_add c30ade00 [ 53.168631] ipsec_common_hard_init ipsec_baseaddr:d0c00000 - espah_base:d0c00000 [ 53.177426] timer_add c30adda0 [ 53.180505] pfe_ctrl_init finished [ 53.183926] pfe_eth_init [ 53.185187] pfe_ctrl_timer [ 53.200455] Comcerto MDIO Bus: probed [ 53.208805] pfe_eth_init_one: preallocating rx & tx queue buffers [ 53.215313] eth0: pfe_eth_init_one: created interface, baseaddr: d3200000 [ 53.222153] pfe_pcap_init [ 53.225306] initcall pfe_module_init+0x0/0x28 [pfe] returned 0 after 514891 usecs [ 65.530103] eth0: pfe_eth_open [ 65.533807] hif_process_client_req: register client_id 0 [ 65.539286] pfe_hif_client_register [ 65.542838] eth0: pfe_gemac_init [ 65.546377] bcm54610_config_init: before 0x2c09, after 0x2c8c [ 65.552421] bcm54610_config_init: before 0x01e1, 0x0300; after 0x0141, 0x0200 [ 70.555661] PHY: comcerto-0:00 - Link is Up - 1000/Full [ 75.655179] eth0: no IPv6 routers present [ 78.192468] calling jnl_init+0x0/0x1a4 [jnl] @ 4307 [ 78.197544] jnl: driver (lke_9.2.0 lke_9.2.0_r248522_b40, LBD=ON) loaded at c30f0000 [ 78.205664] initcall jnl_init+0x0/0x1a4 [jnl] returned 0 after 7853 usecs [ 78.245632] ufsd: module license 'Commercial product' taints kernel. [ 78.252031] Disabling lock debugging due to kernel taint [ 78.285091] calling init_module+0x0/0x188 [ufsd] @ 4308 [ 78.290503] ufsd:: trace mask set to 0000000f [ 78.294897] ufsd: driver (lke_9.2.0 lke_9.2.0_r248522_b40, build_host("steveh-ubuntu"), acl, ioctl, bdi, sd2(0), fua, bz, tr, rsrc) loaded at c3130000 [ 78.294910] NTFS support included [ 78.294913] Hfs+/HfsJ support included [ 78.294917] optimized: speed [ 78.294920] Build_for__WD_Sequoia_k3.2.26_2015-03-06_lke_9.2.0_r248522_b40 [ 78.294926] [ 78.327314] initcall init_module+0x0/0x188 [ufsd] returned 0 after 35772 usecs [ 846.989175] EXT4-fs (sda4): barriers disabled [ 847.989892] EXT4-fs (sda4): mounted filesystem with writeback data mode. Opts: acl,user_xattr,data=writeback,barrier=0,init_itable=10 [ 848.087285] EXT4-fs (sda4): re-mounted. Opts: user_xattr,barrier=0,data=writeback [ 848.392097] EXT3-fs (md1): error: cannot change data mode on remount. The filesystem is mounted in data=ordered mode and you try to remount it in data=writeback mode. [ 862.247148] Adding 500672k swap on /dev/sda3. Priority:-1 extents:1 across:500672k [ 944.643326] calling init_module+0x0/0x200 [netatop] @ 6152 [ 944.649482] initcall init_module+0x0/0x200 [netatop] returned 0 after 440 usecs [28715.242662] hub 2-0:1.0: state 7 ports 1 chg 0000 evt 0002 [28715.248218] hub 2-0:1.0: warm reset port 1 [28715.310859] hub 2-0:1.0: port 1 not warm reset yet, waiting 50ms [28715.370828] hub 2-0:1.0: state 7 ports 1 chg 0000 evt 0002 [28715.376367] hub 2-0:1.0: port 1, status 02a0, change 0001, 5.0 Gb/s [28715.382699] usb 2-1: USB disconnect, device number 2 [28715.387692] usb 2-1: unregistering device [28715.391749] usb 2-1: unregistering interface 2-1:1.0 [28715.397869] sd 2:0:0:0: [sdb] Synchronizing SCSI cache [28715.403941] sd 2:0:0:0: [sdb] Result: hostbyte=0x01 driverbyte=0x00 [28715.411522] usb 2-1: usb_disable_device nuking all URBs [28715.417504] usb 2-1: Successful Endpoint Configure command [28715.580890] hub 2-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x2a0 [28739.705327] hub 2-0:1.0: state 7 ports 1 chg 0000 evt 0002 [28739.710927] hub 2-0:1.0: port 1, status 0203, change 0001, 5.0 Gb/s [28739.870796] hub 2-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x203 [28739.990862] usb 2-1: new SuperSpeed USB device number 3 using xhci-hcd [28740.011305] usb 2-1: skipped 1 descriptor after endpoint [28740.016653] usb 2-1: skipped 1 descriptor after endpoint [28740.022052] usb 2-1: skipped 2 descriptors after endpoint [28740.027486] usb 2-1: skipped 2 descriptors after endpoint [28740.032941] usb 2-1: skipped 2 descriptors after endpoint [28740.038374] usb 2-1: skipped 2 descriptors after endpoint [28740.043906] usb 2-1: default language 0x0409 [28740.048485] usb 2-1: udev 3, busnum 2, minor = 130 [28740.053328] usb 2-1: New USB device found, idVendor=174c, idProduct=5136 [28740.060070] usb 2-1: New USB device strings: Mfr=2, Product=3, SerialNumber=1 [28740.067260] usb 2-1: Product: AS2105 [28740.070870] usb 2-1: Manufacturer: ASMedia [28740.074990] usb 2-1: SerialNumber: 00000000000000000000 [28740.080543] usb 2-1: usb_probe_device [28740.084284] usb 2-1: configuration #1 chosen from 1 choice [28740.089881] usb 2-1: Successful Endpoint Configure command [28740.095541] usb 2-1: adding 2-1:1.0 (config #1, interface 0) [28740.101476] usb-storage 2-1:1.0: usb_probe_interface [28740.106486] usb-storage 2-1:1.0: usb_probe_interface - got id [28740.112573] scsi3 : usb-storage 2-1:1.0 [28740.116906] /files/sq_kernel/linux/drivers/usb/core/inode.c: creating file '003' [28741.111451] scsi 3:0:0:0: Direct-Access ASMT 2105 0 PQ: 0 ANSI: 6 [28741.120282] sd 3:0:0:0: Attached scsi generic sg1 type 0 [28741.130380] sd 3:0:0:0: [sdb] Spinning up disk.....ready [28743.171951] sd 3:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [28743.179993] sd 3:0:0:0: [sdb] Write Protect is off [28743.184861] sd 3:0:0:0: [sdb] Mode Sense: 43 00 00 00 [28743.190326] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [28743.228610] sdb: sdb1 [28743.232915] sd 3:0:0:0: [sdb] Attached SCSI disk [29577.878563] hub 2-0:1.0: state 7 ports 1 chg 0000 evt 0002 [29577.884151] hub 2-0:1.0: warm reset port 1 [29577.940837] hub 2-0:1.0: port 1 not warm reset yet, waiting 50ms [29578.000827] hub 2-0:1.0: state 7 ports 1 chg 0000 evt 0002 [29578.006365] hub 2-0:1.0: port 1, status 02a0, change 0001, 5.0 Gb/s [29578.012701] usb 2-1: USB disconnect, device number 3 [29578.017696] usb 2-1: unregistering device [29578.021745] usb 2-1: unregistering interface 2-1:1.0 [29578.027830] sd 3:0:0:0: [sdb] Synchronizing SCSI cache [29578.033207] sd 3:0:0:0: [sdb] Result: hostbyte=0x01 driverbyte=0x00 [29578.040539] usb 2-1: usb_disable_device nuking all URBs [29578.045904] usb 2-1: Successful Endpoint Configure command [29578.210905] hub 2-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x2a0 [29693.826662] hub 2-0:1.0: state 7 ports 1 chg 0000 evt 0002 [29693.832255] hub 2-0:1.0: port 1, status 0203, change 0001, 5.0 Gb/s [29693.990803] hub 2-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x203 [29694.110874] usb 2-1: new SuperSpeed USB device number 4 using xhci-hcd [29694.131259] usb 2-1: skipped 1 descriptor after endpoint [29694.136608] usb 2-1: skipped 1 descriptor after endpoint [29694.142386] usb 2-1: default language 0x0409 [29694.146976] usb 2-1: udev 4, busnum 2, minor = 131 [29694.151829] usb 2-1: New USB device found, idVendor=174c, idProduct=5136 [29694.158569] usb 2-1: New USB device strings: Mfr=2, Product=3, SerialNumber=1 [29694.165765] usb 2-1: Product: AS2105 [29694.169362] usb 2-1: Manufacturer: ASMedia [29694.173496] usb 2-1: SerialNumber: 00000000000000000000 [29694.179052] usb 2-1: usb_probe_device [29694.182783] usb 2-1: configuration #1 chosen from 1 choice [29694.188415] usb 2-1: Successful Endpoint Configure command [29694.194203] usb 2-1: adding 2-1:1.0 (config #1, interface 0) [29694.200109] usb-storage 2-1:1.0: usb_probe_interface [29694.205314] usb-storage 2-1:1.0: usb_probe_interface - got id [29694.211439] scsi4 : usb-storage 2-1:1.0 [29694.215973] /files/sq_kernel/linux/drivers/usb/core/inode.c: creating file '004' [29695.211686] scsi 4:0:0:0: Direct-Access ASMT 2105 0 PQ: 0 ANSI: 6 [29695.220816] sd 4:0:0:0: Attached scsi generic sg1 type 0 [29695.234268] sd 4:0:0:0: [sdb] Attached SCSI removable disk [29695.403029] sdb: detected capacity change from 1000204886016 to 0 [29740.828977] calling init_fat_fs+0x0/0x60 [fat] @ 12923 [29740.834547] initcall init_fat_fs+0x0/0x60 [fat] returned 0 after 174 usecs