Wrong Percentage Used value of SSD Black 250GB

Hi,
I have 4 SSDs (WDS250G2X0C)
Percentage Used value = 0% in 3 of them, which have Data Units Written 185TB, 16TB and 12TB respectively.
whereas
Percentage Used value = 29% in the remaining one, which has Data Units Written 59TB.

So only the last one seems to show correct Percentage Used value.

I see that FW Rev for 3 of them is different from the 1 showing correct reading, however it is used on a linux machine so not sure if it can be updated.

Is there a way to fix the Percentage Used reading?

More details:

$ sudo nvme list
Node             SN                   Model                                    Namespace Usage                      Format           FW Rev
---------------- -------------------- ---------------------------------------- --------- -------------------------- ---------------- --------
/dev/nvme0n1     184560801510         WDS250G2X0C-00L350                       1         250.06  GB / 250.06  GB    512   B +  0 B   101140WD


$ sudo nvme smart-log /dev/nvme0
Smart Log for NVME device:nvme0 namespace-id:ffffffff
critical_warning                    : 0
temperature                         : 30 C
available_spare                     : 100%
available_spare_threshold           : 10%
percentage_used                     : 0%
data_units_read                     : 113,792,718
data_units_written                  : 361,491,920
host_read_commands                  : 1,190,289,680
host_write_commands                 : 4,604,930,843
controller_busy_time                : 3,120
power_cycles                        : 119
power_on_hours                      : 27,051
unsafe_shutdowns                    : 116
media_errors                        : 0
num_err_log_entries                 : 0
Warning Temperature Time            : 0
Critical Composite Temperature Time : 0
Thermal Management T1 Trans Count   : 0
Thermal Management T2 Trans Count   : 0
Thermal Management T1 Total Time    : 0
Thermal Management T2 Total Time    : 0
$ sudo nvme list
Node             SN                   Model                                    Namespace Usage                      Format           FW Rev
---------------- -------------------- ---------------------------------------- --------- -------------------------- ---------------- --------
/dev/nvme0n1     184560801540         WDS250G2X0C-00L350                       1         250.06  GB / 250.06  GB    512   B +  0 B   101140WD


$ sudo nvme smart-log /dev/nvme0
Smart Log for NVME device:nvme0 namespace-id:ffffffff
critical_warning                    : 0
temperature                         : 30 C
available_spare                     : 100%
available_spare_threshold           : 10%
percentage_used                     : 0%
data_units_read                     : 4,685,447
data_units_written                  : 24,182,812
host_read_commands                  : 43,066,898
host_write_commands                 : 1,800,965,304
controller_busy_time                : 246
power_cycles                        : 98
power_on_hours                      : 32,270
unsafe_shutdowns                    : 97
media_errors                        : 0
num_err_log_entries                 : 0
Warning Temperature Time            : 0
Critical Composite Temperature Time : 0
Thermal Management T1 Trans Count   : 0
Thermal Management T2 Trans Count   : 0
Thermal Management T1 Total Time    : 0
Thermal Management T2 Total Time    : 0
$ sudo nvme list
Node             SN                   Model                                    Namespace Usage                      Format           FW Rev
---------------- -------------------- ---------------------------------------- --------- -------------------------- ---------------- --------
/dev/nvme0n1     184487800900         WDS250G2X0C-00L350                       1         250.06  GB / 250.06  GB    512   B +  0 B   101140WD

$ sudo nvme smart-log /dev/nvme0
Smart Log for NVME device:nvme0 namespace-id:ffffffff
critical_warning                    : 0
temperature                         : 31 C
available_spare                     : 100%
available_spare_threshold           : 10%
percentage_used                     : 0%
data_units_read                     : 1,630,327
data_units_written                  : 31,842,794
host_read_commands                  : 17,197,110
host_write_commands                 : 3,880,990,264
controller_busy_time                : 325
power_cycles                        : 205
power_on_hours                      : 29,990
unsafe_shutdowns                    : 203
media_errors                        : 0
num_err_log_entries                 : 0
Warning Temperature Time            : 0
Critical Composite Temperature Time : 0
Thermal Management T1 Trans Count   : 0
Thermal Management T2 Trans Count   : 0
Thermal Management T1 Total Time    : 0
Thermal Management T2 Total Time    : 0
$ sudo nvme list
Node             SN                   Model                                    Namespace Usage                      Format           FW Rev
---------------- -------------------- ---------------------------------------- --------- -------------------------- ---------------- --------
/dev/nvme0n1     182007800623         WDS250G2X0C-00L350                       1         250.06  GB / 250.06  GB    512   B +  0 B   101110WD



$ sudo nvme smart-log /dev/nvme0
Smart Log for NVME device:nvme0 namespace-id:ffffffff
critical_warning                    : 0
temperature                         : 28 C
available_spare                     : 100%
available_spare_threshold           : 10%
percentage_used                     : 29%
data_units_read                     : 14,997,065
data_units_written                  : 116,796,274
host_read_commands                  : 143,959,316
host_write_commands                 : 1,780,474,815
controller_busy_time                : 730
power_cycles                        : 103
power_on_hours                      : 32,446
unsafe_shutdowns                    : 102
media_errors                        : 0
num_err_log_entries                 : 0
Warning Temperature Time            : 0
Critical Composite Temperature Time : 0
Thermal Management T1 Trans Count   : 0
Thermal Management T2 Trans Count   : 0
Thermal Management T1 Total Time    : 0
Thermal Management T2 Total Time    : 0

Hi @dev123,

We would like to inform you that the WD Products are compatible with only Windows and macOS operating systems. we do not recommend using with the linux operating system

Please contact the WD Technical Support team for best assistance and troubleshooting:https://support-en.wd.com/app/ask