Hello,
My EX4100 is running firmware version 2.11.133
I recently was unable to reach my EX4100 at its assigned IP address on my internal 10.x.y.z network.
It is a DHCP client of my firewall and is assigned 10.x.y.2. I power-cycled it and it came up fine and all is well.
I’m now looking at all traffic that is coming from it and I see a constant ECHO REQUEST from it to 192.168.49.1. I’ve never configured it to use this IP address. I’ve explored its settings, but I can’t figure out why it is doing this.
Any ideas?
Best regards,
Jerald