My problem with MyCloud WD 3TB drive began at the start of SSH. After entering the commands:
I turned off SSH access. After this point, the cloud stopped working both locally and remotely. Reset the device and began to burn bright light, then flash - did not turn blue. I tried to do DEFAULT SYSTEM button, but it did not help.
Searching the internet I found that the device is a “brick”. I found the guides how-to “unbrick”. It’s about this topic: http://community.wd.com/t5/My-Cloud/GUIDE-How-To-Unbrick-your-2TB-3TB-4TB-My-Cloud/td-p/765959
Unfortunately, it did not help. I tried to restore trying different combinations:
Installing version of the WD 2TB and 3TB
Unpacking image using systems: Windows, Mac OSX and Linux
Deleting partitions using GParted
Copying Image: USB and a second SSD
I was copying the image before the command ‘dd’
Each time the light shone, and occasionally blink. The network card is working properly (combined). I perform ‘time-out’ with the ‘ping’ of the device.
I would like to ask if anyone knows the solution to the problem? How many of you after the “un-brick” to start the device?