WDC WDS500G SSD Warranty

A few days ago our school bought a WDC WDS500G SSD. After three days of use, the installed system showed that it was completely worn out. (“Media_Wearout_Indicator” is 001).
The value of “Total_Bad_Blocks” is also worrying.

Can the drive be repaired or replaced?
Is there a warranty on the drive?
Please help, analyze the smart data

The S.M.A.R.T data:


smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.4.73-1-pve] (local build)
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family: WD Blue and Green SSDs
Device Model: WDC WDS500G2B0A-00SM50
Firmware Version: 415000WD
User Capacity: 500,107,862,016 bytes [500 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Form Factor: 2.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-4 T13/BSR INCITS 529 revision 5
SATA Version is: SATA 3.3, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Tue Dec 29 11:08:52 2020 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x11) SMART execute Offline immediate.
No Auto Offline data collection support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
No Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 10) minutes.

SMART Attributes Data Structure revision number: 4
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
5 Reallocated_Sector_Ct 0x0032 100 100 — Old_age Always - 0
9 Power_On_Hours 0x0032 100 100 — Old_age Always - 107
12 Power_Cycle_Count 0x0032 100 100 — Old_age Always - 36
165 Block_Erase_Count 0x0032 100 100 — Old_age Always - 1507343
166 Minimum_PE_Cycles_TLC 0x0032 100 100 — Old_age Always - 0
167 Max_Bad_Blocks_per_Die 0x0032 100 100 — Old_age Always - 238
168 Maximum_PE_Cycles_TLC 0x0032 100 100 — Old_age Always - 1
169 Total_Bad_Blocks 0x0032 100 100 — Old_age Always - 1133
170 Grown_Bad_Blocks 0x0032 100 100 — Old_age Always - 0
171 Program_Fail_Count 0x0032 100 100 — Old_age Always - 0
172 Erase_Fail_Count 0x0032 100 100 — Old_age Always - 0
173 Average_PE_Cycles_TLC 0x0032 100 100 — Old_age Always - 0
174 Unexpected_Power_Loss 0x0032 100 100 — Old_age Always - 4
184 End-to-End_Error 0x0032 100 100 — Old_age Always - 0
187 Reported_Uncorrect 0x0032 100 100 — Old_age Always - 0
188 Command_Timeout 0x0032 100 100 — Old_age Always - 0
194 Temperature_Celsius 0x0022 073 031 — Old_age Always - 27 (Min/Max 21/31)
199 UDMA_CRC_Error_Count 0x0032 100 100 — Old_age Always - 0
230 Media_Wearout_Indicator 0x0032 001 001 — Old_age Always - 0x000300000003
232 Available_Reservd_Space 0x0033 100 100 004 Pre-fail Always - 100
233 NAND_GB_Written_TLC 0x0032 100 100 — Old_age Always - 90
234 NAND_GB_Written_SLC 0x0032 100 100 — Old_age Always - 116
241 Host_Writes_GiB 0x0030 253 253 — Old_age Offline - 109
242 Host_Reads_GiB 0x0030 253 253 — Old_age Offline - 4
244 Temp_Throttle_Status 0x0032 000 100 — Old_age Always - 0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error

1 Short offline Completed without error 00% 34 -

Selective Self-tests/Logging not supported