WD20EARS never completes long SMART test?

48 hours ago, having discovering that my WD20EARS drive was showing relocated sectors, I decided to run the long SMART test.  For the past 24 hours, it has reported that the test has 10% remaining.  I unmounted all the partitions on the device for the last 12 hours, hoping that would help, but it appears that it might be stuck.

Also, considering that this drive is only ~2 months old and already has reallocated sectors, I am wondering if WD would replace the drive since it is still under warranty and, considering I have another WD drive in the same machine with 4.5 years of powered-on time and 0 relocated sectors, I am not very happy that this drive is already showing signs of failure.

smartctl 5.39.1 2010-01-28 r3054 [x86_64-unknown-linux-gnu] (local build)Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net=== START OF INFORMATION SECTION ===Device Model: WDC WD20EARS-00S8B1Serial Number: WD-WCAVY2850527Firmware Version: 80.00A80User Capacity: 2,000,398,934,016 bytesDevice is: Not in smartctl database [for details use: -P showall]ATA Version is: 8ATA Standard is: Exact ATA specification draft version not indicatedLocal Time is: Wed Jun 30 18:00:01 2010 CDTSMART support is: Available - device has SMART capability.SMART support is: Enabled=== START OF READ SMART DATA SECTION ===SMART overall-health self-assessment test result: PASSEDGeneral SMART Values:Offline data collection status: (0x82)	Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled.Self-test execution status: ( 241)	Self-test routine in progress... 10% of test remaining.Total time to complete Offline data collection: (40800) seconds.Offline data collectioncapabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported.SMART capabilities: (0x0003)	Saves SMART data before entering power-saving mode. Supports SMART auto save timer.Error logging capability: (0x01)	Error logging supported. General Purpose Logging supported.Short self-test routine recommended polling time: ( 2) minutes.Extended self-test routinerecommended polling time: ( 255) minutes.Conveyance self-test routinerecommended polling time: ( 5) minutes.SCT capabilities: (0x3031)	SCT Status supported. SCT Feature Control supported. SCT Data Table supported.SMART Attributes Data Structure revision number: 16Vendor Specific SMART Attributes with Thresholds:ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0 3 Spin_Up_Time 0x0027 150 150 021 Pre-fail Always - 9458 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 15 5 Reallocated_Sector_Ct 0x0033 195 195 140 Pre-fail Always - 37 7 Seek_Error_Rate 0x002e 200 195 000 Old_age Always - 0 9 Power_On_Hours 0x0032 098 098 000 Old_age Always - 1635 10 Spin_Retry_Count 0x0032 100 253 000 Old_age Always - 0 11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 13192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 9193 Load_Cycle_Count 0x0032 195 195 000 Old_age Always - 16632194 Temperature_Celsius 0x0022 110 096 000 Old_age Always - 42196 Reallocated_Event_Count 0x0032 163 163 000 Old_age Always - 37197 Current_Pending_Sector 0x0032 199 198 000 Old_age Always - 612198 Offline_Uncorrectable 0x0030 199 198 000 Old_age Offline - 589199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0200 Multi_Zone_Error_Rate 0x0008 197 197 000 Old_age Offline - 627SMART Error Log Version: 1No Errors LoggedSMART Self-test log structure revision number 1Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error# 1 Short offline Completed without error 00% 1587 -SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testingSelective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk.If Selective self-test is pending on power-up, resume after 0 minute delay.