I recently obtained two WD10EADS drives still in the box and want to put them an external two-drive enclosure attached to my POGO. It recognizes the #1 drive but the #2 drive has a blinking blue light (error). I think it may be a jumper setting. Does anyone know how to get into the WD Archives to get detailed information about these drives?
The hard drive model in question is a standard SATA unit, and as such jumper settings should not matter unless you would like to limit the unit’s performance. However, since one hard drive is not working while the other one is not (Assuming you have confirmed hard drives are not using jumpers), then I’d recommend running a health test on the unit to confirm if there is a hardware issue.