UPS Settings In GUI

I would like to see the settings for the UPS added to the GUI.  I currently have my UPS connected via the USB port on the back of the EX2.  The EX2 will not shutdown until the UPS battery gets to 10%.  This is unacceptable because my UPS like many is prone to a very steep battery fall-off after 50%.  This causes the UPS to go ahead and drop to zero output BEFORE the EX2 can get shutdown.  Because of this I would like to error on the side of caution and be able to tell my EX2 to shutdown as soon as it receives the running on battery message from my UPS. 

If you’re using a UPS please vote for this!

13 Likes

I would second that vote, plus please document that a UPS will work with this device. The

only way I found out about it was searching through discussions.