Please, have anyone a solution for this BUG?
I use a CAT5 baloon from NILES and i only can see 480p thru the projector Panasonic with 1080i resolution.
Tks
SOLVED
Please, have anyone a solution for this BUG?
I use a CAT5 baloon from NILES and i only can see 480p thru the projector Panasonic with 1080i resolution.
Tks
SOLVED
Hi Flavio,
Not entirely sure I understand your setup… but what may help would be knowing:
What firmware do you have installed?
What model Panasonic projector?
What model NILES CAT-5 Baluns are you using?
Let’s go
Firmware: last from WD original 1_02_21
My projector: panasonic pt-4000u
http://www.projectorcentral.com/panasonic_ae4000_projector_review.htm
Niles full hd ballon HDMI TO CAT5 RECEIVER AND TRANSMITER
http://www.nilesaudio.com/product-.php?prodID=C5-HDMI%20T&recordID=CAT-5%20Baluns&categoryID=Cat-5%20Baluns&catcdID=&prdcdID=FG01565
Thanks for the details. :)
On the face of it, it looks like everything should work. The Niles Baluns are HDCP compliant, as is the Panasonic projector.
Have you tried a hard / factory reset since updating your firmware?
Push the reset button on the side of the unit (un-bent paperclip works well). Unit will reset after 1 second.
Go to Settings > System Setting > Reset to Factory Defaults. Unit will reboot.
Once unit has rebooted, go to standby and unplug the power for 5-10 minutes.
It’s frustrating but firmware updates don’t seem to fully integrate until the above has been done, which can cause odd issues. Let us know if that helps.
I have a feeling that this will not work for you my friend. Not until WD will enable a forced output of selected resolution. If you can’t get it to work, get yourself a 1st gen WDTV, it will force output any selected resolution. I have both and only the Live version seem to be stuck on 480p. Good luck!!!
I will tray, Tks
It does not work.
NO WORK!!!
BUGS BUGS BUGS…
I doubt you’ll get help from WD, they used to have great support. But now, they won’t even try to correct such a simple simple problem. There is a thread in a modified fw, here:
http://forum.wdlxtv.com/viewtopic.php?f=33&t=311
Hopefully they can solve this problem.
Otherwise, consider an edid emulator, they are usually dvi, not hdmi, but will pass all resolutions. I might get one myself to solve this problem. They are around $100, which ■■■■■, but what options do we have.
Please fix this problem!
Anyone can fix it ??
HELP
THIS WEEKEND I SOLVED
Hi, I fixed. One of my cable Cat5 had a pair changed.
It worked with my HDTV 1080i signal from brazil but does not work with others midias
Then i disconnect everything and reconnect testing each conection and i found a problem with the CAT5 connector, one side of the plug had a pair of the connector changed.
Thanks all
SOLVED.
Good for you. You might want to mark this problem solved, so that others might benefit.
Reach out to Support for more assistance.