My book live 体验版安装教程[experience Installation Guide ]

my book live下面简称MBL


简述安装过程

下载 http://download.wdc.com/nas/apnc-024303-022-20130916.deb最新版

做好系统备份,用7z解压下载的原厂固件,rootfs.img复制到\MYBOOKLIVE\Public\bak里,即使万一安装失败,只要点击硬盘后面的红色恢复按钮,不用拆机就可以恢复出厂设置,并且文件夹文件不丢失!也是卸载SOMEWOOD系统的好方法!!

1.就是使用putty连接到MBL 使用MBL的IP连接,默认用户名是root 密码是welc0me

2.复制粘贴运行代码

3.遇到N/Y 选择Y

4.遇到填空题就填pass,就是MYSQL的数据库密码,反正你填什么都可以但是你自己记住了

5.安装大概30分钟左右,看你网络速度了

6.注意事项 

如果是升级安装请先升级原厂固件,升级一般不会造成您硬盘的资料文件丢失,但是防止万一,还是请您备份您硬盘的资料!!!

你的MBL原厂固件要是最新版的,老版本的不行!

前面的2个 y/n 选择的时候不能错,要选择y,(如果选错就不安装了,在运行一次安装代码就可以了)其他的错了也没事情的不会对你设置造成伤害的!!

SOMEWOOD软件程序无论安装还是卸载不会造成您硬盘任何资料丢失和损坏,但是防止万一,还是请您备份您硬盘的资料!!!也可以干净卸载,体验版不含任何后门程序和广告代码!


下面是详细安装过程


首先备份设置

这个备份设置是为了方便恢复原厂系统,遇到任何问题点后面的恢复按钮就可以恢复西数原厂系统,也是卸载这个软件包的好方法!


1.备份


首先找到你下载的原厂固件 http://download.wdc.com/nas/apnc-024303-022-20130916.deb

然后下载7z解压软件, http://sparanoid.com/lab/7z/根据你操作系统下载你是32位的系统就下载32位的软件

[Google translate]

Description of the installation process

Download  http://download.wdc.com/nas/apnc-024303-022-201309 16.deb latest version

Do a system backup, use 7z unzip the downloaded original firmware, rootfs.img copied to the \ \ MYBOOKLIVE \ Public \ bak years, even in case the installation fails, simply click on the hard drive to restore the red button on the back, you can restore the factory without disassemble settings and folder file is not lost! Also a good way to uninstall SOMEWOOD system! !

1 is to use putty to connect to MBL MBL IP connection using the default user name is root password is welc0me

2 Copy and paste the code to run

3 encounter N / Y to select Y

4 encounter fill in the blank to fill in pass, is the MYSQL database password, anyway, but what you can fill yourself remember

  1. Install about 30 minutes or so, see your network speed up

6 Cautions 

Please upgrade if you are upgrading the factory installed firmware upgrade usually does not cause your hard drive data file is missing, but to prevent the event, or ask you to back up your hard disk information! ! !

If your original firmware MBL latest version, the old version does not work!

In front of the two y / n can not select the wrong time, to choose y, (if you choose the wrong is not installed, install the code running on it) the other wrong things did not hurt would you set of! !

SOMEWOOD either install or uninstall software programs on your hard drive without causing any data loss and damage, but to prevent the event, or ask you to back up your hard drive data! ! ! You can also clean and uninstall trial version does not contain any backdoors and advertising code!

-------------------------------------------------- —

Here are the details of the installation process


First backup settings

This backup set to restore the original system is to facilitate encounter any problems behind the recovery button you can restore the original Western Digital systems also uninstall this package a good way!


1 backup


First, find your original firmware download  http://download.wdc.com/nas/apnc-024303-022-201309 16.deb

Then download 7z decompression software,  http://sparanoid.com/lab/7z/ depending on your operating system to download your 32-bit system software to download 32

打开这个地址 http://mybooklive/UI/ssh


2.正式安装


1.下载 http://somewood.cn/soft/putty.rar

2.打开压缩包,解压文件,选择putty,连接MBL

-------------------------------------------------- -------------------------------------------------- ------

  1. Formal installation

-------------------------------------------------- -------------------------------------------------- ------

1 download  http://somewood.cn/soft/putty.rar

2 Open the archive, unzip the file, select putty, connecting MBL

填写你的MBL IP地址 [Fill in your MBL IP address]

默认用户名是root 密码是 welc0me [The default user name is root password is welc0me]

粘贴以下代码就可以安装了

注意一下:MY BOOK LIVE要连接互联网才可以下载安装的!!!

wget -q http://somewood.cn/mybooklive/4/tiyan/install/install.sh -O /tmp/install.sh
chmod 777 /tmp/install.sh
/tmp/install.sh INSTALL

 [

Paste the following code can be installed

Note: MY BOOK LIVE To connect to the Internet before you can download and install! ! !

wget-q http://somewood.cn/mybooklive/4/tiyan/install/inst all.sh -O / tmp / install.sh
chmod 777 / tmp / install.sh
/ Tmp / install.sh INSTALL

]

数据密码填pass [Fill pass data encryption]

再来一次pass [Again pass]

遇到这个选第一个点击键盘确定键就可以了合计遇到2次    [The first encounter this election keyboard click the OK button on it 2 times in total encounter]                          

看到下面提示就是安装完成了!![See the following tips that installation is complete! !]

设备重启后,在浏览器打开http://mybooklive/ui就是somewood的界面了,或者使用http://IP/ui

建议清空浏览器缓存,如果不会清空缓存请百度一下!

默认用户名是somewood 密码是pass


卸载方法

第一种方法:在升级页面升级原厂固件,用WINSCP删除/DataVolume/somewood文件夹就可以干净不留痕迹的卸载了。

第二种方法:如果您做过备份,点击硬盘后门的红色的恢复按钮恢复出厂设置,如果没做过备份点恢复按钮无效!

以上2种选择一种就可以了!

[

After the device restarts, open the browser interface http://mybooklive/ui is somewood, or make use http://IP/ui

Recommend clearing your browser cache, if not empty the cache, please Baidu it!

The default user name is somewood password is pass

-------------------------------------------------- ------------------

Uninstall

The first method: upgrade the original firmware upgrade page, delete / DataVolume / somewood folder with WINSCP can clean, without leaving any traces of uninstalled.

The second method: If you did back up, click on the hard drive to restore the back door of the red button to restore factory settings, if not done the restore button backup point invalid!

The above two kinds to choose a can!]


Thanks for sharing