MC Shutdown

I’ve noticed a minor quirk. I have the MC on a power strip which I turn OFF every night after using a BAT file to shut it down. As I turn the power strip OFF the MC’s LED flashes briefly. At first I thought it was my power strip’s switch was re-powering somehow but if I pull the adapter from the strip it does the same thing. My Megabit switch is on the same power strip if that has something to do with it.

Probably some undefined logic behaviour as the power supply drops below operating specification, which causes the LED to be turned on briefly. Not that uncommon in electronic systems, although it needs to be considered more carefully if you’re controlling something more critical than an LED…

Providing you’re not noticing any behaviour problems, I wouldn’t worry about it.