KAD79 wrote:> this isn’t a firmware issue
this is a wireless throughput issue
your network needs to be properly set up
and throughput tested
you’ll see this with any device on any network, trying to push more data than the link is capable off
also on 2.4ghz band there’s generally a good amount of interference, unless you live in the middle of noware, and don’t own any phones, etc …
you also don’t even mention how accessing content
wifi - well ok
so using smb, nfs, dnla
from what server, etc …
Nonsense. I’m got plenty of throughput. I’ve been using this device for months without a problem, and after downgrading the firmware, it worked fine again. If you had read my post, you would know that. Also, I did indeed mention how I was accessing my files (again, read my post).
More likely, the issue is I need to cycle power and/or reset, as the responders above were kind enough to suggest.
