Hi so i had an old macbook air laptob that i installed a ssd in as main drive. And it had a partition for windows 7 on it as well which i used bootcam to use it. Recently i decided that i dont use the macbook anymore and wanted to use the ssd(480 sata 2.5) on my lenovo y700 as extra space. So i removed my old hdd and replaced it with my ssd( i had 2 hard drives on my y700 one 128gb ssd for my windows as c and the old hdd as data) and when i did it my windows didnt boot up so i removed it and booted up my windows and connect it internally when windows was on and jt couldnt detect it. Tried many ways but it didnt recognise it and didnt even show anything in disk management. The only place i could see it was in bios information. I tried connecting it externally via an adapter and when i did it couldnt load anything when i connected it to my laptob so i connected it to another mac and aaw the partitions there i tried formating them there but nothing worked i could only see files as if they were read only. I connected it to my lenovo with another adapter and i could finally see the partitions in diak manager and tried formating and deleting them bit it kept not deleting i used other apps like crystal and macdrive and minitool partition… Nothing worked it kept either giving error or show it was successful but the changes went back to how they were i even tried wd dashboard when it was connected internally and it did finally detect it( it couldnt before) but it couldnt diagnose or update it. And when i checked its health it was ahowing 96% healthy. So i tried cmd commands and it kept giving io device error
Honestly im out of ideas and i dont know what else to do i really need help
And now in bios it doesnt even say wd its showing the image below
New update it now shows wd green 2.5 480GB on bios information again
