Best regard
Your help please
I was trying to install a VPN server on my PPT WD MyCloud, based on the following:
http://geekland.hol.es/crear-un-servidor-vpn-pptp/
sudo apt-get install pptpd
Configure the IP 192.168.10.7
but in the process also configure iptables:
sudo nano / etc / rc.local
iptables-t nat-A POSTROUTING-s 192.168.10.0/27-o eth0-j MASQUERADE
Following the procedure.
Restart the device, but now I have no access, and the yellow LED is blinking.
Since probe with crossover cable and a laptop, introducing a clip, but the problem persists.
I thought of placing network with USB cable, but another says POST does not.
Please suggestions.