FTP acces on the sharespace 4tb after upgrade firmware


#1

Can somebody tell we how i have to log on to the ftp server again. it workt until de upgrade.

2011/02/23 20:55:49  [admin] FAIL MKDIR: Client “145.53.83.72”, “/FTP/Maandag”
 2011/02/23 20:55:48  [admin] OK LOGIN: Client “145.53.83.72”
 2011/02/23 20:55:47  CONNECT: Client “145.53.83.72”

read / write / access rule are al set.

can somewone tell my wats wrong:cry:

FTPlog

220 vsFTPd 2.0.4+ (ext.3) ready…
Host type (1): Automatic Detect
USER Server
331 Please specify the password.
PASS (hidden)
230 Login successful.
SYST
215 UNIX Type: L8
Host type (2): Unix (Standard)
Sending “FEAT” command to determine what features this server supports.
FEAT
211-Features:
 EPRT
 EPSV
 MDTM
 PASV
 UTF8
 REST STREAM
 SIZE
 TVFS
211 End
Finished interpreting “FEAT” response.
Sending the FEAT command is optional.  You can disable it in the site options of the profile.
PWD
257 “/”
CWD /
250 Directory successfully changed.
PWD
257 “/”
TYPE A
200 Switching to ASCII mode.
PASV
500 OOPS: child died
PASV Not Supported
XPSV
It appears that the connection is dead.  Attempting reconnect…
Connecting to 82.173.53.*.*
Connected to 82.173.53.*.* in 0.062500 seconds, Waiting for Server Response
220 vsFTPd 2.0.4+ (ext.3) ready…
Host type (1): Automatic Detect
USER Server
331 Please specify the password.
PASS (hidden)
230 Login successful.
SYST
215 UNIX Type: L8
Host type (2): Unix (Standard)
PWD
257 “/”
New connection OK.  Reissuing command.
TYPE A
200 Switching to ASCII mode.
PORT 192,168,2,2,8,115
200 PORT command successful. Consider using PASV.
LIST
425 Failed to establish connection.


#2

Here are the steps to access FTP

Note: The username and password are case sensitive so make sure that you are typing with the same case that you used to create the user on the drive

  • You should now have access to the file system on the drive as long as nothing is blocking connection.

Note: You can view the current IP of the drive by logging into the Storage Manager and then click on System Status

FTP://USER@PASS:IPADDRESS

*USER(USER NAME)

*PASS(PASSWORD)

*ADDRESS(ACTUAL IP ADDRESS USED) MUST BE STATIC


#3

Sorry I didnt mean to put smiley faces in the message I guess thats how it shows the answer If you take a look at the bottom of the message you will see the correct FTP procedure.

FTP://USER@PASS:IP ADDRESS