Formatted a Black² Dual Drive and it cannot see the SSD partition

I recently reinstalled Windows 8 on my Black² Dual Drive when it was formatted it appears that the SSD partition disappeared and it only shows what I believe is the HDD part of the drive how do I get my computer to see the SSD partition and allow Windows to be installed on it, any help would be grateful.

Hi trekmeister2k, have you checked if the SSD partition is seen on the Disk Management window? Check the link below for more information on this. 

How to access Disk Management in Windows XP, Vista, 7 or 8 to manage hard drives

I have had a look and this is all I see, I have posted a screenshot of the window

screenshot.jpg

It made me understand something.

I think I have good ideas from you.

Can anybody throw some light on my situation as I’m still puzzled.

Hi again, sorry for the delay? Have you tried using the WD Black² Installation Software? If you have and the problem still continues, I recommend you to contact tech support directly. 

http://support.wdc.com/country/index.asp

1 Like

jubei04 wrote:

Hi again, sorry for the delay? Have you tried using the WD Black² Installation Software? If you have and the problem still continues, I recommend you to contact tech support directly. 

 

http://support.wdc.com/country/index.asp

Many thanks for your help I have tried to install the software and it cannot recognise the drive, I shall contact the tech support directly.