Do these results mean my hard drive failing?

smartctl 6.2 2013-07-26 r3841 [i686-linux-3.13.0-46-generic] (local build) Copyright © 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Scorpio Blue Serial ATA Device Model: WDC WD3200BEVT-22A23T0 Serial Number: [Deleted] LU WWN Device Id: 5 0014ee 6574f00c8 Firmware Version: 01.01A01 User Capacity: 320,072,933,376 bytes [320 GB] Sector Size: 512 bytes logical/physical Rotation Rate: 5400 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS (minor revision not indicated) SATA Version is: SATA 2.6, 3.0 Gb/s Local Time is: Sat Mar 21 19:01:09 2015 EDT SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 8100) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 82) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x7037) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 7472 3 Spin_Up_Time 0x0027 149 127 021 Pre-fail Always - 1508 4 Start_Stop_Count 0x0032 093 093 000 Old_age Always - 7315 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 5 7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0 9 Power_On_Hours 0x0032 095 095 000 Old_age Always - 3743 10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0 11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 098 098 000 Old_age Always - 2981 191 G-Sense_Error_Rate 0x0032 001 001 000 Old_age Always - 1873 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 201 193 Load_Cycle_Count 0x0032 183 183 000 Old_age Always - 53570 194 Temperature_Celsius 0x0022 112 097 000 Old_age Always - 31 196 Reallocated_Event_Count 0x0032 195 195 000 Old_age Always - 5 197 Current_Pending_Sector 0x0032 198 198 000 Old_age Always - 153 198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0008 100 253 000 Old_age Offline - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed: read failure 90% 3740 96629537 # 2 Conveyance offline Completed: read failure 90% 3712 96629537 # 3 Short offline Completed: read failure 90% 3712 96629537 # 4 Extended offline Completed: read failure 90% 3712 96629537 # 5 Extended offline Completed: read failure 90% 3293 96629537 # 6 Conveyance offline Completed: read failure 90% 3293 96629537 # 7 Short offline Completed: read failure 10% 3286 108007997 # 8 Short offline Completed: read failure 10% 3285 117686655 SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.

Hi NeilN, welcome to the WD Community. If you want to check your drives health, try running a test using DLG. Click on the link below for more information. 

How to test a drive for problems using Data Lifeguard Diagnostics for Windows

http://wdc.custhelp.com/app/answers/detail/a_id/940

Or use hard disk sentinel

Its another option