Debian+swebos


#1

Download address

Https://pan.baidu.com/s/1CJN1ygDdOK09pG2da3WQng

Use python+js+debian to control your MYCLOUD GEN2

Installation method

  1. download usbrecovery.tar.gz

Unzip the boot into your U disk device

Downloading root.tar.gz does not have to unzip it to the U disk

2.U disk is inserted into the USB port of the MYcloud Gen2 device, the power is reactivated and the red light is flickering.

Please use the putty telnet protocol to link your MYcloud Gen2. Note that the IP address of the device will be a new address at this time.

  1. run the following command

======

Echo’y’|mkfs.ext4 /dev/sda3

MKDIR -p /mnt/usb /mnt/root

Mount /dev/sda3 /mnt/root

Mount /dev/sdb1 /mnt/usb

Tar zxvf /mnt/usb/root.tar.gz -C /mnt

CD /

Umount /mnt/root /mnt/usb

Sync

Reboot -f

  1. restore WD SOFT

Insert the U disk into the device, plug the power red light flashing, use the putty link device to run the following commands

===

MKDIR -p /mnt/usb /mnt/root

Mount /dev/sda3 /mnt/root

Mount /dev/sdb1 /mnt/usb

CP -r /mnt/usb/boot /mnt/root/

CD /mnt/root/boot

RM uImage uRamdisk

MV uImage-wdrecovery uImage

MV uRamdisk-wdrecovery uRamdisk

CD /

Umount /mnt/root /mnt/usb

Sync

Reboot -f