# Can't attach a second WD Drive

**URL:** <https://community.wd.com/t/cant-attach-a-second-wd-drive/255724>\
**Category:** My Passport\
**Created:** [September 2, 2020, 9:41pm UTC](https://community.wd.com/t/cant-attach-a-second-wd-drive/255724 "2020-09-02T21:41:15Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![simeva](https://avatars.discourse-cdn.com/v4/letter/s/6bbea6/32.png) [@simeva](https://community.wd.com/u/simeva)\
**Post date:** [September 2, 2020, 9:41pm UTC](https://community.wd.com/t/cant-attach-a-second-wd-drive/255724/1 "2020-09-02T21:41:15Z")

</div>

I have two My Passport drives. Both work when attached on their own, but when one is plugged in the second never appears.

I have tried the solution here [Can't use Two My Passport Essential at the same time - #8 by DiscJocky](http://community.wd.com/t/cant-use-two-my-passport-essential-at-the-same-time/8664/8), and successfully changed the Unique Disk ID, but it does not make any difference.

I tried reformatting one of the drives, as suggested here - [Can you connect 2 passports at the same time? - #7 by Nathan\_H](http://community.wd.com/t/can-you-connect-2-passports-at-the-same-time/7311/7) - but that didn’t work either.

And when I run diskmgmt.msc, then I only see one of the drives.

What should I do next?

---

<div class="post-metadata">

**Author:** ![simeva](https://avatars.discourse-cdn.com/v4/letter/s/6bbea6/32.png) [@simeva](https://community.wd.com/u/simeva)\
**Post date:** [September 2, 2020, 9:52pm UTC](https://community.wd.com/t/cant-attach-a-second-wd-drive/255724/2 "2020-09-02T21:52:07Z")

</div>

Ha! - it turns out one of my USB ports has failed…

So, problem solved 🙂
