everything was ok till yesterday…after activation, files were loaded and than t GIU picture wasn’t there?
I assumed that hdmi cabel was a problem but it wasn’t…total black tv screen. any suggestion?
Tnx
Use the reset button; see if that fixes it.
…nothing at all…:mansad:
kozolec wrote:
everything was ok till yesterday…after activation, files were loaded and than t GIU picture wasn’t there?
I assumed that hdmi cabel was a problem but it wasn’t…total black tv screen. any suggestion?
Tnx
Try the composite cable to see if you can get a picture.
no signal too, through the composite cable…
Is the power light on and does anything happen when you recycle the power on the WDTV (unplug the power for a few minutes and then plug back in)
Yes, everything seems normal because wd works normaly, means that after the device is switched on, lights flashing and than it stops normally…but during this time the TV screen is black…also after recycling the power nothing happens… I am afraid it is an serous error or something…
Have you tried it with another TV?
yes, same thing
I think its time to contact WD or the supplier regarding a replacement.
gosh…anyway WD is now on way to reseler…I will wait what they will say.
thanks folks
