Aging WD Black WD1002FAEX 1TB drive

I pulled this old drive from one of my systems that fail and I was wondering if it would be a good idea to keep the drive or scrap it.
Any ideas?

Chkdsk results:
Windows has made corrections to the file system.
No further action is required.

976759807 KB total disk space.
113748 KB in 9 files.
76 KB in 15 indexes.
4 KB in bad sectors.
96015 KB in use by the system.
65536 KB occupied by the log file.
976549964 KB available on disk.

   4096 bytes in each allocation unit.

244189951 total allocation units on disk.
244137491 allocation units available on disk.

SMART readings:
Reallocation Event Count
Current Pending Sector Count
Uncorrectable Sector Count
UltraDMA CRC Error Count
Write Error Rate

ID, status, Value, Worst, Threshold, Raw
C4: OK, 200, 200, 0, 0
C5: OK, 200, 200, 0, 1
C6: OK, 200, 200, 0, 1
C7: OK, 200, 200, 0, 0
C8: OK, 200, 200, 0, 1

WD DLG results
Quick test: PASS
Extended test: In progress
Quick erase: PASS
Full erase: FAIL (Sector erase errors)

7 long hours later…

Test Option: EXTENDED TEST
Model Number: WDC WD1002FAEX-00Z3A0
Unit Serial Number: WD-WCATR7259358
Firmware Number: 05.01D05
Capacity: 1000.20 GB
SMART Status: PASS
Test Result: PASS
Test Time: 20:16:28, July 24, 2018

New values after the extended test.
ID, status, Value, Worst, Threshold, Raw
C4: OK, 200, 200, 0, 0
C5: OK, 200, 200, 0, 0
C6: OK, 200, 200, 0, 1
C7: OK, 200, 200, 0, 0
C8: OK, 200, 200, 0, 1

Give the full SMART report with all values.

CrystalDiskInfo (windows) or smartmontools (linux)

Just an update, that drive finally failed. The arm kept getting stuck and it was giving me the “click of death”.