New EX4. installed two 4 TB drives in RAID 1. setup some iSCSI and shares and move all my data. Now i would like to repurpose the two 2 TB drives in my PC RAID 1 to the EX4 as an additional RAID 1 volume. However i am getting the feeling that i cannot simply create a new RAID 1 volume with the 2 TB drives. it seems i have to redefine my RAID whcih will cause my current volume to lose all its data. Shirely i can add a new RAID 1 volume without affecting my current RAID 1 volume. How is this done?
Many thanks for any assisstance.
Richard
1 Like
Hello,
I recommend that you contact support directly for this one.
Phone Support
1 Like
Thanks for the reply. It took a couple of calls but I got it resolved.
For others that may have a similar issue the changes are made in the Storage - RAID section. Click the Change RAID Mode button and you will receive the message in the second image below. Click OK and you will get the third image. The option is no longer available to me but were i have circled in the third image is the option to add a new volume. There you will also indicate the type of configuration for the volume being added.
Richard
