A piece of hard drive has been broken off

                                                                  Hello Everybody !

Hey guys! Anything I can do about this ?

Please, take a look at that.

This is a kind of hard drive:

[Deleted]

I can’t believe it that I did this !.. All the hard drive connectors are so delicate ?

Hi well WD wont cover damage caused by you. You need to go buy a new drive.

OMG o.O

did you do some wrong pressure on the cables or something?

i dont know how can you repair this

If it’s a desktop environment, and if you can solder, then the solution is relatively cheap and easy.

Just hardwire a legacy 4-pin Molex power connector to your hard drive’s +5V and +12V power pins.

http://pinouts.ru/Power/sata-power_pinout.shtml
http://pinouts.ru/Power/BigPower_pinout.shtml

If you can’t do it yourself, then your local TV/AV repair shop may be able to do it for you.

@Hammey

Copy that.

@DavidSucesso

Yes, I did so. That was it.

@fzabkar

Well, I don’t worry about this anylonger. I trashed this out today in the morning. 

Thank you for a good advice and willingness to help anyway.

I talked to some computer technician about this today. “I could do this but I would charge you that much that you would have been better off to buy a new hard drive” - he said.