I have a router NETGEAR JNR3210
When copying files to the player via cable, the speed is 100Mbps.
When copying via wi-fi, the speed is 50Mbps.
Is it normal speed for a player wi-fi connection?
Hi oldman777, that looks about right.
Thank you Ichigo.
Had never used the SMP via WiFi.
Assumed the player WiFi speed 300Mbps.
Turns out in fact 150Mbps.
50 Mbps is a pretty decent real-life speed for a 150 Mbps Wireless-N adapter. With a 54 Mbps Wireless-G adapter, you can get up to 25 Mbps in real-life, under optimal conditions.
how is this solved, all the info above is wrong
the WD is
N @ 2x Mimo = 300 max
but it can only connect to whatever your router is broadcasting
so if your router is broadcasting N on a 20mhz instead of 40mhz, then you are limited by your router to 150
KAD79, For me speed is 50 Mbps when router broadcasting N on a 40mhz,
and if router broadcasting on a 20mhz the speed down till 30Mbps.
If I understand you correctly,
your SMP USB drive can be copied files via WI-FI 100Mbps real speed, on a 40mhz?
yes, if you search for bandwidth_test on this forum you’ll find some actuall network test from me, I think hightest throughput I ever achieved was approx 120 mbps over NFS
but there’s a lot of factors that effect wireless networking,
so if the signal is poor due to distance or wall obstructions, improperly set up, etc …
then throughput will vary
