Reply
Occasional Visitor
icefog
Posts: 2
Registered: ‎05-13-2012

Re: New Release - Firmware Version 1.08.17 for WD TV Live Streaming Media Player (5/7/12)

Updated this AM

 

Now device CANNOT detect any of my shared folders (only gives me /users as an option) where my media is housed on my network.  Worked flawlessly before.  Now, despite double-checking the settings, it is like the device went blind.

 

What is going on?

 

Thanks!

Advisor
bohdank
Posts: 18
Registered: ‎03-01-2012
0

Re: New Release - Firmware Version 1.08.17 for WD TV Live Streaming Media Player (5/7/12)

I can still login to Deezer from my PC.

Honored Contributor
TonyPh12345
Posts: 17,991
Registered: ‎01-11-2010
0

Re: New Release - Firmware Version 1.08.17 for WD TV Live Streaming Media Player (5/7/12)


Melandryu wrote:

Autoframe still not working? i tested a tv show 720p and my tv show its going at 1080p 60hz....


Post the MEDIAINFO for that file.

 

The fact that it's 720p doesn't mean much.   It's the frame rate that matters, not the resultion.

 

===Live SMP / Live Hub x2 / Live+ / Live x2 / 24 TBytes of QNAP + WD NAS ===
Occasional Visitor
Fluff
Posts: 3
Registered: ‎05-13-2012
0

Re: New Release - Firmware Version 1.08.17 for WD TV Live Streaming Media Player (5/7/12)

OK lesson learned, do not update unless the new firmware has something you need AND you've given it a week to see if it's bugged.

 

My MKV/x264  playback went down the toilet with 1.018.17, alot of stuttering, unwatchable. MLB.tv playback stopped/stuttered *alot* more than  1.017.18, I also got randomly kicked out mid gamea, and taken to a screen showing 'this game will begin shortly' while the screen fickered and the spinning cursor thing appeared. This was on a WIRED network, I also tried wireless, which was as expected, as bad.

 

Not impressed this firmware was released.


Rolled back to 1.017.18 now, everything back to normal.

 

 

Frequent Advisor
wdtv101
Posts: 26
Registered: ‎12-26-2011
0

Re: New Release - Firmware Version 1.08.17 for WD TV Live Streaming Media Player (5/7/12)

Looks like a lot of usefull playback fixes. I am still on original fw. It has a few quirks, but operational from my prospective. WD listened to users? Not sure yet...

Occasional Advisor
Melandryu
Posts: 10
Registered: ‎01-01-2012
0

Re: New Release - Firmware Version 1.08.17 for WD TV Live Streaming Media Player (5/7/12)

General
UniqueID/String : 249755076608128344666601370999367696516 (0xBBE513FD10EBF52692102F11FCB08084)
Nombre completo : E:\-= SERIES =-\The.Walking.Dead.S02E08\the.walking.dead.s02e08.720p.mkv
Formato : Matroska
Tamaño del archivo : 945MB
Duración : 40min.
Tasa de bits total : 3 246Kbps
Película : The.Walking.Dead.S02E08.720p
Fecha de codificación : UTC 2012-02-12 23:03:33
Aplicación de codifición : mkvmerge v4.8.0 ('I Got The...') creado el May 24 2011 03:12:58
Librería de codificación : libebml v1.2.0 + libmatroska v1.1.0

Video
ID : 1
Formato : AVC
Formato/Info : Advanced Video Codec
Formato del perfil : High@L4.1
Ajustes del formato, CABAC : Si
Ajustes del formato, RefFrames : 4marcos
Modo Muxing : Header stripping
ID Códec : V_MPEG4/ISO/AVC
Duración : 40min.
Tasa de bits : 3 022Kbps
Ancho : 1 280pixeles
Alto : 720pixeles
Relación de aspecto : 16:9
Velocidad de cuadro : 25,000fps
ColorSpace : YUV
ChromaSubsampling : 4:2:0
BitDepth/String : 8bits
Tipo de exploración : Progresivo
Bits/(Pixel*cuadro) : 0.131
Tamaño de pista : 879MB (93%)
Título : x264
Librería de codificación : x264 core 115 r2008 4c552d8
Opciones de codificación : cabac=1 / ref=3 / deblock=1:-1:-1 / analyse=0x3:0x113 / me=hex / subme=7 / psy=1 / psy_rd=1.00:0.15 / mixed_ref=1 / me_range=16 / chroma_me=1 / trellis=1 / 8x8dct=1 / cqm=0 / deadzone=21,11 / fast_pskip=1 / chroma_qp_offset=-3 / threads=8 / sliced_threads=0 / nr=0 / decimate=1 / interlaced=0 / bluray_compat=0 / constrained_intra=0 / bframes=3 / b_pyramid=2 / b_adapt=1 / b_bias=0 / direct=1 / weightb=1 / open_gop=0 / weightp=2 / keyint=250 / keyint_min=25 / scenecut=40 / intra_refresh=0 / rc_lookahead=40 / rc=crf / mbtree=1 / crf=20.0 / qcomp=0.60 / qpmin=0 / qpmax=69 / qpstep=4 / ip_ratio=1.40 / aq=1:1.00
Idioma : Español

Audio
ID : 2
Formato : MPEG Audio
Formato de la versión : Version 1
Formato del perfil : Layer 2
Format_Settings_Mode : Joint stereo
Modo Muxing : Header stripping
ID Códec : A_MPEG/L2
ID Códec/Pista : MP2
Duración : 40min.
Tipo de tasa de bits : Constante
Tasa de bits : 160Kbps
Canal(es) : 2canales
Velocidad de muestreo : 48,0KHz
Tamaño de pista : 46,6MB (5%)
Título : Spanish
Idioma : Español

Visitor
rckmnr
Posts: 2
Registered: ‎02-11-2012
0

Re: New Release - Firmware Version 1.08.17 for WD TV Live Streaming Media Player (5/7/12)

My WDTV was working perfectly until I put this upgrade in. Now it won't play any of my files.

 

This is absurd! Everytime you upgrade the firmware you brick my WDTV!

Honored Contributor
TonyPh12345
Posts: 17,991
Registered: ‎01-11-2010
0

Re: New Release - Firmware Version 1.08.17 for WD TV Live Streaming Media Player (5/7/12)


rckmnr wrote:

My WDTV was working perfectly until I put this upgrade in. Now it won't play any of my files.

 

This is absurd! Everytime you upgrade the firmware you brick my WDTV!


That's contradictory... If one's WDTV is bricked, you'd not be able to upgrade it.. :smileywink:. Have you reset it?
===Live SMP / Live Hub x2 / Live+ / Live x2 / 24 TBytes of QNAP + WD NAS ===
Occasional Contributor
samtroy
Posts: 5
Registered: ‎05-01-2010
0

Re: New Release - Firmware Version 1.08.17 for WD TV Live Streaming Media Player (5/7/12)

[ Edited ]

And again my question:

 

Has the "uncompressed PGS subs in MKV" bug finally been fixed with this firmware??

 

This is the *only* thing that keeps me from buying this player.

 

http://community.wdc.com/t5/WD-TV-Live-Streaming-Issue/Uncompressed-normal-PGS-subtitles-not-working...

 

Thanks in advance, S.

 

Advisor
SHoTTa35
Posts: 12
Registered: ‎01-18-2012
0

Re: New Release - Firmware Version 1.08.17 for WD TV Live Streaming Media Player (5/7/12)


Melandryu wrote:

Autoframe still not working? i tested a tv show 720p and my tv show its going at 1080p 60hz....



Auto Framerate isn't Auto resolution.

 

Your video info does show 25FPS though so i think maybe that's why it's pusing it to 30FPS then doubling it to 60. 1080p wont change however.

Forums | Ideas | News and Announcements | Register | Sign in | Help | Forum Guidelines
Copyright © 2001 - 2010 Western Digital Corporation, All rights reserved. | Trademarks | Privacy | Terms of Service | Terms of Use | Copyright | Contact WD