Thanks.
Hmm, I’ll give that a try - this is likely going to work, but I was afraid that with such config I’ll lose wi-fi on the bridged AP that way, which is critical. I’ll just have to give it at try though.
I tried NFS and it actually works! But. Only if your server advertises its exports - FreeNFS won’t work, HaneWIN will. You still have to set up port forwarding to 3 ports TCP/UDP, but otherwise no worries!
(Well, almost - the performance was really horrid but it turned out it’s my DIR-655 doing something weird, probably QoS. I bypassed it for now just for testing purposes, and the performance problem went away.
Well, note quite, as it seems now my powerline link between AP1 and AP2 can’t do better than approx. 4 MB/sec which is not enough for m2ts streams of 35Mbit/sec… Anyway these are completely different problems which have nothing to do with the WD box ;-)
Cheers
