i hooked my wdtv live hub up to an older tv through the audio video jacks and the screen obsessivly rolls i can’t do anything i need help please
Possibly …
If your TV is PAL and the Live Hub is Set to NTSC then this may be one reason
(either use a paperclip on the reset hole… press for 10 seconds to switch between PAL/NTSC)
or if you can connect the Live Hub to a Modern TV via Composite (Red,White,Yellow)
Go to Setup > Audio/Video Output > Composite > and select either PAL or NTSC
then try it on your old TV.
Also, some really ancient TV’s have a Vertical Hold adjustment knob (might be labeled V-HOLD)
1 Like
Thanks I will try that
Thanks actually it was set to PAL needed to be on N TSC
1 Like