The other WD Live Hub in the bedroom can be pinged when on or off
If you can ping it… then it’s not " off" it’s in " Standby" state. (which switches off Audio/Video Ouput … but the device’s hdd and network is still On)
Press the Power button on the Remote Control “once” for 1 second, then it’s in Standby
Press and “Hold” the Power button on the Remote Control for 5 seconds or more … for a Complete Power Off
Are you using the Geniune WD Remote on both ? (or 3rd party, like Harmony remotes ie. a Harmony remote may be powering down the Live Hub completely at a single press, while the WD remote won’t)
3 “Power States”
ON = Front LED ON, Picture and Sound ON, Network and HDD access is ON
STANDBY = Front LED OFF, Picture and Sound OFF, Network and HDD access is ON
OFF = Front LED OFF, Picture and Sound OFF, Network and HDD access is OFF