09-30-2011 12:02 PM
Hi - I recently purchased a WD Scorpio Black 500GB HD. I'm trying to use True Image to clone my current drive to it. I get as far as the option to choose the destination disk screen but the 500 GB HD is greyed out. I have the drive docked and connected via USB. From what I read in the manual, this shouldn't be an issue. Any help is appreciated.
09-30-2011 12:10 PM
Did you make sure that the drive is recognized and does work properly when coping a file manually? If you have this drive in a third party enclosure that may be the problem.
10-01-2011 02:23 PM
Hi Joe - Thanks for the reply. The drive seems to be working fine. I can copy and move files to the drive with no issue. I'm using a Startech SATA HD dock. I'll be bummed if that's the reason Acronis won't let me chose the drive. Any other suggestions?
10-01-2011 10:59 PM
Is the drive identified as WD in Device manager? If not then it probably isn't being recognized by Acronis. This version of Acronis is kind of an orphan product. It's not full featured and it's based on Acronis TI 2009 so it's also not that well supported. You might look on the Acronis forums http://forum.acronis.com/forums/acronis-discussion
12-09-2011 07:41 PM
I had the same issue. Even tried creating a boot CD with Acronis WD edition so I wouldn't be booting off the source drive at all and Windows isn't even there to interfere with the destination drive. Same result, destination drive is greyed out. It didn't matter if the new drive was unallocated/unpartitioned or partitioned or partitioned+formatted NTFS. I found a thread on the Acronis forums about this bug and the person bought the full Acronis version and ran into the same bug as in the WD edition. They got around the bug by avoiding the "clone" feature and doing a backup to an external drive then restoring the tib file to the new disk. That worked for me, the restore feature didn't grey out the destination disk as the clone feature did.
03-05-2012 11:16 PM - edited 03-05-2012 11:18 PM
download two software from wd site
1.WD Acronis true image
2. WD Align (you should input the S/N of WD disk you buy. )
3.run old disk system (in your laptop) ,install these two software,
4.then connect new disk with usb port to laptop
5. run WD Align to new disk .
till this step，when old disk in laptop and new connected with usb,
acronis true image clone can finished ,no grey bar appear again,but something go wrong, when boot system from new disk a error "read disk error" occured.
then I made reverse clone.
1. made a acronis true image bootable CD (use acronis media builder)
2. put new disk in laptop and old one out connected with usb.
3.boot system with CD ,
use clone function . can use "automatically " style .
then It clond successfully .
restart new disk system without boot cd and usb , it's fine.