Occasional Contributor
Posts: 2
Registered: ‎05-28-2012

bad sectors on WD Elements SE Portable

[ Edited ]

Sorry in my last post i did forget to mention that the drive says it has bad sectors. I t was working the previous night.

i also did an extented test on the drive the results are below.

western digital 500 gig hard drive
data error (cyclic redundancy check)
master boot record (MRB)
Model Number: WD Elements 1023
Unit Serial Number: [Deleted]
Firmware Number: 2005
Capacity: 500.11 GB
Test Result: FAIL
Test Error Code: 08-Error was detected while repairing bad sectors.
Test Time: 15:43:44, May 15, 2012

Honored Contributor
Posts: 3,894
Registered: ‎04-04-2011

Re: bad sectors on WD Elements SE Portable

The drive needs to be replaced


Contact WD to start  RMA process

Click the Kudos star to say thank you for helpful posts and be sure to come back and 'Accept as Solution' under options for the post that solved your issue.
Forums | Ideas | News and Announcements | Register | Sign in | Help | Forum Guidelines
Copyright © 2001 - 2015 Western Digital Technologies, Inc. All rights reserved. | Trademarks | Privacy | Community Terms of Service | Site Terms of Use | Copyright | Contact WD