Reply
Occasional Advisor
wizz_g
Posts: 6
Registered: ‎06-13-2010
0

USE ON BOTH MAC AND PC - My Passport

I recently moved to Mac but still use Windows XP a lot. I don't have any unrecognition issues that many seem to have from the back and forth use. Although My WD Passport SE works perfectly on XP, it is read-only on my Mac. Any ideas on how I can get to write on it as well using Mac? 

PS: I'm not using the Smartware - just basic drive storage functions...

Community Manager
Bill_S
Posts: 7,573
Registered: ‎11-24-2009
0

Re: USE ON BOTH MAC AND PC - My Passport

No, you won't be able to.  These drives use hardware encryption, and if you try to format with FAT 32, you will damage the drive.


Click the Kudos star to say thank you for helpful posts. And be sure to come back to click the 'Accept as Solution' button for the post that solved your issue. This may help someone else.
Occasional Advisor
wizz_g
Posts: 6
Registered: ‎06-13-2010
0

Re: USE ON BOTH MAC AND PC - My Passport

Thanks for your response.

 

Just to clarify, when I right click on the drive (in Mac OS X) then click 'Get info'; the "Sharing & Permissions' caption states "You can only read." There is no simple setting I can change to make it say "You can read and write" as it does for a flash disk?

Esteemed Contributor
thanarath
Posts: 313
Registered: ‎02-03-2010

Re: USE ON BOTH MAC AND PC - My Passport

[ Edited ]

If you are really, really want to do that you need to read these first:

  • The up side: you can read and write to it from Mac and PC.
  • The down side:  the files size is limited to less than 4GB each. Meaning if you try to copy a file size bigger than 4GB it will give you an error or not work. You can not use Time machine with the drive. If you allow Time Machine to configure the drive, all of your data will not be read or write from PC. 

If you have decided to go for it,

You must back up all of the data to either your PC or MAC internal hard disk drive.

Formatting the drive will erase all data.

 

After you have done backing up, connect the Passport drive to your Mac computer.

Bring up the Disk Utility,

Select the Passport drive,

Select Partition, Under Volume Scheme choose 1 partition,

Under Options, choose Master Boot Record and hit OK,

Under Format, choose MS-DOS (FAT), then hit Apply to format the drive.

After that the Passport drive is formatted and it is able to read and write from Mac and PC.

 

If you right click on the drive (in Mac OS X) then click 'Get info'; the "Sharing & Permissions' caption states

It will show read and write.

Now you can take it to either Mac or PC to start writing to it.

Click the Kudos star to say thank you for helpful posts. And be sure to come back to click the 'Accept as Solution' button for the post that solved your issue. This may help someone else.
Forums | Ideas | News and Announcements | Register | Sign in | Help | Forum Guidelines
Copyright © 2001 - 2014 Western Digital Technologies, Inc. All rights reserved. | Trademarks | Privacy | Community Terms of Service | Site Terms of Use | Copyright | Contact WD