About table zon, firmware module 01


ERmorel wrote:

 

zio_mangrovia,

 

Can you please provide more information about your situation? Are you trying to update the firmware of the internal drive?

    • *> I have WD10EARS-22Y5B1 where I can I can read the same firmware from pcb BIOS both by WDR and by Sediv software, the files are just alike. There is error to read module 01 in table zone in Sediv log file.> So I’d like to be sure problem is firmare modules, or damaged sectors of modules or faulty pcb.
      Can you suggest me some step to be sure for detailed diagnostic?
      I can listen motor is spinning up when I link power on but after few seconds motor stops!
      I ordered new so I’ll flash my rom into new pcb as soon as it will arrive.> If I mount my damage hdd (2nd sata channel)to pc and I run windows, Computer reset in POST stage before Windows starts.> sedive logs:> Action: Try Read Family Name… OK!

Family Name: Unknown

Version ROM FW: 00150031

Version SA FW:

Version FW Not Read!

Action: Read APB… OK!

Action: Read Drive Table… OK!

Action: Read Zone Table… Error: Full version only!

Action: Read Resident file: 000B… OK! (Active)

Action: Read Resident file: 020B… OK! (Not Active)

Action: Read Resident file: 000B… OK!

Action: Read Flash… OK!

Action: Read Resident file: 000B… OK! (Active)

Action: Read Resident file: 020B… OK! (Not Active)

Action: Read Resident file: 000B… OK!

Action: Read Resident file: 0001… Error: Full version only!

Action: Read Resident file: 000A… OK!

Save Data(Read Flash Module: 0A) OK

Action: Read Resident file: 000B… OK!

Save Data(Read Flash Module: 0B) OK

Action: Read Resident file: 020B… OK!

Save Data(Read Flash Module: 20B) OK

Action: Read Resident file: 0030… OK!

Save Data(Read Flash Module: 30) OK

Action: Read Resident file: 0047… OK!

Save Data(Read Flash Module: 47) OK

Action: Read Resident file: 000D… OK!

Save Data(Read Flash Module: 0D) OK

Action: Read Resident file: 004F… OK!

Save Data(Read Flash Module: 4F) OK

Action: Read Resident file: 0001… Error: Full version only!

--------------------------------- Local Exit --------------------------------

DIR Module Read Error!

 > > > > 1 tb WD caviar green - sata/64 MB cache

paper label on pcb: 2061-771640-BO3 AC  XC BJ12 0HBD G 0007230 1237
text written on directly on PCB : 2060-771640-003 REV A
MDL: WD10EARS-22Y5B1
DATE: 17 DEC 2010

BIOS SHOWS 0 size!
DCM: DGNNHT2CHB
DCX: 6017YM153
s/n: WCAV5M063472