WDC WD1003FBYX-70Y7B0 Hard Drive Failure

I recently ran into a hard drive issue with one of the servers I was working on. Below is the output of the test I ran on the hard drive.  Is there any fix, or should I RMA it? Thanks in advance.

Test Option: QUICK TEST
Model Number: WDC WD1003FBYX-70Y7B0
Unit Serial Number: WD-[deleted]
Firmware Number: 01.01V03
Capacity: 1000.20 GB
SMART Status: FAIL
Test Result: FAIL
Test Error Code: 06-Quick Test on drive 1 did not complete! Status code = 04 (Unknown failed test element), Failure Checkpoint = 96 (Unknown Test) SMART self-test did not complete on drive 1!
Test Time: 14:14:24, September 15, 2014

Test Option: EXTENDED TEST
Model Number: WDC WD1003FBYX-70Y7B0
Unit Serial Number: WD-[deleted]
Firmware Number: 01.01V03
Capacity: 1000.20 GB
SMART Status: FAIL
Test Result: PASS
Test Time: 17:26:16, September 15, 2014

Hello,

The results show the drive has failed the Smart test. I recommend you get this drive replaced.

How to get an RMA, (Return Merchandise Authorization) or replace a defective product under warranty 

1 Like