Hi, i’m kinda having similar problem but i didn’t know there is a log file but i saved the result in .txt.
and I don’t see an option to upload a txt file here. How do i do it? I have screenshots too if you want to see.
Sorry i am new to forums, can you please help check the errors? and what is the next step for me?
Test Option: QUICK TEST
Model Number: WDC WD10EARS-00Y5B1
Unit Serial Number: WD-WCAV55747188
Firmware Number: 80.00A80
Capacity: 1000.20 GB
SMART Status: PASS
Test Result: FAIL
Test Error Code: 06-Quick Test on drive 2 did not complete! Status code = 07 (Failed read test element), Failure Checkpoint = 97 (Unknown Test) SMART self-test did not complete on drive 2!
Test Time: 04:22:22, October 13, 2010
Test Option: QUICK TEST
Model Number: WDC WD10EARS-00Y5B1
Unit Serial Number: WD-WCAV55747188
Firmware Number: 80.00A80
Capacity: 1000.20 GB
SMART Status: PASS
Test Result: FAIL
Test Error Code: 06-Quick Test on drive 2 did not complete! Status code = 07 (Failed read test element), Failure Checkpoint = 97 (Unknown Test) SMART self-test did not complete on drive 2!
Test Time: 04:22:53, October 13, 2010
Test Option: QUICK TEST
Model Number: WDC WD10EARS-00Y5B1
Unit Serial Number: WD-WCAV55747188
Firmware Number: 80.00A80
Capacity: 1000.20 GB
SMART Status: PASS
Test Result: FAIL
Test Error Code: 06-Quick Test on drive 2 did not complete! Status code = 07 (Failed read test element), Failure Checkpoint = 97 (Unknown Test) SMART self-test did not complete on drive 2!
Test Time: 04:23:27, October 13, 2010
Test Option: QUICK TEST
Model Number: WDC WD10EARS-00Y5B1
Unit Serial Number: WD-WCAV55747188
Firmware Number: 80.00A80
Capacity: 1000.20 GB
SMART Status: PASS
Test Result: FAIL
Test Error Code: 06-Quick Test on drive 2 did not complete! Status code = 07 (Failed read test element), Failure Checkpoint = 97 (Unknown Test) SMART self-test did not complete on drive 2!
Test Time: 04:25:39, October 13, 2010
Test Option: EXTENDED TEST
Model Number: WDC WD10EARS-00Y5B1
Unit Serial Number: WD-WCAV55747188
Firmware Number: 80.00A80
Capacity: 1000.20 GB
SMART Status: PASS
Test Result: FAIL
Test Error Code: 08-Too many bad sectors detected.
Test Time: 08:54:11, October 13, 2010
EDIT : Well i think i need to RMA it but recently i wiped everything in the HDD using jetico BCWipe, random 1 pass, after that is done, i tested again using quick test and extended test, it passed! but when i tried again after a few hours quick test failed again and again just like before, write zeroes (quick) passed but it says cannot update disk error just after it finishes writing zeroes.
Quick test fails until now and i’m still doing the extended tests…it’s taking a few good hours.
So any ideas, anyone? RMA?
