Reply
Occasional Contributor
sparker781
Posts: 7
Registered: ‎05-25-2013
0

SE16 (SATA II) Drive

Hey all thanks for stopping by.

 

I was able to download the software for my drive but no matter what I do the application will not run.  I am trying to test my drive for errors.  Windows does it almost every time I reboot my machine and on another forum someone suggested I run the diagnostic application for my drive.

 

Help!!

 

Thanks

Respected Contributor
DavidSucesso
Posts: 1,107
Registered: ‎06-28-2010
0

Re: SE16 (SATA II) Drive

What does your drive has?
Occasional Contributor
sparker781
Posts: 7
Registered: ‎05-25-2013
0

Re: SE16 (SATA II) Drive

I dont understand what you mean

Community VIP
Hammey
Posts: 919
Registered: ‎02-04-2010
0

Re: SE16 (SATA II) Drive

Hi windows will want to check your drive if it does not shutdown properly like if it auto reboots or it is shut down by the power button not by going start shutdown. The data lifeguard for windows from this link is what you should be using.  http://support.wdc.com/product/download.asp?groupid=606&lang=en  if that will not work try a copy of Hard Disk sentinel it will test the drive and give you a report also in hd sentinel check the smart data tab for errors in there.

Forums | Ideas | News and Announcements | Register | Sign in | Help | Forum Guidelines
Copyright © 2001 - 2014 Western Digital Technologies, Inc. All rights reserved. | Trademarks | Privacy | Community Terms of Service | Site Terms of Use | Copyright | Contact WD