Hello Vince,
There is only one font with the WDTV Hub & SMP. All that can be changed is the size and colour.
I am not sure I understand what you mean with the second part.
Stephen.
Hello Vince,
There is only one font with the WDTV Hub & SMP. All that can be changed is the size and colour.
I am not sure I understand what you mean with the second part.
Stephen.
good excellent job.
Hello Vince,
I am sorry, I meant I wasnāt sure about the sentence below.
When we change the font nothing happens itās change only in services and there is no font when i brose my video.
Stephen.
Itās not important.Ā
I want to say: I canāt change the backgrounds. I only see the background when i use service like TV. But not when i browse my videos.
donāt worry if you donāt understand .
I have the theme i want .Ā
I understood i can only change colors.
thanks again.
Iāve been tinckering around with this theme the past couple of months and I must say, job well done. I donāt think I want to use another theme as iām totally addicted to this one now.
Cheers
iāve had a quick read but couldnāt find anything.
is it possible to remove views? all i want is list and gallery and whatever the 8x3 view is called.
thanks in advance!
No, itās not possible to remove or delete views
Itās only possible to give the offending view just a āBlank Black ScreenāĀ to avert your eyes Ā
Hi everyoneā¦ this is my first post ;). May I know in which version I can get this wall movie?. And what file should I delete if I want to use default Mochi home screen?. Thank you in advance.
Itās on page 3 of this thread 10x3 Preview
But, you have to extract the .rar , add a meta.xml file and rezip using .zip at root level if you wish to upload the theme to the WDTV SMP (Live Streaming)
There is no modification to the Mochi Home Screenā¦
To save time and frustration, i have done all of the above for you
http://www.mediafire.com/download/9ar81ei3hoacn7c/10x3+preview.zip
Theme install instructions:
To install the theme, download the zip file to your PC, open your web browser (I donāt recommend using IE8or9, there have been issues), then type your SMPās IP address to open the Web UI.Ā Ā Type in your password (the default is āadminā), click on the box next to āI acceptā and then click on LOGIN, then click on āAppearanceā, then click on āBrowseā and navigate to where you saved the ā10x3 preview.zipā file, then click on āOpenā.
Click on āSubmitā, then once the Web UI finishes uploading the theme, on you SMP press āSetupā on your remote, select āAppearanceā, then select āUser Interface Themesā, select ā10x3 previewā then when prompted select āApply themeā.
Omgā¦ thanks a lot Joey. Iāve followed this forum quite long and noticed that youāre very smart & helpful.Ā People like you make this forum very useful.Ā
How can I give you Kudos? is it by clickin Kudos button under your profile picutre?. (sorry newbie here lol)
Thanks.
no probsĀ
yep, just click the kudoās star below my avatar pic
Hello, I installed the theme SteArm - Number 6.2 (huntanzi85) (8x3 Titles)
I wanted to know one thing you can change background to my liking?
one last thing, you can also put a cover on the hard disk folder before you enter the folder?
the last thing that is very important.
how come when a folder there are multiple video files can not be run all?
but Iām forced to see one at a time and then click on the second episode
very uncomfortable thing for those who see this TV series
you can do anything?
thank you
Hello linguaccia22,
I have altered the theme to use any background. Just add your backgrounds using the options button in Photos.
Setup > Appearance > User Interface Backgrounds > Your Backgrounds
I have added the Linksheets/thumbnails icons from AlaskaDARK_DRIVE_ICONS by JoeySmyth to the theme. They are disk-0, Elements, SEAGATE500, TERABYTE1, TERABYTE2 and WDTVLiveHub.
You can rename any of these files to name of your hard disk (case sensitive) or add your own jpg image for the hardĀ disk and delete the file extension. Then re-zip the theme at the lowest compression setting (store).
The Linksheets/thumbnails icons donāt work in Gallery view.
AlaskaDARK_DRIVE_ICONS by JoeySmyth
http://community.wd.com/t5/WD-TV-Live-Hub-Discussions/Cover-thumbnail-for-drives/td-p/586753
I canāt help you about the last part, sorry.
Stephen.
SteArm 6.2 (linguaccia22) (RV-BG).zip (340.21KB)
https://www.mediafire.com/?3uvprhgg85bvstg
Thank you for having responded to me
I do not understand the last link cāosĆØ sincerely??
SteArm 6.2 (linguaccia22) (RV-BG). Zip (340.21KB)
https://www.mediafire.com/?3uvprhgg85bvstg
now there are even more covers to various folders.
but honestly this is the last thing covers my thoughts.
because the thing I need is more and to play various episodes that I have in a folder
I do not understand why if there are 22Ā episodes in a folder and I select the first episode after the second episode does not start by itself. but I always have to start it I: (
I also clicked the play button before starting the first episode but nothing
as if that key does not work. only works OK
how so?
Hello linguaccia22,
I do not understand the last link cāosĆØ sincerely??
SteArm 6.2 (linguaccia22) (RV-BG). Zip (340.21KB)
https://www.mediafire.com/?3uvprhgg85bvstg
The last link is for a modified version of SteArm - Number 6.2 (huntanzi85) (8x3 Titles). You can now change the background image and have hard drive icons. But I made a mistake with two of the video views which I have corrected. Below is the fix.
SteArm 6.2(linguaccia22)(RV-BG)(fix).zip (339.12KB)
https://www.mediafire.com/?qkz8sacrieyzc12
but honestly this is the last thing covers my thoughts.
because the thing I need is more and to play various episodes that I have in a folder
I do not understand why if there are 22 episodes in a folder and I select the first episode after the second episode does not start by itself. but I always have to start it I: (
I also clicked the play button before starting the first episode but nothing
as if that key does not work. only works OK
how so?
I have found this. Playback mode by default
http://community.wd.com/t5/WD-TV-Themes/Playback-mode-by-default/m-p/571706#M11844
You will be able to play all the 22 episodes in the folder by changing the following setting.
Setup > Video Settings > Video Playback Sequence > Repeat All
And press the PLAY button (not the OK button) and the episodes one after another. But it will loop back to the first episode after the final episode finishes.
Stephen.
I feel better.
and much more fluid. to switch to the second card of the film takes less time lags a little while.
I ask SteArm can implement in version 6.2 (pharma6) (1). zip (156.83KB)
the title of the film when it is running?
But now comes the only bar on how hard the film and when it ends but not the title of the movie you have to get out of the movie to see the title
you can add? or slow down after this change goes to the list of films when you scroll?
regarding the PLAY button you can not reactivate it?
because I changed configuration ā Video Settings ā Video Playback Sequence ā Repeat all
but when I go to the folder with the 22 episodes the PLAY button does not work.
I apologize if I do not understand something or do not understand you
but Iām using google translator to communicate with you
I do not know why the English language: (
greetings from Italy
Hello linguaccia22,
and much more fluid. to switch to the second card of the film takes less time lags a little while.
The main reason for the lag in 6.2(linguaccia22)(RV-BG)(fix) is because of the linksheets/thumbnails for the hard drive icons, removing the linksheets/thumbnails will remove the lag.
I ask SteArm can implement in version 6.2 (pharma6) (1). zip (156.83KB)
the title of the film when it is running?
But now comes the only bar on how hard the film and when it ends but not the title of the movie you have to get out of the movie to see the title
you can add? or slow down after this change goes to the list of films when you scroll?
I originally didnāt include the title, because simply I didnāt want it. But I have added the title to the video playback files.
I have done two modified versions of 6.2 (pharma6) (1)
SteArm 6.2 (linguaccia22)(pharma6).zip (157.6KB) - Added the title of the film to the video playback.
https://www.mediafire.com/?z7z400idd2djds8
SteArm 6.2 (linguaccia22)(pharma6)(RV-BG).zip (159.39KB) - Same as above and the background can be changed.
https://www.mediafire.com/?64v6z5bca8369pg
regarding the PLAY button you can not reactivate it?
because I changed configuration -> Video Settings -> Video Playback Sequence -> Repeat all
but when I go to the folder with the 22 episodes the PLAY button does not work.
I donāt how to help you any further with this other than the link in my previous post, sorry.
Stephen.
very nice I make you my heartfelt congratulations.
to make it go even more fluid as it is already now what you could take?
I have seen that there are spaces between a film to another is possible to remove the space?
so as to get some extra jailer?
you can recover in the second start of the western digital?
sorry but when you see some TV series and has so many episodes in a folder, how do you make autoplay other episodes?
because before this issue installavo the PLAY button in a folder worked
changing something so she can not reactivate the play button? to automatically play the file?
thank you
Hello linguaccia22,
I have seen that there are spaces between a film to another is possible to remove the space?
so as to get some extra jailer?
I remembered doing a version of 6.2 (pharma6) (1) with smaller gaps. I have put the link below as well as another link with a version where you can change the background.
SteArm_6.2(pharma6)_(2).zip
http://www.mediafire.com/?3trsvfilh7fmx42
SteArm 6.2 (linguaccia22)(small)(RV-BG).zip (159.39KB)
https://www.mediafire.com/?ezdbh2red2pauor
I tried removing the space between the thumbnails, but I think it looks a mess. There is a link below for you to try if you want. I have used ātableā instead of the normal āwrapperā so I could include colspacing=ā0ā rowspacing=ā0ā to the file rv_video_browse_page.xml.
If you change the values colspacing=ā0ā rowspacing=ā0ā in the file rv_video_browse_page.xml to colspacing=ā5ā rowspacing=ā5ā you will have a 5 pixel gap between the thumbnails. You will have to re-zip the theme with no compression or store.
SteArm 6.2 (linguaccia22)(pharma6)(nogap).zip (165.86KB)
https://www.mediafire.com/?eruipvno8i99fuv
you can recover in the second start of the western digital?
ā¦Erm. I think something has gotten lost in translation there.
sorry but when you see some TV series and has so many episodes in a folder, how do you make autoplay other episodes?
because before this issue installavo the PLAY button in a folder worked
changing something so she can not reactivate the play button? to automatically play the file?
The link for āPlayback mode by defaultā should autoplay the other episodes.
http://community.wd.com/t5/WD-TV-Themes/Playback-mode-by-default/m-p/571706#M11844
When my WDTV Hub starts to have problems. I hold the standby button for about 3-5 seconds to power it down and then press standby to start it. Or select Setup > System > Device Restart. Both of them reboots the WDTV. Itās amazing how many problems this can solve.
Stephen.
Stephen hello, how are you?Ā
Long time since I came last time in the forum, Iām glad you are still active.Ā
After nearly a year of using the magnificent theme that made me, I would like to introduce two modifications.
The theme isĀ SteArm 5 (Leycero 6 fix)
1st - Add a fifth icon (files) on the next screen.
2 - When using āmultiple selectionā
Ā
Ā files are selected
but can not see selected
it should look like in the picture below
Well, thank you for the help and sorry for my English. (I used google translator).
If you do not understand something, please comment it, Iāll try to explain better.
Salutations, Leycero